PUV-2606RX - Standard HDBaseT2 Receiver for the Reverse Power PUV-2600 Series

PUV-2606RX - Standard HDBaseT2 Receiver for the Reverse Power PUV-2600 Series
Hover over the image to zoom


PUV-2606RX - Standard HDBaseT2 Receiver for the Reverse Power PUV-2600 Series

Close reviews

Leave a review

The PUV-2606RX HDBaseT2 Receiver is the standard RX within the reverse PoH (RX powers TX) PUV-2600 series, it offers a simple solution for receiving uncompressed HD audio and video, as well as Ethernet and control, via a single run of Cat.6/7 cable over distances of up to 100 meters.

Multiple data and control signal types are supported, including USB 2.0, IR, RS-232 and LAN connections. An independent balanced analogue stereo audio output is also provided to easily de-embed the extended stereo audio signal. The HDBaseT input supports receiving resolutions up to a maximum of 4K@30Hz (4:4:4, 8-bit) or 4K@60Hz (4:2:0, 8-bit) from a compatible HDBaseT Transmitter.

When paired with the standard PUV-2608TX or the more advanced EL-2600V, the PUV-2606RX has switchable USB 2.0 host (Type B) connections available (1 for the remote TX, 1 for the RX) which can connect to devices on up to 6 USB 2.0 (Type A) ports (3 on the TX, 3 on this RX) forming a highly flexible KVM extension configuration (Note: Only 1 USB host may be active at a time).

The PUV-2606RX (PSE) can provide PoH (Power over HDBaseT) power to the connected PUV-2600 series HDBaseT Transmitter (PD) (compatible TX's only), allowing for greater flexibility within different installation scenarios. USB host selection is controlled via a front panel button.

  • Features
    • HDMI 2.0 and DVI 1.0 compatible
    • HDCP 2.2 and HDCP 1.x compliant
    • HDBaseT 2.0 compatible
    • 1 HDBaseT input and 1 HDMI output
    • 3 USB 2.0 Type A ports and 1 USB 2.0 Type B port
    • Supports HDBaseT input resolutions up to 4K@60Hz (4:2:0, 8-bit)
    • HDMI output supports resolutions up to 4K@60Hz (4:2:0, 8-bit)
    • HDBaseT input receives video, audio, and data over a single Cat.5e/6/7 cable and can reach distances up to 100m/230ft at 4K when using Cat.6a/7
    • HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet, PoH (PSE), and control (bi-directional IR/RS-232/USB 2.0)
    • Supports CEC bypass
    • Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream from HDMI sources
    • Reception of independent analogue stereo audio extension
    • Flexible USB host selection using the front panel button: Note: Multiple USB hosts may be connected at once (up to 2 total, between the Tx and a compatible Rx unit) with a single selected host active at a time
    • Supports local power, or power via PoH from Receiver (PSE) to Transmitter (PD) (compatible Receivers only)
    • Controllable via a front panel button
  • Specification
    Inputs 1x RJ45 [1x HDBaseT  HDMI & Propriety Data]
    1x USB Type B [1x USB  Propriety Data]
    1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
    Outputs 1x HDMI [1x HDMI Uncompressed AV and Data]
    1x Phoenix (5 pin) [1x Analogue Stereo (Balanced or Unbalanced)]
    3x USB Type A [3x USB Propriety Data]
    1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
    1x RJ45 [1x LAN Serving]
    PSU: 24V/2.7A
    Dimensions 231mm [W] x 108mm [D] x 25mm [H] 
    Net Weight 600g 
    Gross Weight 1300g 
  • Downloads
    PUV-2606RX Data Sheet
    PUV-2606RX Manual
Reward points:0

This item is currently out of stock. We’ll notify you when it’s back in stock if you enter your email address in the box below..

Recommend to a friend