CYP

SDV-C2-RX - UHD+ HDMI AV over IP Receiver

SDV-C2-RX HDMI over CAT SDVoE (4K UHD, 4K HDR, HDMI, USB/KVM, 10Gbit/s)
Hover over the image to zoom

CYP

SDV-C2-RX - UHD+ HDMI AV over IP Receiver

Close reviews

Leave a review

The SDV-C2-RX is designed for high-quality, IP routable, AV extension over a 10G IP Network with minimum latency. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K audio/video streams (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio can be transmitted in pass-through mode.

The use of high quality 10 Gigabit Ethernet ports and Cat.6A or better cable allows for point-to-point transmission of the video signal up to 100m. Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, USB 2.0, and Ethernet.

  • Features
    • HDMI 2.0 and DVI 1.0 compatible
    • HDCP 2.2 and HDCP 1.x compliant
    • 1 Cat.6A input
    • 1 HDMI output
    • 1 analog stereo input & 1 analog stereo output
    • 2 USB 2.0 (Type-A) ports and 1 USB 2.0 (Mini-B) port 
    • IP routable with minimum latency (requires optional IP Master Controller or control software)
    • Ultra-light compression, lossless for most content
    • Extension up to 100m in Point-to-Point mode (with Cat.6A cable)
    • Supports independent breakaway A/V matrix switching with minimum latency, video wall generation, and multi-view compositing (requires optional IP Master Controller/control software)
    • Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Bypass modes only)
    • Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream from HDMI or DP sources
    • Analog stereo audio extension, insertion and extraction (insertion and extraction requires optional IP Master Controller/control software
    • Unit can be powered directly by PoE when connected to a 10 Gigabit Ethernet (10GbE) switch that provides PoE (802.3at)
    • Basic configuration via front panel buttons with an OSD
    • Supports the use of an external control center (IP Master Controller) or control software to provide expanded functionality (Contact your authorized dealer for more information)
  • Specification
    Inputs 1x RJ45 [1x SDVoE CAT HDMI & Propriety Data]
    1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)]
    1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
    1x Phoenix (3 pin) [1x RS-232]
    1x RJ45 [1x LAN  Propriety Data]
    1x USB Micro [1x Service Port Propriety Data]
    Outputs 1x HDMI [1x HDMI Uncompressed AV and Data]
    2x USB Type A [2x Propriety Data]
    1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)]
    1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
    POE PSU: PoE
    PSU: 12V/3A
    Dimensions 108mm [W] x 231mm [D] x 25mm [H] 
    Net Weight 700g 
    Gross Weight 1700g 
SKUSDV-C2-RX
£0.00
£1,521.24
Reward points:0

This item is currently out of stock. We’ll notify you when it’s back in stock if you enter your email address in the box below..

Recommend to a friend