SDV-FTRX - SDVoE 18Gbps HDMI over fiber Transceiver Extender (HDMI, HDCP2.2, HDMI2.0)
SDV-FTRX - SDVoE 18Gbps HDMI over fiber Transceiver Extender (HDMI, HDCP2.2, HDMI2.0)
- Flexible in Installations - SDV-FTRX is designed to transmit data and control signals, insluding IR, USB and Ethernet, and can be function as either transmitter or receiver; the use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 30km (depends on the SFP+ modules used).
- High Quality Transmission - Using a sophisticated ultra-light compression, 4K HDR video signals, via HDMI or Displayport, are transmitted over a 10G IP Fiber network with zero latency and without lossing any signal; advanced HDMI content, 10-bit colour and HD Bitstream audio can be transmitted in pass-through mode.
- Advanced Function - With additional control center, multiple tranceivers can be used together as a distributed video matrix, a multiviewer system, or a video wall system, creating IP switchable with minimim latency and independent breakaway A/V matrix switching.
- Simple Configuration - Basic configuration of the unit can be achieved via front panel buttons with an On-Screen Display (OSD).
- Features
- HDMI 2.0 and DVI 1.0 compatible
- HDCP 2.2 and HDCP 1.x compliant
- Can be configured to function as either a Transmitter or a Receiver
- 1 HDMI and 1 DisplayPort input
- 1 HDMI output (Functions as local monitor output in Transmitter mode)
- 1 analog stereo jack (switchable between input/output mode)
- IP switchable with minimum latency (requires optional control center or control software)
- Ultra-light compression, lossless for most content
- Extension up to 30km (depending on the fiber module used)
- Independent breakaway A/V matrix switching (requires optional control center or control software)
- Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Genlock mode only)
- Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI or DisplayPort sources
- Analog stereo audio extension, insertion and extraction (insertion and extraction requires optional control center or control software)
- Bi-directional LAN, IR, RS-232 & USB 2.0 extension
- Signal transmission interfaces with 10-Gigabit Ethernet switches via XFI, IEEE 802.3ae, compatible SFP+ fiber modules
- Basic configuration via front panel buttons with an On-Screen Display (OSD)
- Specification
Inputs 1x HDMI [1x HDMI Uncompressed AV and Data]
1x SFP + [1x RX Mode - SDVoE fiber LC/PC-LC/PC Duplex MM OM3]
1x 3.5mm Stereo mini-jack [1x TX mode - analogue Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x Phoenix (3 pin) [1x Reserved for future use RS-232]
1x Display Port [1x Uncompressed AV]
1x RJ45 [1x GbE LAN Serving]
1x USB 3 Type B [1x Service Port Power & Data]Outputs 1x HDMI [1x HDMI Uncompressed AV and Data]
1x SFP + [1x TX mode - SDVoE fiber LC/PC-LC/PC Duplex MM OM3]
1x 3.5mm Stereo mini-jack [1x RX mode - analogue Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]PSU: 12V/3A Dimensions 231mm [W] x 158mm [D] x 25mm [H] Net Weight 0.932kg Gross Weight 1.800kg - Downloads
SDV-FTRX Manual
SKUSDV-FTRX
Recommend to a friend
