CYP

SDV-CS8 - SDVoE System Controller and Configurator

SDV-CS8 SDVoE System Controller and Configurator
Hover over the image to zoom

CYP

SDV-CS8 - SDVoE System Controller and Configurator

Close reviews

Leave a review

  • Effortless Configuration - WebGUI helps make configuration such as channel routing, video zones grouping, and preset defining easy, providing a flexible solution for controlling SDVoE extenders within the same network.
  • Various Modes - SDV-CS8 supports controlling the matrix, video wall and multiviewer modes of SDVoE extenders depending on the scaler mode, and switch instantly between selected video transmitters.
  • Simple Setting Access - Settings of all connected units, including IP address, subnet mask, and extender status are clearly displayed within WebGUI, which is easily access via web browser over network or by connecting an HDMI display and  USB to SDV-CS8.
  • Wide Application - A trigger input interface can be installed within a lectern of a classroom or a table of conference room, allowing users to activate stored presets with the simple press of a button.
  • Features
    • Enables the management and configuration of multiple compatible SDVoE extenders through a single WebGUI
    •  Control over matrix, video wall, and multi-viewer modes using WebGUI presets 
    • Rapid Switching time between transmitters
    •  Definable display groups 
    • WebGUI clearly displays the status of all connected Transmitters and Receivers, including IP address, channel selection
    • HDMI output displays the WebGUI and system status 
    • Dual LAN ports enable control over the local network as well as independant access to the controller separate to the distribution network
    •  Supports the use of a USB mouse and keyboard providing control of the WebGUI (Optional)
    • Can be powered directly by Power over Ethernet (PoE) when connected to an Ethernet switch that follows the 802.3af PoE standard
    • Trigger Control Keypad support for simple single-button preset activation
    • Standard control is available via WebGUI (remote or local), RS-232, Telnet, IR Remote and triggers 
  • Specification
    Inputs 2x RJ45 [2x Individual Network IP]
    1x Phoenix (3 pin) [1x RS-232]
    1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
    1x Phoenix (10 pin) [1x Trigger In (8)]
    1x USB Type A [1x Service Port Propriety Data]
    Outputs 1x HDMI [1x HDMI Uncompressed AV and Data]
    POE PSU: PoE
    PSU: 5V/2.6A
    Dimensions 135mm [W] x 117mm [D] x 25mm [H] 
    Net Weight 0.64kg
    Gross Weight 1.066kg
  • Downloads
    PDF
    SDV-CS8 Manual
SKUSDV-CS8
£0.00
£1,178.52
Reward points:0

This item is currently out of stock. We’ll notify you when it’s back in stock if you enter your email address in the box below..

Recommend to a friend