Global Cache Range - Lektropacks - The UK's Home For AV Accessories

Global Cache Range

GC-100 - Global Caché - GC-100 Network Adapter, IP-Enable Any Device

The GC-100 Network Adapter connects a TCP/IP network to infrared (IR), serial and relay communications-including sensor inputs-that can work, interrupt, or be polled by another network device. An embedded web server allows easy configuration from any browser. Control IR, Serial, Contact Closure Devices over a Network.

GC-BL2 - Global Cache IR Blaster

The GC-BL2 is designed for use with the Global Caché GC-100 Network Adapters to transmit IR signals across a room up to 40 feet. No power supply or connecting block is required for use.

With an IR modulation frequency range of 30 – 500 kHz, and transmitting up to 40 feet, the GC-BL2 is the obvious solution to any IR signal strength problem.

The GC-BL2 employs a standard 3.5mm stereo plug and 6ft cable for easy connection and installation for use with the GC-100 Network Adapter.

GC-CES - Global Cache 3.5mm Stereo Extension Cable (available in 6,12 & 25 foot)

A variety of 3.5mm stereo extension cables, to reach longer runs to a desired location in an installation.

GC-CEV - Global Cache RCA Extension Cable (available in 6 & 15 foot)

A variety of shielded RCA video extension cables, to reach longer runs to a desired location in an installation.

GC-CGX - Global Cache Xantech to GC-100 Cable

The GC-CGX is used to connect a Global Cache IR output (GC-100 or iTach) to a Xantech IR input. Global Cache IR outputs are converted to meet the IR input requirements for a Xantech IR distribution environment. IR signals from 30KHz to 72KHz can now be sent through an existing Xantech IR installation directly from one of our units. The GC-CGX is optically isolated to ensure circuit isolation and protection.

GC-CXG - Global Caché - IR Cable Xantech to GC-IRE

Converts Xantech and Xantech compatible IR emitter output voltages to the proper levels required by the Global Caché GC-IRE IR Extender.

GC-FL2E1B - Global Cache Flex IR Dual Emitter and blaster Cable

The Global Cache FL2E1B is an all in one cable for the iTach Flex devices. It contains two infrared emitters and one infrared blaster all in one useful cable.

Simply plug the FL2E1B into your Flex device then connect to the equipment you want to control.

** Please note that the FL2E1B is for the Global Cache iTach Flex devices only, it is not a generic infrared device and will not work with other infrared devices. **

GC-FL3EC - Global Cache Three Emitter Cable

The Global Cache FL3EC Three Emitter Cable is suitable for use with the iTach Flex devices. It provides three independent infrared emitter outputs to your equipment.

Simply plug into your Flex, connect to your devices and set up in your app and you can control your devices simply from a single cable input.

** Please note that this device only works with the iTach Flex, it is not a standard 1 > 3 infrared splitter so will not work with other infrared devices. **

GC-FLBC - Global Cache Flex Link Blaster Cable

The iTach Flex Link Blaster Cable connects to the Global Port on an iTach Flex IP or Wi-Fi to provide line of sight infrared blasts to all devices in a 20 - 30 foot range. The Flex Link Blaster Cable can also be used in conjunction with the Flex Link Tri-Port cable to support the addition of up to 2 emitters to the same iTach Flex unit.

GC-FLEXIP - Global Cache iTach Flex IP (wired)

The iTach Flex provides powerful, inexpensive, and simple connectivity to almost any electrical device so it can be controlled and automated using an app on a smartphone, tablet, or any other user interface. Historically, automation and control products have been complex and expensive, used almost exclusively by the very wealthy. That changes with the easy availability of control apps on the iTunes Store and Android Marketplace, and the ability to connect almost any device in the home to a WiFi or wired network using the iTach Flex.

The extremely small footprint, slightly larger than a pack of gum, is ideally suited for transparent coupling and seamless integration to any device in homes or businesses. The Flex’s

unique hardware form, with a WiFi or network connection to a 3.5mm jack that supports almost any type of protocol translation cable, offers the ability to bridge products and systems in a way never available before.

Entertainment systems are the most common household devices to be controlled, and most of those devices respond to IR codes, the infrared commands sent by your typical remote control. Integrated tightly with the iTach Flex, is a no charge, cloud-based service instantly providing the required IR codes for the equipment being controlled. The ease-of-use and versatility of the cloud-based system ensures compatibility and expandability of any system. The Flex also offers built-in IR learning.

Once an entertainment system is under control, the next step may be the shades, or the lighting, the sprinklers, or the Jacuzzi. The iTach Flex, with its scalable and simple to use design, will connect them all at the site of the equipment, with no need for a complex rack mounted system. The iTach Flex introduces a new concept of distributed automation and control, with smart end-points that enhance and connect standalone devices, allowing for them to be accessed and controlled by apps on smartphones, tablets, you name it.

GC-FLEXIP-P - Global Cache iTach Flex IP with PoE

The new wired Global Cache iTach Flex IP POE is a versatile and flexible home automation solution for controlling infrared or serial devices over your network with your smart phone or tablet. This is the new model which supports Power Over Ethernet for easy and flexible installation without requiring local power supplies.

The Global Cache iTach Flex POE has various leads available including infrared emitter, infrared blaster, tri port cable and serial RS232 cable allowing for a combination of connections. You can use a Global Cache iTach Flex IP POE with an infrared tri port cable, 2 x infrared emitters and 1 x infrared blaster to control your home cinema system or connect a serial RS232 cable to take control of your lighting system. The Global Cache iTach Flex IP POE wired provides powerful, inexpensive, and simple connectivity to almost any infrared or RS232 device so it can be controlled and automated using an iPhone or Android app on a smartphone, tablet, or any other user interface.

The Global Cache iTach Flex IP POE has an extremely small footprint, slightly larger than a pack of chewing gum makes it ideally suited for transparent coupling and seamless integration to any device in homes or businesses. Great for hiding on the projector in your home cinema. The Global Cache iTach Flex’s unique hardware form, with a WiFi or network connection to a 3.5mm jack that supports almost any type of protocol translation cable, offers the ability to bridge products and systems in a way never available before. The Flex also offers built-in IR learning.

GC-FLEXWF - Global Cache iTach Flex WiFi

The extremely small footprint, slightly larger than a pack of gum, is ideally suited for transparent coupling and seamless integration to any device in homes or businesses. The Flex’s

GC-FLIREM - Global Cache Flex IR Emitter Cable

Used to connect the Global Cache iTach Flex devices to infra red devices such as TV's, BluRay Players, lighting control and much, much more! This product can be used with the Global Cache Tri-Port Adapter in order to connect three independent infra red outputs.

GC-FLRS232 - Global Cache Flex Link Serial Cable (RS232)

Connects the iTach Flex to serial RS232 devices such as lighting control, home automation, blind control and much more.

GC-FLRSC - Global Cache Flex Link Relay and Sensor Cable

The Global Cache Itach Flex Link Relay & Sensor cable is an input/output cable for use with the iTach Flex.

It provides relay outputs and sensor inputs which allow control and monitoring of a variety of devices.

External devices are connected via push-release terminal blocks. The enclosure can be mounted directly on a DIN rail, allowing for simple integration with external relays.

GC-FLTRI - Global Cache Flex Link Tri-Port Cable

The iTach Flex Link Tri-Port Cable enables up to 3x iTach Emitters or 1x iTach Flex Link Blaster and 2x iTach Emitters to connect to the Global Port on an iTach Flex IP or WiFi unit.

This cable is not compatible with the original iTach series. The iTach Flex is required.

GC-IP2 - Global Caché iTach - IP

The Global Caché iTach is a family of products designed to connect almost any electrical device to a network in a matter of minutes. Product GC-CO-1010/IR provides TCP/IP connectivity to IR devices. Product GC-CO-1010/S provides TCP/IP connectivity to serial devices, and product GC-CO-1010/CC provides TCP/IP connectivity to Closed Contact devices.

GC-IP2-P - Global Caché iTach - IP with Power over Ethernet

The Global Caché iTach is a family of products designed to connect almost any electrical device to a network in a matter of minutes. Product GC-CO-1015/IR provides TCP/IP connectivity to IR devices. Product GC-CO-1015/S provides TCP/IP connectivity to serial devices, and product GC-CO-1015/CC provides TCP/IP connectivity to Closed Contact devices - all with power over ethernet.

GC-IRE - Global Caché - GC-IRE IR Extender

The GC-IRE IR Extender is a new concept in automated controls that allows IR devices, such as remote controllers, to act as digital input devices in a networked environment.

GC-IRL - Global Caché - GC-IRE IR Learner

Plugs into the RS232 port of any PC and is used to learn the full spectrum, 30KHz to 500KHz, of IR codes that control infrared driven audio/video equipment. When used in conjunction with the free utility software, learned codes are displayed, converted into other formats, and automatically copied into the Windows clipboard for easy IR database and spreadsheet creation. The stored codes can be used to control IR devices from any computer over the network.

GC-RG1 - Global Caché - GC-RG1 General IR Receiver

The GC-RG1 is an IR receiver used to capture IR frequencies from 30 KHz to 80 KHz. The GC-RG1 plugs directly in the GC-IRE (GC-CO-1021) to capture and digitize IR signals.

GC-SC1 - Global Caché - GC-SC1 Contact Closure Sensor

The Global Caché GC-SC1 is a contact closure sensor. Its circuitry provides a rapid response to contact closure (4mS typ) with a slow response to contact opens (75mS typ).

GC-SP1 - Global Caché - GC-SP1 AC/DC Voltage Sensor

The GC-SP1 is a voltage detection sensor for DC or AC voltages within an operating range of ±24 volts. The GC-SP1 provides an ON indication when a positive or negative voltage is applied as an input. Wiring polarity is not a concern since voltage detection is symmetric, as well as, optically isolated to avoid noise and ground loops often found in installations powered by multiply sources.

GC-SV1 - Global Caché - GC-SV1 Video Out Sensor

The GC-SV1 is a composite video detection sensor, making it ideal for determining the power state of VCRs and DVDs. It provides an ON indication during the presence of a composite video signal of the type found on the back of VCRs and DVDs. The GC-SV1 can connect directly to either "Component Video Out" (the green or Y RCA plug) or "Composite/Line Out" (the yellow or Video RCA plug) found on the back of most video equipment.

GC-WF2 - Global Caché iTach - WiFi

The Global Caché iTach is a family of products designed to connect almost any electrical device to a network in a matter of minutes. Product GC-CO-1005/IR provides WiFi connectivity to IR devices. Product GC-CO-1005/S provides WiFi connectivity to serial devices, and product GC-CO-1005/CC provides WiFi connectivity to Closed Contact devices.

Return to top show prices Inc. VAT