NG-M4500-48XF8C - 48x10G/25G SFP28 and 8x100G QSFP28 Managed Switch

NG-M4500-48XF8C 48x10G/25G SFP28 and 8x100G QSFP28 Managed Switch
Hover over the image to zoom


NG-M4500-48XF8C - 48x10G/25G SFP28 and 8x100G QSFP28 Managed Switch

Close reviews

Leave a review

These switches combine the configurability of a matrix switcher with the power and scalability of Ethernet to support hundreds of AV over IP endpoints. M4300 and M4500 switches offer IGMP Plus and greatly simplify system architectures at a dramatically lower price point

  • Features


    Pre-configured for out-of-the-box use
    NETGEAR IGMP Plus™ enables instant multicast functionality for most AV over IP installations

    Cost effective aggregation
    Cost effective 100G aggregation and 10G access layer for AV deployments and redundant spine & leaf topologies

    Simplified system architecture
    Optimized for "Spine and Leaf" redundant AV installations, with or without MLAG between spine switches

    High capacity for AV over IP streams
    Up to 320 TX / 320 RX (10 Gigabit) nodes all line rate with each other in a redundant spine and leaf architecture

    VLAN configuration flexibility
    IGMP Plus is default on VLAN 1 out of the box and can be configured on another VLAN for automatic IGMP across switches on that VLAN

    Power and fan redundancy
    2 power supply units (APS750W) and 6 redundant fan trays (AFT402) pre-installed for 1+1 power and 4+2 fan redundancy


    Secure operation
    Advanced IPv4/IPv6 security including malicious code detection, DHCP Snooping, IP Source Guard, and Control Plane Policing (CoPP)

    Fault tolerance
    Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any Ethernet channeling

    Robust link aggregation
    Up to 64 Link Aggregation Groups (LAG, Port-Channel, LACP) with 32 ports per LAG and Multi-chassis Link Aggregation (MLAG)

    Comprehensive routing
    IPv4/IPv6 static and dynamic routing including IP Multinetting/CIDR, PBR, VRRPv2, OSPFv3, PIM-SM6, BGP4, VRF-Lite

    Security & Prioritization
    Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP) security and prioritization

    Multicast routing
    High performance IPv4/IPv6 multicast routing with PIM-SM and PIM-SM6 associated with unicast static routes, or other L3 protocol


    Advanced Layer 3 features
    Includes IP Multinetting/CIDR, Static, PBR, VRRPv2, OSPFv3, PIM-SM, VxLAN, BGP4, VRF-Lite

    Link Dependency
    Ability to enable or disable ports based on the link state of different ports for complete link dependency

    Configuration update simplicity
    on-Disruptive Configuration for applying a new configuration file without disrupting the operation of unchanged features

    Extensive management capabilities
    Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation

    OOB and CLI
    Service port for out-of-band 1 Gigabit Ethernet management (OOB) with industry standard command line interface (CLI) only

    Local management console
    Standard RS232 straight-through RJ45 for local management console (USB 2.0 to RS232 converter with PL203 chipset is advised)

    Built-In Redundancy
    Two redundant, modular power supplies and six hot-swappable fan trays pre-installed for peace of mind

    Industry-Standard Management
    Stay on top of operations with: CLI, local GUI, SNMP, sFlow, RSPAN, single pane of glass NMS300

    Secure Your Data
    Defend with Access Control, DiffServ QoS policies, LACP Link Aggregation, Private VLANs, Denial of service protection

    Dependable Operations
    Enjoy high availability across virtual servers through load balancing and nonstop forwarding failover.

  • Specification
    Model Description
    M4500 Managed Switch with 48x10G/25G SFP28 and 8x100G QSFP28 ports
    Ordering Number

    68.0dB @ 25°C (77°F) - the noise is reduced when the two PSUs connect to a power source

    Power Consumption (Max)
    394 Watts
    25G SFP28 Ports
    48 SFP28 ports (1x10G default mode, other modes can be 1x25G and 1x10G)
    100G QSFP28 Ports
    8 QSFP28 ports (1x100G default mode, other modes can be 1x50G, 1x40G)
    PSU and Fans
    2 modular Power Supply Units and 6 modular Fan Trays come pre-installed
    CLI only (local console, telnet port 1223 and SSH port 1234)
    Management Ports
    1G Ethernet service port for out-of-band management (OOB, RJ45). RS232 straight-through serial RJ45 for local management console
    Form Factor
    Full width 1U (508mm depth) with two mounting ears (front) and rail kits (back)
    Dimensions (WxDxH)
    440 x 508 x 43.2 mm
  • Downloads
    NG-M4500-48XF8C M4500_DataSheet.pdf

    NG-M4500-48XF8C M4500-Brochure.pdf
    NG-M4500-48XF8C M4500-ProductBrief.pdf
Reward points:0

This item is currently out of stock. We’ll notify you when it’s back in stock if you enter your email address in the box below..

Recommend to a friend