CYP

SDV-CTRX - SDVoE 18Gbps HDMI over CAT Transceiver Extender (HDMI, HDCP2.2, HDMI2.0)

SDV-CTRX SDVoE 18Gbps HDMI over CAT Transceiver Extender (HDMI, HDCP2.2, HDMI2.0)
Hover over the image to zoom

CYP

SDV-CTRX - SDVoE 18Gbps HDMI over CAT Transceiver Extender (HDMI, HDCP2.2, HDMI2.0)

Close reviews

Leave a review

The SDV-CTRX is designed to transmit, 4K HDR (6G) signals over a 10G IP Network with almost zero latency. Every Transceiver can be configured to function as either a Transmitter or a Receiver, providing additional flexibility for any installation. Using a sophisticated ultra-light compression (lossless for most content) it’s the perfect solution for extending 4KHDR video (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio can be transmitted in pass-through mode. Multiple control and data signals may also be transmitted along with the audio and video, including IR, (RS-232 Future Development) USB (for KVM) and Ethernet.

Multiple Transceivers may be combined with one or more 10-Gigabit Ethernet switches and the units can be used together to form a distributed video matrix, a multi-viewer system, or a video wall system adding to their flexibility in large event installations (Control Hardware Required). The built-in EDID and HDCP management offers additional installation flexibility. Basic configuration of the unit can be achieved via front panel buttons with an On-Screen Display (OSD). Advanced control requires optional control software and a LAN connection.

  • Features
    • HDMI 2.0 and DVI 1.0 compatible 
    • HDCP 2.2 and HDCP 1.x compliant 
    • Can be configured to function as either a Transmitter or a Receiver 
    • 1 x HDMI and 1 x DisplayPort input
    • 1 HDMI output (Functions as local monitor output in Transmitter mode) 
    • 1 x analogue stereo jack (switchable between input/output mode) 
    • IP switchable with minimum latency (requires optional control hardware or control software) 
    • Ultra-light compression, lossless for most content 
    • Independent breakaway A/V matrix switching (requires optional control center or control software) 
    • Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Genlock mode only) 
    • Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI or DisplayPort sources 
    • Analogue stereo audio extension, embedding and de-embedding (insertion and extraction requires optional control hardware or control software)
    • Bi-directional LAN, IR, RS-232 & USB 2.0 extension 
    • Signal transmission interfaces with 10-Gigabit Ethernet switches via XFI, IEEE 802.3ae
    • Basic configuration via front panel buttons with an On-Screen Display (OSD) 
  • Specification
    Inputs 1x HDMI [1x HDMI Uncompressed AV and Data]
    1x 3.5mm Stereo mini-jack [1x TX mode - analogue  Stereo(L/R)]
    1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
    1x Phoenix (3 pin) [1x Reserved for future use RS-232]
    1x RJ45 [1x GbE LAN Serving]
    1x USB 3 Type B [1x Service Port Power & Data]
    1x RJ45 [1x RX mode - SDVoE CAT  HDMI & Propriety Data]
    Outputs 1x HDMI [1x HDMI Uncompressed AV and Data]
    1x 3.5mm Stereo mini-jack [1x RX mode - Analogue Stereo(L/R)]
    1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
    1x RJ45 [1x TX mode - SDVoE CAT HDMI & Propriety Data]
    PSU: 12V/3A
    Dimensions 231mm [W] x 108mm [D] x 25mm [H] 
    Net Weight 0.62kg
    Gross Weight 1.40kg
  • Downloads
    PDF
    SDV-CTRX Manual
SKUSDV-CTRX
£0.00
£1,411.92
Reward points:0

This item is currently out of stock. We’ll notify you when it’s back in stock if you enter your email address in the box below..

Recommend to a friend