Free Motion Cantilever Mount for 37 to 65 inch screens
VESA 200, 300, 400, 600x400, 800x400Universal up to 900 x 500mm
75kgs max weight loading
120 degree swivel left-right
70mm depth
475mm reach
20 degree tilt
Universal lightweight projector mount designed specifically for our range of Optoma projectors, but have universal fittings to allow most projectors to be ceiling mounted.
Flexson SONOS Boost Wall Mount Bracket. Flexson's bespoke bracket for the SONOS Boost allows you to discreetly
wall mount the connectivity device - for example, hiding it away in a
cupboard.
The Flexson Boost wall bracket is precision engineered in England to
perfectly match the size, style and colour of the SONOS Boost.
Like all Flexson SONOS products, the Boost wall-mount bracket allows
for neat cable routing, easy fitting and flexible placement. It can be
oriented at various angles to allow for cable connections at the most
convenient position.
Flexson. Designed by SONOS users for SONOS users
Easy to use, sleek and modern rack to supports Connect and Connect Amp.
Flexson floorstands put your SONOS PLAY:1 speakers at the ideal
listening height. Whether you're streaming music to a single speaker, or
using a pair of PLAY:1 speakers in stereo, or in a 5.1 PLAYBAR set-up
for your movies, TV and more, your system will look - and sound - great.
Flexson's bespoke floorstand is precision engineered in England to
perfectly match the size, style and colour of the SONOS PLAY:1 speaker.
The Flexson floorstand for PLAY:1 is a sturdy, metal design - with a
stable base that can slip under sofas or chairs if needed. This new
edition has enhanced cable routing, with a cable channel at the rear of
the upright column making it easier to neatly hide away the speaker's
power cable.
Like all Flexson accessories for SONOS, the floorstand is easy to
assemble and use. It comes with your choice of spikes (for carpeted
floors) or gel pads (for hard floors).[Please note, the floorstands are
available in both single and pairs]
Flexson floorstands put your SONOS PLAY:1 speakers at the ideal
listening height. Whether you're streaming music to a single speaker, or
using a pair of PLAY:1 speakers in stereo, or in a 5.1 PLAYBAR set-up
for your movies, TV and more, your system will look - and sound - great.
Flexson's bespoke floorstand is precision engineered in England to
perfectly match the size, style and colour of the SONOS PLAY:1 speaker.
The Flexson floorstand for PLAY:1 is a sturdy, metal design - with a
stable base that can slip under sofas or chairs if needed. This new
edition has enhanced cable routing, with a cable channel at the rear of
the upright column making it easier to neatly hide away the speaker's
power cable.
Like all Flexson accessories for SONOS, the floorstand is easy to
assemble and use. It comes with your choice of spikes (for carpeted
floors) or gel pads (for hard floors).[Please note, the floorstands are
available in both single and pairs]
Medium Articulating VESA Mount for 21 to 37 inch screens
VESA 50, 75, 100, 200x100, 200, 400x30030kgs max weight loading
270 degree swing left-right
60mm depth
425mm reach
20 degree tilt
Classic Desk Top Pedestal Stand for 32 to 48 inch screens
VESA 200, 300, 400, 600x400Universal up to 600 x 400mm
50kgs max
60 degree swivel left-right
Can be padlocked
Rigid steel structure
Black glass base
Ultra Slim Universal Wall Mount for 32 to 55 inch screens
VESA 200, 300, 400, 600x400Universal up to 600 x 400mm
75kgs max weight loading
Bolts together for safety and security
Can be padlocked for extra visible security
32mm depth
Super Slim Articulating Universal Mount for 32 to 55 inch screens.
VESA 200, 300, 400, 600x400
Universal up to 600 x 400mm
35kgs max weight loading
Bolts together for safety and security
Can be padlocked for extra visible security
180 degree swing left-right
34mm depth
688mm reach
VESA 200, 300, 400, 600x400Universal up to 800 x 570mm
75kgs max
60 degree swivel left-right
Can be padlocked
Rigid steel structure
Black glass base
Large Flush Fitting Universal Wall Mount for 32 to 65 inch screens.
VESA 200, 300, 400, 600x400Universal up to 600 x 400mm
75kgs max weight loading
Bolts together for safety and security
Can be padlocked for extra visible security
32mm depth
Large Universal Wall Mount with Tilt for 32 to 65 inch screens
VESA 200, 300, 400, 600x400Universal up to 600 x 400mm
75kgs max weight loading
Bolts together for safety and security
Can be padlocked for extra visible security
60mm depth
+/- 7.5 degree tilt
XL Flush Universal Wall Mount for 55 to 85 inch screens
VESA 200, 300, 400, 600x400, 800x400Universal up to 1050 x 650mm
135kgs max weight loading
Bolts together for safety and security
Can be padlocked
45mm depth
XL Universal Tilting Wall Mount for 55 to 85 inch screens
VESA 200, 300, 400, 600x400, 800x400Universal up to 1050 x 650mm
135kgs max weight loading
Bolts together for safety and security
Can be padlocked for extra visible security
15 degree tilt
56mm depth
The original ‘tilt and swivel’ mounts, designed for small to medium loudspeakers weighing up to 10kg (22lbs). Moulded from glass-filled nylon for low resonance and durability, mounts speaker only 75mm (3”) from wall. Simple 'hook-on' installation with all mounting hardware included (supplied in pairs).
Easy adjustment of arm depth allows speaker to be positioned for optimum esoteric performance. Ideal for centre channel speakers, DVD players and other AV equipment. Designed for loudspeakers up to 15kg (33lbs). Simple installation with all mounting hardware included.
Designed for home cinema speakers up to 5kg (11lbs), suitable for single point, dual point and keyhole fixings.
Speakers are adjustable; up / down / sideways, using thumbwheel for easy adjustment of tilt and swivel.
No visible wall fixing screws, simple ‘hook-on’ installation with all mounting hardware included. Includes adaptors for keyhole, single point and dual point fixings. Suitable for speakers using M5, M6, UNC 1/4” and wood screws
Compatible with SONOS® Play:1 and Play:3 speakers (in portrait mode)
Supplied in pairs
Patented design
Designed for home cinema speaker mounts up to 5kg (11lbs). Can be ceiling or wall mounted, cover plate included for smart installation. Features +/-90° tilt adjustment and full 360° swivel.
Simple installation with all mounting hardware included, includes adaptors for single point, dual point and keyhole fixings. Suitable for speakers using M5, M6 and UNC 1/4” screws.
Supplied individually.
Twin columned floor stands for loudspeakers up to 50kg (110lbs), solid construction using heavy gauge steel for enhanced stability. Suitable for all types of floors including wood and carpet with supplied protection discs. Top and bottom isolation spikes provided, foam pads included as an alternative to isolating support spikes.
Sound isolating loudspeaker floor stands with fillable columns for superior dampening. Simple assembly and easy speaker mounting. Supplied in pairs.
Twin columned, Sound isolating floor stands for loudspeakers up to 35kg (77lbs). Solid construction using heavy gauge steel for enhanced stability. Fillable columns for superior dampening. Suitable for all types of floors including wood and carpet with supplied protection discs. Top and bottom isolation spikes provided, foam pads included as an alternative to isolating support spikes. Simple assembly and easy speaker mounting.
Supplied in pairs.
Twin columned, sound isolating floor stands for loudspeakers up to 15kg (33lbs). Solid construction using heavy gauge steel for enhanced stability. Fillable columns for superior dampening. Suitable for all types of floors including wood and carpet with supplied protection discs. Top and bottom isolation spikes provided, foam pads included as an alternative to isolating support spikes.
Simple assembly and easy speaker mounting. Compatible with SONOS® Play:1 speakers. Supplied in pairs.
Designed for screens up to 42” (107cm) / 25kg (55lbs). Simple ‘hook-on’ installation with all mounting hardware included, also includes single arm and optional mini arm. CLIPLOGIC™ cable management included.
Fits screens with VESA mounting patterns: 75mm x 75mm, 100mm x 100mm, 200mm x 100mm and 200mm x 200mm. Easy tilt adjustment +/-40°. Features two swivel points: 180° at wall and 240° at interface. Security locking screws and Allen key provided for secure installation. Features ‘OWLS’™ On Wall Levelling System.
Designed for screens up to 42” (107cm) / 25kg (55lbs). Simple ‘hook-on’ installation with all mounting hardware included, also includes single arm and optional mini arm. CLIPLOGIC™ cable management included.
Fits screens with VESA mounting patterns: 75mm x 75mm, 100mm x 100mm, 200mm x 100mm and 200mm x 200mm. Easy tilt adjustment +/-40°. Features two swivel points: 180° at wall and 240° at interface. Security locking screws and Allen key provided for secure installation. Features ‘OWLS’™ On Wall Levelling System.
Designed for loudspeakers up to 25kg (55lbs), suitable for most speakers including curved front types. Features +/- 7° tilt and 360° swivel with simple adjustment. Adjustable clamp size: 135mm (5.3”) - 280mm (11”).
Simple installation with all mounting hardware included. Suitable for concrete, brick or wooden stud walls, no visible wall fixing screws.
Supplied in pairs
Designed specifically for wall mounting 4th Generation Apple TV® media players, the BT7880 features an open framework design which provides sufficient airflow to the device while keeping it secure; preventing unauthorised removal through the use of locking bars and "Pin Torx" security screws. The BT7880 features a large tilt and swivel range and can also be mounted onto poles and System X extrusions for more mounting flexibility. The mount is quick and easy to install and all mounting hardware is included.
Specifically designed to mount 4th Generation Apple TV's, features +/-90° tilt and 75° swivel. Can be used to mount the device to walls, poles or System X™ extrusions for greater mounting flexibility. Open framework design provides a greater airflow, keeping the device cool. Locking bar and "Pin Torx" security screws keep the Apple TV secure, helping prevent unauthorised removal of the device.
Quick and easy installation, all mounting hardware included.
Designed flat screens up to 55” (139cm) / 50kg (110lbs), ultra-slim design mounts screen only 14mm (0.6”) from wall.
Contemporary mounting solution, ideal for the latest generation of LED and 3D TVs, features unique ‘Torsion Lock’™ security and ‘OWLS’™ On Wall Levelling System. Simple ‘hook-on’ installation with all mounting hardware included, suitable for concrete / brick or up to 16” stud walls. Security locking screws, Allen key and locking bar provided for secure installation. Universal screen fixing kit supplied, including M4, M5, M6, M8 screws and spacers.
Fits screens with mounting patterns up to 440mm (17.4”) x 400mm (15.7”) including VESA®: 75 x 75mm, 100 x 100mm, 200 x 100mm, 200 x 200mm, 200 x 300mm, 300 x 200mm, 300 x 300mm, 400 x 200mm, 400 x 300mm and 400 x 400mm.
Supplied in brown box packaging ideal for professional installers.
Designed for flat screens up to 80” (203cm) / 70kg (154lbs), ultra-slim design mounts screen only 14mm (0.6”) from wall.
Contemporary mounting solution, ideal for the latest generation of LED and 3D TVs, features unique ‘Torsion Lock’™ security and ‘OWLS’™ On Wall Levelling System. imple ‘hook-on’ installation with all mounting hardware included, suitable for concrete / brick or up to 32” stud walls. Security locking screws, Allen key and locking bar provided for secure installation. Universal screen fixing kit supplied, including M4, M5, M6, M8 screws and spacers.
Fits screens with mounting patterns up to H: 840mm (33.2") x V: 500mm (19.7") including VESA®: 75 x 75mm, 100 x 100mm, 200 x 100mm, 200 x 200mm, 300 x 200mm, 300 x 300mm, 400 x 200mm, 400 x 300mm, 400 x 400mm, 600 x 400mm, 800 x 400mm and 800 x 500mm
Supplied in brown box packaging ideal for professional installers.
Designed for screens up to 65” (165cm) / 36kg (80lbs). Universal screen mounting interface fits screens with VESA and non-VESA mounting patterns from up to 600 x 400mm.
Full motion mount - ideal for corner mounting. Easy tilt adjustment +/-15° (no tools required), features three swivel points: 180° at wall, 360° at central pivot and 180° at interface.
Ultra-slim design mounts screen only 37mm (1.5") from wall when folded flat, arm extends up to 560mm (22").
Simple ‘hook-on’ installation with all mounting hardware included, suitable for concrete / brick or stud walls up 16 inches. Attractive coverplates included to hide fixings, integrated cable management and spirit level bubble.
Designed to mount medium to large sized screens, this ultra-slim twin cantilever arm wall mount features full motion technology with a tilting interface and three swivel points, allowing quick and easy repositioning of screens as required - whether folded flat to the wall at a depth of just 40mm or at maximum extension. Cover plates to hide fixings and integrated cable management help make this a neat and tidy mounting solution which is ideal for commercial applications as well as home installations.
Full motion technology for easy screen positioning - ideal for corner mounting, twin cantilever arm for extended reach. Easy tool-less tilt mechanism, lateral adjustment of screen once mounted. Interface arms can be padlocked to help prevent unauthorised removal of screen (padlock not included).
Simple 'hook-on' installation. Includes spirit level for easy wall plate levelling during installation, all mounting hardware included.
Designed to make video wall installations as quick and simple as possible, this modular video wall mount can be used to create unlimited video wall configurations in both landscape and portrait format. The BT8310 features a pop-in, pop-out system which enables quick and easy access to the rear of mounted screens for servicing and maintenance and 8 point micro-adjustment, making accurate screen alignment quick and easy.
Modular mount for unlimited wall display configurations, suitable for landscape or portrait screen mounting. Push to open / push to close system provides quick and easy service access. Tool-less micro-adjustments at 8 points for seamless display alignment. Suitable for both wall or pole mounting, integrated cable management.
Screen specific wall plate spacers (available separately) dramatically shorten install times by eliminating guesswork and on-site calculations. Perfect solution for mounting screens into a recessed wall.
Safety screws help prevent unauthorised removal of screens. Includes Interface Adaptor Arms as standard (pictured below) for use with screens with VESA 600 x 400 fixings. All mounting hardware included.
Locking kit (BT8310-LK) to prevent accidental pop-out of mount is also available (separately).
Designed for flat screens up to 80” (203cm) / 70kg (154lbs), contemporary mounting solution, ideal for the latest generation of LED and 3D TVs. Fits screens with mounting patterns up to H: 840mm (33.2") x V: 500mm (19.7"). Ultra-slim design mounts screen only 14mm (0.6”) from wall. Features unique ‘Torsion Lock’™ security and ‘OWLS’™ On Wall Levelling System. Suitable for concrete / brick or up to 32” stud walls.
Simple ‘hook-on’ installation with all mounting hardware included. Universal screen fixing kit supplied, including M4, M5, M6, M8 screws and spacers. Security locking screws, Allen key and locking bar provided for secure installation.
Supplied in brown box packaging ideal for professional installers.
Designed to mount large to extra-large sized screens, the BT8432 is a flat screen wall mount that features a unique ‘Torsion-Tilt’ mechanism which allows easy tilt adjustment of the screen up to +/-15°. Also suitable for pole mounting using B-Tech’s Accessory Collars, the BT8432 features levelling screws to adjust the screen level post installation as well as locking screws which help prevent unauthorised removal of the screen.
Arms feature levelling screws to adjust the screen height. Simple ‘hook-on’ installation. All mounting hardware included.
Designed to mount the largest screens on the market, the heavy duty BT9903 is capable of supporting weights of 200kg. It is ideal for heavy touchscreens over 65" and the universal interface accommodates for mounting patterns up to 1100mm x 730mm. The BT9903 comes available with adjustment screws which allow the screen to be levelled once mounted.
Comptible with B-Tech's collar and pole system for pole mounting heavy duty screens. Heavy duty 4mm steel capable of supporting the heaviest screens. Low profile design mounts screen only 30mm from wall. Suitable for concrete / brick or up to 32” stud walls. Simple ‘hook-on’ installation with all mounting hardware included.
Designed for screens up to 42” (107cm) / 40kg (88lbs). Suitable for VESA and non-VESA mounting patterns. Mounts screen only 20mm (0.8”) from wall. Suitable for concrete, brick or stud walls up to 10”. Post-installation screen alignment. Includes locking bar for secure installation. Simple hook-on installation with all mounting hardware included.
Designed for screens up to 42” (107cm) / 40kg (88lbs). Suitable for VESA and non-VESA mounting patterns. Mounts screen only 44mm (1.73”) from wall. Five fixed tilt positions up to +15°. Suitable for concrete, brick or stud walls up to 10”. Post-installation screen alignment. Includes locking bar for secure installation. Simple 'hook-on' installation with all mounting hardware included.
Designed for screens up to 55” (140cm) / 50kg (110lbs). Suitable for VESA and Non-VESA mounting patterns. Mounts screen only 44mm (1.73”) from wall. Five fixed tilt positions up to 15°. Suitable for concrete, brick or stud walls up to 16”. Post-installation screen alignment. Includes locking bar for secure installation. Simple 'hook-on' installation with all mounting hardware included.
Floor stands designed for small home cinema / satellite speakers. Quick and simple 3 step installation. Cable management for a clean and tidy appearance. Supplied with a dual point adaptor - alternative platform also included. All necessary fixings and mounting hardware included. Adjustable height for optimal speaker positioning: 685mm (27”) - 1060mm (41.7”). Max weight of speakers 2kg (4lbs). Supplied in pairs.
Ideal solution for mounting a Soundbar Speaker to your Flat Screen TV. Mounts Soundbar above or below the screen. Universal mount suitable for most soundbars and flat screens. Use with or without a Flat Screen Wall Mount. Ideal for corner installations with an articulated mount. Low profile steel brackets. Max weight of Soundbar: 10kg (22lbs). Easy installation - All mounting hardware included
Compatible with SONOS® Playbar.
Flexson SONOS Connect Amp Wall Mount Bracket
Flexson's bespoke bracket for the SONOS Connect Amp allows you to
discreetly wall mount the SONOS device.
The Flexson Connect Amp wall bracket is precision engineered in England
to perfectly match the size, style and colour of the SONOS Connect Amp
Like all Flexson SONOS products, the Connect Amp wall-mount bracket
allows for neat cable routing, easy fitting and flexible placement. It
can be oriented to allow for cable connections at the most convenient
position, and is supplied with an optional cable cover that makes things
neater still.
Flexson. Designed by SONOS users for SONOS users
Flexson SONOS Connect Wall Mount Bracket
Flexson's bespoke bracket for the SONOS Connect allows you to discreetly
wall mount the connectivity device.
The Flexson Connect wall bracket is precision engineered in England to
perfectly match the size, style and colour of the SONOS Connect.
Like all Flexson SONOS products, the Connect wall-mount bracket allows
for neat cable routing, easy fitting and flexible placement. It can be
oriented to allow for cable connections at the most convenient position,
and is supplied with an optional cable cover that makes things neater
still.
Flexson. Designed by SONOS users for SONOS users
New and modern colour skin for SONOS Connect in Black Matt finish.
Tilt it, swivel it, hang it!
Flexson's bespoke bracket for the SONOS PLAY:1 allows you to hang your
speaker from the ceiling in the ideal place to sound - and look great.
This new, improved design gives you yet more flexibility and
functionality with clever cable routing to the ceiling.
The new Flexson ceiling mount has a unique tilting mechanism, as well as
the ability to swivel left or right, so you can perfectly angle your
sound. Able to tilt 15 degrees down, swivels 80 degrees (40 degrees
right & 40 degrees left). It's also ideal for bars, restaurants,
shops as well as your home.
The bracket also allows you to hang the PLAY:1 upside down - so you can
access it's on-speaker controls even when it's mounted on the ceiling!
The Flexson Ceiling mount for SONOS PLAY:1 is precision engineered to
perfectly match the size, style and colour of the SONOS speaker. It also
allows for neat cable routing, easy fitting and flexible placement.
Free up your surfaces and mount your music today!
[Please note, the Ceiling Mount is available in both single and pairs]
Tilt it, swivel it, hang it! Flexson's bespoke double bracket for the SONOS PLAY:1 allows you to hang two speakers from the ceiling in the ideal place to sound - and look great. This new, improved design gives you yet more flexibility and functionality with clever cable routing to the ceiling. The new Flexson ceiling mount has a unique tilting mechanism, as well as the ability to swivel left or right, so you can perfectly angle your sound. Able to tilt 15 degrees down, swivels 80 degrees (40 degrees right & 40 degrees left). It's also ideal for bars, restaurants, shops as well as your home. The bracket also allows you to hang the PLAY:1 upside down - so you can access it's on-speaker controls even when it's mounted on the ceiling! The Flexson Ceiling mount for SONOS PLAY:1 is precision engineered to perfectly match the size, style and colour of the SONOS speaker. It also allows for neat cable routing, easy fitting and flexible placement. Free up your surfaces and mount your music today! [Please note, the Ceiling Mount is available in both single and pairs]
Tilt it, swivel it, even hang it upside down!
Flexson?s bespoke bracket for the SONOS PLAY:1 allows you to wall mount
your speaker in the ideal place to sound - and look - great. This new,
improved design gives you yet more flexibility and functionality.
The new Flexson mount has a unique tilting mechanism, as well as the
ability to swivel left or right, so you can perfectly angle your sound.
The bracket also allows you to hang the PLAY:1 upside down ? so you can
access its on-speaker controls even when it?s mounted high up. You can
even mount your speaker on the ceiling!
The Flexson wall mount for SONOS PLAY:1 is precision engineered to
perfectly match the size, style and colour of the SONOS speaker. It also
allows for neat cable routing, easy fitting and flexible placement.
Free up your surfaces and mount your music today!
[Please note, the Wall Mounts are available in both single and pairs,
black or white ]
Tilt it, swivel it, even hang it upside down!
Flexson's bespoke bracket for the SONOS PLAY:1 allows you to wall mount
your speaker in the ideal place to sound - and look - great. This new,
improved design gives you yet more flexibility and functionality.
The new Flexson mount has a unique tilting mechanism, as well as the
ability to swivel left or right, so you can perfectly angle your sound.
The bracket also allows you to hang the PLAY:1 upside down ? so you can
access its on-speaker controls even when it's mounted high up. You can
even mount your speaker on the ceiling!
The Flexson wall mount for SONOS PLAY:1 is precision engineered to
perfectly match the size, style and colour of the SONOS speaker. It also
allows for neat cable routing, easy fitting and flexible placement.
Free up your surfaces and mount your music today!
[Please note, the Wall Mounts are available in both single and pairs ]
Flexson floorstands put your SONOS PLAY:3 speakers at the ideal
listening height. Whether you're streaming music to a single speaker, or
using a pair of PLAY:3 speakers in stereo, or in a 5.1 PLAYBAR set-up
for your movies, TV and more, your system will look - and sound - great.
Flexson's bespoke floorstand is precision engineered in England to
perfectly match the size, style and colour of the SONOS PLAY:3 speaker.
It allows you to use the PLAY:3 in either a horizontal or vertical
position.
The Flexson floorstand for PLAY:3 is a sturdy, metal design - with a
stable base that can slip under sofas or chairs if needed. This new
edition has enhanced cable routing, with a cable channel at the rear of
the upright column making it easier to neatly hide away the speaker's
power cable.
Like all Flexson accessories for SONOS, the floorstand is easy to
assemble and use. It comes with your choice of spikes (for carpeted
floors) or gel pads (for hard floors).
Tilt it, swivel it, rotate it - even hang it upside down!
Flexson's bespoke bracket for the SONOS PLAY:3 allows you to wall mount
your speaker in the ideal place to sound - and look - great. This new,
improved design gives you yet more flexibility and functionality.
The new Flexson mount has a unique tilting mechanism, as well as the
ability to swivel left or right, so you can perfectly angle your sound.
It also allows 180-degree rotation - making the most of the PLAY:3's
ability to be used in either horizontal or vertical mode.
The bracket also allows you to hang the PLAY:3 upside down - so you can
access its on-speaker controls even when it's mounted high up. You can
even mount your speaker on the ceiling!
The Flexson wall mount for SONOS PLAY:3 is precision engineered to
perfectly match the size, style and colour of the SONOS speaker. It also
allows for neat cable routing, easy fitting and flexible placement.
Free up your surfaces and mount your music today!
Designed to perfectly fit the second-generation SONOS PLAY:5, this new Flexson wall-mount bracket is as strong as it is discreet.
The Flexson Wall Mount for SONOS PLAY:5 securely holds the speaker in landscape position, from where it can be swivelled (up to 30 degrees left or right) and tilted (up to 20 degrees down), to angle your music to the perfect place.
Flexson Flat to Wall Mount for SONOS PLAYBAR + TV - This ultra-slim
bracket allows you to wall mount both your flatscreen TV and the SONOS
Playbar as a seamless unit. Only 12mm deep, the wall mount can be
adjusted to align the SONOS soundbar snuggly under the TV and, if
preferred, the screen can be positioned to align with the front of the
SONOS Playbar for optimum visual integration.
Flexson TV Stand for SONOS PLAYBAR
The SONOS Playbar is the perfect way to add quality Home Cinema to your
TV, but what if there isn't much space where your TV is located? Place
it in front and it could be unstable sitting over the TV's foot.
FLEXSON have the answer, a stylish steel stand. Sit your TV on top,
slide the Playbar underneath and you have a discreet practical solution.
Designed and made in the UK from 2mm steel for a strong rigid support
the FLEXSON TV Stand complements the styling and finish of the SONOS
Playbar.
Whats more, the Flexson TV Stand for Playbar essentially transforms the
SONOS soundbar into a soundbase for a flatscreen TV. An excellent
solution and supports screens with a weight of upto 50kg.
Playbar Wall Bracket is modern, stylish and unique model.
Flexson TV Mount Attachment for SONOS PLAYBAR is designed to easily fit
on to a full-motion (articulated) TV wall mount.
The Flexson Screen Mount securely holds your PLAYBAR in place while
allowing it to move with the screen. So, wherever you want to angle your
TV, the SONOS sound stays directly underneath it, for optimum
performance with music, movies and more.
The Flexson SONOS PLAYBAR Screen Mount is precision engineered in
England to perfectly match the size, style and colour of the SONOS
PLAYBAR
It is ideal for 40 inch screens, and will fit any VESA compatible
display up to 65 inch, using standard wall mounts (with two vertical
mounting arms).
[Please note: combined weight of Sonos PLAYBAR and Flexson mount is
9.5kgs, which must be added to the TV weight and still be within your
screen mount?s weight limit.]
Flexson. Designed by SONOS users for SONOS users.
Package contents
Speaker mount
Mount arms (x2)
Fixing kit.
Flexson SONOS SUB Wall Mount Bracket
Flexson's bespoke bracket for the SONOS SUB allows you to wall mount
your subwoofer in the ideal place to sound - and look - great.
The Flexson SUB wall bracket is precision engineered in England to
perfectly match the size, style and colour of the SONOS subwoofer.
Like all Flexson SONOS products, the SUB wall-mount bracket allows for
neat cable routing, easy fitting and flexible placement.
Flexson. Designed by SONOS users for SONOS users.
The brilliant SONOS SUB subwoofer only comes in black but Flexson's
ColourPlay skin can fix that! It neatly wraps the SONOS SUB in a
gorgeous white gloss finish to better suit your décor and be the perfect
partner to white SONOS speakers.
ColourPlay skins are made in Europe from durable vinyl, and precision
cut to fit every SONOS product. They're easy to apply: simply peel the
vinyl from the backing sheet, position on your SONOS SUB as shown on the
product packaging, and smooth down with the supplied applicator to fix
in place.
Want to change colour? ColourPlay skins peel off without leaving a
residue.
ColourPlay skins from Flexson are also available for SONOS PLAY:1,
PLAY:3 and PLAY:5 speakers in 5 bright and bold colours, giving you
options to either match your décor or offer 'pop' colour. There is also a
Black ColourPlay skin for the white SONOS CONNECT allowing you to
match it with your other components. White or black Flexson floorstands
and wall-mounts offer further flexibility.
Watch our video to see how easy it is to ColourPlay!
Box Contains: Flexson SONOS ColourPlay Skin for SONOS SUB Gloss White
and Applicator.
These 19" Blanking Panels provide a neat way of closing off any unused space in a rack and give a neat and tidy appearance to the finished installation. Available in sizes 1U, 2U, 3U, 4U.
This caged nut insertion and removal tool is ideal for helping
installers insert cage nuts into cabinets, and to aid removal. Saves
time and is much safer than using a screwdriver.
Available in 1U and 2U sizes with four 70mm Management Rings.
Complete Fitting Sets comprising, 6m screws, washers and cage nuts are available in packs of 50 and 100.
Fusion Contract Series 150mm Cable Tray. Available in 18u, 27u, 39u & 42u sizes.
1u Rack Mounted Fan Unit, Suitable for Both Floor and Wall Enclosures.
These quiet running units, (36dB - 38dB) are available in 2, 3 & 4 way versions for both Floor and Wall Cabinets. Ideally 2 and 3 way version should be used in Wall Cabinets and the 4 way version in floor cabinets.
High quality horizontal mounting power distribution unit with 4, 8 or 12 IEC power outlets. Complies with BS 5733. Mains cable 3m.
A high quality range of horizontal and vertical power distribution units
with angled sockets (vertical units only) and available in 1 to 12U
vertical and horizontal as standard or filtered units.
Each unit is
supplied with items listed on the Features tab.
IEC Male to IEC FeMale Extension Cable.
Available in 2m, 3m or 5m lengths.
For covering unused rack space and providing a neat finish to an installation. Available in 1 Space (15mm) or 2 Space (30mm).
Used to give smarter appearance to cabinet and prevent dust ingress.
Available in 1U height.
A 5 ring 1U management bar with 3 rings fixed, whilst the outside rings are able to rotate through 360 degrees, allowing vertical and horizontal cable management.
70mm x 70mm 'Jumper' Rings desinged for vertical management on 800mm Floor Cabinets
65mm x 45mm 1U Rings designed to give extra management on all Floor and Wall Cabinets
Fusion Caged Nut Set.
Supplied in packs of 100.
Power distributon box with UK 13A outlets and a 3m IEC C14 lead. Filtered.
350mm Shelf for 600mm Enclosure, Heavy Duty Fixed Shelf, Maximum Even Load Capacity 100kg.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
This fixed shelf is for 600mm deep cabinets and is 350mm deep. Static weight capacity 110kg.
1U Cable Management Bar with four 100mm management rings. Ideal for larger diameter cables.
Fusion Cat 6 24 Port 1U Patch Panel. Includes rear management bar.
Supersedes T70-9816 version.
Fusion Cat 6 UTP patch panels meet all current specifications for Category 6 connecting hardware. These patch panels also provide a backward compatibility with the Cat 5 and 5e systems. They provide quick and easy termination via Krone style IDC blocks.
Supplied with rear cable management bar, 4 piece caged nut set and cable ties.
2u 48 Port CAT6 UTP Patch Panel, Rear Cable Management Bar, Cable Ties and 4 Piece Caged Nut Set Included
Fusion Cat 6 UTP patch panels meet all current specifications for Category 6 connecting hardware. These patch panels also provide a backward compatibility with the Cat 5 and 5e systems. They provide quick and easy termination via Krone style IDC blocks.
Supplied with 4 piece caged nut set and cable ties and includes rear management bar.
This product supersedes the discontinued T70-9817.
These 600 x 450mm deep wall cabinets are manufactured from 1.2mm steel and feature removable side panels for maximum access and a reversible, reinforced glass door.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
42u 600 (W) x 600 (D) MM Free Standing Enclosure, Glass Door.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
These free standing cabinets are manufactured from 1.5mm steel and have a static load capacity of 800kg. They feature a reversible door with swing handle lock and tinted, toughened glass panel. The bolted construction means they can be dismantled for access if required.
Free Standing Cabinets are usually despatched by separate transport and are subject to an additional delivery charge - please enquire when purchasing.
These 600 x 550mm deep, two section wall cabinets are manufactured from 1.2mm steel and feature removable side panels for maximum access and a reversible, reinforced glass door.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
18u 600 (W) x 600 (D) MM Free Standing Enclosure, Mesh Door.
These 600 x 600mm free standing cabinets are manufactured from 1.5mm steel and have a static load capacity of 800kg. They feature a reversible front door with slam latch and a mesh construction. The bolted construction means they can be dismantled for access if required.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
Free Standing Cabinets are usually despatched by separate transport and are subject to an additional delivery charge.
27u 600 (W) x 600 (D) MM Free Standing Enclosure, Mesh Door.
These 600 x 600mm free standing cabinets are manufactured from 1.5mm steel and have a static load capacity of 800kg. They feature a reversible front door with slam latch and a mesh construction. The bolted construction means they can be dismantled for access if required.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
Free Standing Cabinets are usually despatched by separate transport and are subject to an additional delivery charge.
39u 600 (W)x600 (D) MM Free Standing Enclosure, Mesh Door.
These 800 x 600mm free standing cabinets are manufactured from 1.5mm steel and have a static load capacity of 800kg. They feature a reversible front door with slam latch and a mesh construction. The bolted construction means they can be dismantled for access if required.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
Free Standing Cabinets are usually despatched by separate transport and are subject to an additional delivery charge.
These 600 x 450mm deep wall cabinets are manufactured from 1.2mm steel and feature removable side panels for maximum access and a reversible, reinforced glass door.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
*Image shows 12U version*
Due to the size of this cabinet, it will be dispatched on a pallet to ensure safe passage and will be subject to an additional delivery charge - please enquire when purchasing.
These 600 x 550mm deep, two section wall cabinets are manufactured from 1.2mm steel and feature removable side panels for maximum access and a reversible, reinforced glass door.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
*Image shows 9U version.*
Due to the size of this cabinet, it will be dispatched on a pallet to ensure safe passage and will be subject to an additional delivery charge - please enquire when purchasing.
42u 600 (W)x600 (D) MM Free Standing Enclosure, Mesh Door
These 600 x 600mm free standing cabinets are manufactured from 1.5mm steel and have a static load capacity of 800kg. They feature a reversible front door with slam latch and a mesh construction. The bolted construction means they can be dismantled for access if required.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
Free Standing Cabinets are usually despatched by separate transport and are subject to an additional delivery charge.
These 600 x 450mm deep wall cabinets are manufactured from 1.2mm steel and feature removable side panels for maximum access and a reversible, reinforced glass door.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
These 600 x 550mm deep, two section wall cabinets are manufactured from 1.2mm steel and feature removable side panels for maximum access and a reversible, reinforced glass door.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
This sliding shelf is 350mm deep and extends out by 260mm. Static weight capacity 35kg.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
This vented cantilever shelf fixes to the front mounting profiles and is 200mm deep, 1U high. Maximum even Load Capacities 5kg
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
This vented cantilever shelf fixes to the front mounting profiles. This shelf is 300mm deep and 1U high. Maximum even Load Capacities 10kg.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
This 4 way fan try is designed to quickly fit into the cabinet roof panel and is supplied with 1.9m cable. Single fan noise at 100CFM is 25dBA.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
These 600 x 600mm free standing cabinets are manufactured from 1.5mm steel and have a static load capacity of 800kg. They feature a reversible door with slam latch and tinted, toughened glass panel. The bolted construction means they can be dismantled for access if required.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
Free Standing Cabinets are usually despatched by separate transport and are subject to an additional delivery charge.
27u 600 (W)x600 (D) MM Free Standing Enclosure, Glass Door.
These 600 x 600mm free standing cabinets are manufactured from 1.5mm steel and have a static load capacity of 800kg. They feature a reversible door with slam latch and tinted, toughened glass panel. The bolted construction means they can be dismantled for access if required.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
Free Standing Cabinets are usually despatched by separate transport and are subject to an additional delivery charge.
These 600 x 600mm free standing cabinets are manufactured from 1.5mm steel and have a static load capacity of 800kg. They feature a reversible door with slam latch and tinted, toughened glass panel. The bolted construction means they can be dismantled for access if required.
Designed for large contract applications, the Fusion Contract series cabinets offer stylish design and top quality at highly competitive prices.
The range comprises standard wall cabinets, swing back cabinets and free standing cabinets, all complying with ANSI/EIA RS-310-D, IEC60297-2 and DIN41494 Part 7.
Free Standing Cabinets are usually despatched by separate transport and are subject to an additional delivery charge.
Power distributon box with UK 13A outlets and a 3m lead terminated in an IEC plug. Filtered. Available in 6-way or 12-way.
High quality vertical mounting power distribution unit with 6, 8 or 12 IEC power outlets. Complies with BS 5733.
A high quality range of horizontal and vertical power distribution units
with angled sockets (vertical units only) and available in 1 to 12U
vertical and horizontal as standard or filtered units.
Each unit is
supplied with the items listed on the Features tab.
Whether a conventional point-to-point system or a fully fledged multi-zone environment, organisation organisation of the numerous components is essential when creating the perfect installation. The equipment rack can typically become a very complex place, especially when employing multiple point-to-point extenders, repeaters and break out boxes.
The RAX series of racking solutions offers installers the ideal solution to house multiple components neatly and securely, but still offering simple access for servicing. The RAX-300 is a 3U rack mount housing conforming to standard rack depth and width sizes. The RAX-300 is capable of housing up to 15 individual components.
A range of accessories are also available to power, cool and aesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break
out boxes.
The RAX series of racking solutions offers installers
the ideal solution to house multiple components neatly and securely, but
still offering simple access for servicing. The RAX-600 is a 6U rack
mount housing conforming to standard rack depth and width sizes. The
RAX-600 is capable of housing up to 15 individual components.
A range of accessories are also available to power, cool and aesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break
out boxes.
The RAX series of racking solutions offers installers
the ideal solution to house multiple components neatly and securely, but
still offering simple access for servicing. The RAX-B-300 is a 3U blanking plate compatible with the RAX-300.
A range of accessories are also available to power, cool, as well aesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break
out boxes.
The RAX series of racking solutions offers installers
the ideal solution to house multiple components neatly and securely, but
still offering simple access for servicing. The RAX-B-600 is a 6U blanking plate compatible with the RAX-600.
A range of accessories are also available to power, cool and aesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break
out boxes.
The RAX series of racking solutions offers installers
the ideal solution to house multiple components neatly and securely, but
still offering simple access for servicing. The RAX-FAN-300 is a 3U cooling fan component compatible with the RAX-300 series.
A range of accessories are also available to power and asaesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break
out boxes.
The RAX series of racking solutions offers installers
the ideal solution to house multiple components neatly and securely, but
still offering simple access for servicing. The RAX-FAN-600 is a 6U cooling fan component compatible with the RAX-600 series.
A range of accessories are also available to power and asaesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break-out boxes.
The
RAX DC Power Manager is the perfect solution for providing multiple
devices with 12V DC power within the RAX enclosure. As well as 8 x 12V DC
power outlets the Power Manager can provide power for up to 2 x
RAX-FAN-300s. Control of the RAX-FAN modules can be accessed using the
on-board WebGUI, Telnet or RS232. The speed of the fans can be
thermostatically controlled in three stages by the Power Manager
depending on the users preference. Alternatively, the fans can be set at
a single speed.
Each of the 8 power outputs can be individually
controlled by the Power Manager. Using the WebGUI, schedules and events
can be created to power specific outputs at specific times, or for
single events. In the event of loss of power to the Power Manager, the
unit is equipped with a battery back up to preserve the memory of the
event log until power is restored.
Detailed system information
can also be accessed via the WebGUI including power inputs/outputs,
current fan speed and system temperature.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous components is
essential when creating the perfect installation. The equipment rack can
typically become a very complex place, especially when employing
multiple point-to-point extenders, repeaters and break-out boxes.
The
RAX DC Power Manager is the perfect solution for providing multiple
devices with 24V DC power within the RAX enclosure. As well as 8 x 24V
DC power outlets the Power Manager can provide power for up to 2x
RAX-FAN cooling modules. Control of the RAX-FAN modules can be accessed
using the on-board WebGUI, Telnet or RS232. The speed of the fans can be
thermostatically controlled in three stages by the Power Manager
depending on the user's preference. Alternatively, the fans can be set at
a single speed.
Each of the 8 power outputs can be individually
controlled by the Power Manager. Using the WebGUI, schedules and events
can be created to power specific outputs at specific times, or for
single events. In the event of loss of power to the Power Manager, the
unit is equipped with a battery back up to preserve the memory of the
event log until power is restored.
Detailed system information
can also be accessed via the WebGUI including power inputs/outputs,
current fan speed and system temperature. PC software is also available
for download, enabling the user to view power reports of the connected
equipment.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous components is
essential when creating the perfect installation. The equipment rack can
typically become a very complex place, especially when employing
multiple point-to-point extenders, repeaters and break-out boxes.
The
RAX DC Power Manager is the perfect solution for providing multiple
devices with 48V DC power within the RAX enclosure. As well as 8 x 48V
DC power outlets the Power Manager can provide power for up to 2 x
RAX-FAN cooling modules. Control of the RAX-FAN modules can be accessed
using the on-board WebGUI, Telnet or RS232. The speed of the fans can be
thermostatically controlled in three stages by the Power Manager
depending on the users preference. Alternatively, the fans can be set at
a single speed.
Each of the 8 power outputs can be individually
controlled by the Power Manager. Using the WebGUI, schedules and events
can be created to power specific outputs at specific times, or for
single events. In the event of loss of power to the Power Manager, the
unit is equipped with a battery back up to preserve the memory of the
event log until power is restored.
Detailed system information
can also be accessed via the WebGUI including power inputs/outputs,
current fan speed and system temperature. PC software is also available
for download, enabling the user to view power reports of the connected
equipment.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break-out boxes.
The RAX DC Power Manager is the perfect solution for providing multiple devices with 5V DC power within the RAX enclosure. As well as 8 x 5V DC power outlets the Power Manager can provide power for up to 2 x RAX-FAN-300s. Control of the RAX-FAN modules can be accessed using the on-board WebGUI, Telnet or RS232. The speed of the fans can be thermostatically controlled in three stages by the Power Manager depending on the users preference. Alternatively, the fans can be set at a single speed.
Each of the 8 power outputs can be individually controlled by the Power Manager. Using the WebGUI, schedules and events can be created to power specific outputs at specific times, or for single events. In the event of loss of power to the Power Manager, the unit is equipped with a battery back up to preserve the memory of the event log until power is restored.
Detailed system information can also be accessed via the WebGUI including power inputs/outputs, current fan speed and system temperature.
Whether a conventional point-to-point system or a fully fledged multi-zone environment, organisation of the numerous components is essential when creating the perfect installation. The equipment rack can typically become a very complex place, especially when employing multiple point-to-point extenders, repeaters and break-out boxes.
The RAX 48V Power Distribution cable is a simple solution for providing multiple devices with 48V DC power within the RAX enclosure. 8 x 48V DC power outlets are provided from the AC/DC Mains Converter. Each 48V socket has a 'Snap Locking' connector to enable simple integration with our range of compatible 48V products.
Ultra slim, twin arm wall bracket with tilt & swivel. Fits up to 65” screens.
Plasma / LCD / LED wall mount with ultra slim design and easy 'hook on' installation. Suitable for screens up to 45" (max 35kg).
VESA: up to 200x200mm
Plasma / LCD / LED wall mount with ultra slim design and easy 'hook on' installation. Suitable for screens up to 55" (max 50kg).
VESA: 75 x 75, 100x100, 200x100, 200x200, 200x300, 300x200, 300x300, 400x200, 400x300, 400x400mm
Plasma / LCD / LED wall mount with ultra slim design and easy 'hook on' installation. Suitable for screens up to 80" (max 70kg).
VESA: up to 800x400mm
Plasma / LCD / LED wall mount with simple tilt (+/- 15 ํ) adjustment and easy 'hook on' installation. Suitable for screens up to 65" (max 70kg).
VESA: 75x75, 100x100, 200x100, 200x200, 300x200, 400x400, 600x400, 800x400
Plasma / LCD / LED wall mount with simple tilt (+/- 15 ํ) adjustment and easy 'hook on' installation. Suitable for screens up to 50" (max 35kg).
VESA: 75x75, 100x100, 100x200, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400mm
Plasma / LCD / LED wall mount with easy 'hook on' installation. Suitable for screens up to 65" (max 70kg).
VESA: 75x75, 100x100, 100x200, 200x200, 200x300, 300x300, 300x200, 400x200, 400x400, 600x400, 800x400, 800x500mm
Plasma / LCD / LED wall mount with easy 'hook on' installation. Suitable for screens up to 37" (max 35kg).
VESA: 75x75, 100x100, 100x200, 200x200, 200x300, 300x200, 300x300, 400x200, 400x300mm
Plasma / LCD / LED twin arm wall mount with tilt
(+/- 15 ํ) and swivel. Suitable for screens up to 50" (max 40kgs).
VESA: 75x75, 100x100, 200x100, 200x200, 200x300, 300x200, 300x300, 400x200, 400x300, 400x400mm
Plasma / LCD / LED twin arm wall mount with tilt
(+/- 15 ํ) and swivel. Suitable for screens up to 50" (max 40kgs).
VESA: 75x75, 100x100, 200x100, 200x200
Plasma / LCD / LED slimline wall mount with tilt (+/- 40 ํ). Suitable for screens up to 32" (max 25kg).
VESA: 75x75, 100x100, 100x200mm
Plasma / LCD / LED flat mount bracket. Suitable for screens up to 32" (max 25kgs).
VESA: 75x75, 100x100, 200x100mm
Plasma / LCD / LED twin arm wall mount with tilt (+/- 40 ํ) and swivel. Suitable for screens up to 42" (max 25kgs).
VESA: 75x75, 100x100, 100x200, 200x200mm
Plasma / LCD twin arm tilt / swivel 23"
VESA mounting: 75x75, 100x100mm
Plasma / LCD / LED flat wall mount with tilt (+17 ํor -10 ํ) and swivel. Suitable for screens up to 23" (max 20kgs).
Plasma / LCD / LED flat wall mount. Suitable for screens up to 23" (max 20kgs).
VESA: 50x50, 75x75, 100x100mm
The SoundXtra Mount for Apple TV is a simple mounting solution that
means your Apple TV box will no longer take up shelf space, being
discreetly mounted out of sight. The mount - which is perfectly fitted
and colour matched for the latest (4th generation) Apple TV - can be
attached to your existing TV mount or stand, using the cable ties
provided. Or it can be wall-mounted on its own: just add screws to suit
your wall.
Designed to complement the modern styling of the Denon HEOS speakers,
the SoundXtra Floor Stand holds the HEOS 1 or HEOS 3 speaker at the
optimum listening height. It can be easily used with either HEOS
speaker. The Floor Stand has a sturdy steel base and a stylish
aluminium column; complete with cable channel to neatly route and
conceal your speaker's mains lead. Available in black and white matt
finishes; the SoundXtra floor stand is easy to assemble and comes with
both spikes for carpeted floors and adjustable ABS/rubber feet for tiled
and wood floors. Please note: the SoundXtra Floor Stand comes in a
single stand pack, so if you have a pair of speakers you will need to
order two stands. Comes with both spikes for carpeted floors and
adjustable ABS/rubber feet for tiled and wood floors.
The SoundXtra Adjustable Universal Speaker Stand allows you to angle
hi-fi and home cinema speakers up or down for perfect acoustic
alignment. Use a stand on your desk to angle sound upwards. Or use one
to angle sound down from a high shelf, or to angle your centre speaker
into the perfect position for home cinema sound.
The SoundXtra Adjustable Universal Speaker Stand is precision made from
aluminium and neatly fitted with non-slip, anti-vibration feet.
The ideal companion
for a wide range of bookshelf, standmount, active or centre channel
speakers.
The SoundXtra Adjustable Universal Speaker Stand allows you to angle
hi-fi and home cinema speakers up or down for perfect acoustic
alignment. Use a stand on your desk to angle sound upwards. Or use one
to angle sound down from a high shelf, or to angle your centre speaker
into the perfect position for home cinema sound.
The SoundXtra Adjustable Universal Speaker Stand is precision made from
aluminium and neatly fitted with non-slip, anti-vibration feet.
Ideal companion
for a wide range of bookshelf, standmount, active or centre channel
speakers.
The SoundXtra
Adjustable Universal Speaker Stand allows you to angle hi-fi and home
cinema speakers up or down for perfect acoustic alignment. Use a stand
on your desk to angle sound upwards. Or use one to angle sound down from
a high shelf, or to angle your centre speaker into the perfect position
for home cinema sound.
The SoundXtra Adjustable Universal Speaker Stand is precision made from
aluminum and neatly fitted with non-slip, anti-vibration feet.
With a choice of three sizes of stand, plus silver and black finishes,
the SoundXtra Adjustable Universal Speaker Stand is the ideal companion
for a wide range of bookshelf, standmount, active or centre channel
speakers.
The SoundXtra Multi-fit bracket allows you to wall
mount and adjust a range of speakers. It will mount speakers with a
threaded screw connection on their rear panel, including Samsung 351,
Samsung 551, Pure Jongo T2, Pure Jongo T4 and Panasonic ALL3. The mount
is made in the UK from high quality steel/ABS and finished in matt white
or matt black. The SoundXtra mount rotates (up to 360 degrees) to let
speakers be used either horizontally or vertically, plus also offers
tilt (up to 20 degrees down) and swivel (up to 45 degrees left or right)
functionality for superb sound dispersion.
