The PUV-662PL-4K22
HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to
4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 6 HDMI sources
to 6 HDBaseT Lite outputs and 2 independent HDMI2.0 outputs. The HDBaseT
outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the
independent HDMI outputs support cable lengths of up to 10m. This matrix
supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD,
Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video
content.
The PUV-662PL-4K22
matrix incorporates an independent audio matrix with 8 audio outputs and 4
audio inputs. These outputs and inputs can be used for de-embedding HDMI
audio to feed the audio outputs and embedding this audio to the HDBaseT and
HDMI outputs. In addition, volume, mute, treble, bass and audio
lip-sync correction control are available on all direct audio outputs.
Optical Audio Return (OAR) Technology allows the optical input on the PUV-1230PL-RX
receiver to be routed back to the audio matrix.
The matrix has a built-in pattern generator which can be used to
verify the video signal on any of its 8 output ports. The
Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual
selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers
for all the major control systems. This unit also supports RS232 pass-through
to the receivers.
The PUV-662PL-4K22 is designed
to be used with PUV-1230PL-RX or PUV-1210PL-RX receivers that can utilise the
PoH capabilities of the matrix..