CYP

PUV-2010RX - 100m HDBaseT™ 2.0 Slimline Receiver (4K, HDCP2.2, PoH, LAN, OAR, USB)

PUV-2010RX 100m HDBaseT™ 2.0 Slimline Receiver (4K, HDCP2.2, PoH, LAN, OAR, USB)
Hover over the image to zoom

CYP

PUV-2010RX - 100m HDBaseT™ 2.0 Slimline Receiver (4K, HDCP2.2, PoH, LAN, OAR, USB)

Close reviews

Leave a review

The PU-2010RX Slimline Receiver supports video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.

This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x USB ports, giving the PU-2010RX Receiver the ability to act like a USB hub.

All of these features are incorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation. 

  • Features
    • Supports full HDBaseT™ 2.0 specification signals can be received up to a maximum distance of 100m over CAT6a/7
    • HDCP 2.2, HDMI and DVI compatible
    • HDBaseT 5-Play™ convergence: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT) and control (Bi-Directional IR & RS-232 pass through)
    • Supported resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
    • Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
    • Optical audio return (OAR)
    • Supports optical sampling rate up to 48kHz
    • Audio return channel (ARC)
    • Dedicated channel for analogue stereo audio transmission from a compatible transmitter to receiver.
    • Receiver features 2 x USB 2.0 ports
    • Ultra slim chassis design for ease of installation
  • Specification
    Inputs 1x RJ45 [1x HDBaseT 2.0 HDMI & Propriety Data]
    1x Toslink [1x Optical 2 Channel LPCM]
    1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
    Outputs 1x HDMI [1x HDMI Uncompressed AV and Data]
    2x USB Type A [2x USB Propriety Data]
    1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
    1x Phoenix (3 pin) [1x Stereo (L/R) Audio Output]
    1x Phoenix (3 pin) [1x RS-232]
    POE PSU: PoH
    Dimensions 270mm [W] x 80mm [D] x 20mm [H] 
    Net Weight 0.34kg
    Gross Weight 0.45kg
  • Downloads
    PDF
    PUV-2010TXRX Manual
SKUPUV-2010RX
£0.00
£650.88
Reward points:0

This item is currently out of stock. We’ll notify you when it’s back in stock if you enter your email address in the box below..

Recommend to a friend