IP-A750RX - Audio only receiver for IP-7000 system
IP-A750RX - Audio only receiver for IP-7000 system
The IP-A750RX (& TX) takes advantage of Audio over IP's flexibility for all installation environments, ideal for audio-only zones within a larger AV over IP system. These products feature Analogue (Line out) and Digital output (S/PDIF and TOSLINK®) for added flexibility and, with the use of our intuitive IP-CS7 controller, allow the user to easily extend the connection between an audio source and an audio playback device via a 1Gb Local Area Network.
The advantage of Audio over IP is that it can flexibly route the audio and use cost effective CAT cable. This greatly reduces the cost of wiring and improves the user experience.
These Audio-over-IP products fully integrate into CYP's full 1Gb AV over IP system.
- Features
- Extend analog and digital audio over an IP network with 100m (330ft) of CAT 5/6 cable between TX/RX and network switch
- Compatible with IP-CS7 Controller to allow creation of video matrix switch using multiple Video-Over-IP Extender products. In order to achieve this, require commands to integrate with IP-CS7 hardware controller
- Features a analogue stereo, optical digital (toslink) output
- Features physical multi-use volume control knob
- LED confirmation of Power, Link and input status
- Field updatable firmware
- Specification
Inputs 1x RJ45 [1x Digital Audio Propriety Data]
1x Phoenix (3 pin) [1x RS-232]Outputs 1x Toslink [1x 2 Channel LPCM]
1x Phoenix (3 pin) [1x Analogue Stereo (L/R) Audio Output]POE PSU: PoE PSU: 5V/3A Dimensions 128mm [W] x 108mm [D] x 25mm [H] Net Weight 371g Gross Weight 1071g - Downloads
IP-A750RX Manual IP-A750RX Datasheet
Recommend to a friend