The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst the remaining three sources can be controlled locally to the extender, which can be located up to 250m away via CAT5/6 cable. This system allows for the sources to be controlled by their own original remote controls, from extended distances. A 5-eye emitter accessory can be supplied for additional control of extra source equipment.
The AU-11CA Audio Embedder lets you insert an external audio signal into any HDMI source. The device allows you to insert analogue or digital stereo and multi-channel digital surround sound signals (via Optical) to give users the capability to overcome audio issues within complex HDMI installation. The AU-11CA also repeats the HDMI signal to allow an extended total HDMI cable range.
The AU-11CD is an advanced solution for repeating HDMI with integrated Audio de-embedding, up to 5.1. Connect the AU-11CD between your source and display via HDMI, and select the audio format required.
The AU-11DD is designed to decode and downmix Dolby Digital audio signals to stereo. All outputs are simultaneous which is excellent for multi-room audio environments where both digital and analogue zones are required.
The AU-11SA is an advanced solution for HDMI to HDMI repeating with Audio de-embedding. Its compatible with v1.3 HDMI specifications, a cutting edge technology which defines the transfer of deep colour (12 bit) video with a high bandwidth of up to 225Mhz. Connect to source and display (HDMI), select the required audio format & output your audio format to your amplifier.This device has advanced firmware allowing audio to be de-embedded without the need to connect the HDMI display (no sink-end required).
The AU-1HARC is designed to extract the
audio signal from any ARC (Audio Return Channel) enabled HDTV and convert it to a line-level analogue stereo signal. This device is perfect for use with HDTV's with no dedicated audio output allowing the audio to be extracted from the ARC enabled HDMI connection and sent to a non-HDMI equipped amplifier, AVR, or active speakers. It supports HDMI audio sampling rates up to 192 kHz and provides an analogue 2-channel stereo output using the integrated DAC (Digital to Analogue Converter).
The AU-A300 is a compact 2 channel digital amplifier that is perfect for providing high quality audio distribution into remote AV zones within any multi-room installation.
This advanced solution can integrate HDMI audio outputs from a CYP matrix, local inputs (iPod and MP3 etc) via the stereo and digital inputs and even utilise the audio output from a TV, which is growing in popularity as a dedicated source within an AV system.
The AU-A300-HBT is a compact 2 channel digital receiver that is perfect for providing high quality audio distribution in remote AV zones within any multi-room installation. This advanced solution can integrate local HDMI and remote HDBaseT sources from a CYP matrix, local inputs (iPod and MP3 etc) via the stereo and digital inputs and even utilise the audio output from a TV, which is growing in popularity as a dedicated source within an AV system. The device also incorporates a HDBaseT output that can be used for creating additional HDBaseT zones or used to repeat the signal to further HDBaseT 2-Channel Digital AV Receivers.
The AU-A50 is a compact 2 channel digital zone amplifier that is perfect for providing high quality audio distribution into remote AV zones within any multi-room installation. This advanced solution can integrate digital and analogue audio signals from multiple sources, including an audio output from a TV, enabling sound re-enforcement within any zone.
The AU-D12 is a digital audio splitter with one Optical (Toslink) input to two Optical (Toslink) outputs, which maintains a reliable and loss-less audio signal transmission.
The AU-D14 is a digital audio splitter with one Optical (Toslink) input
to four Optical (Toslink) outputs, which maintains a reliable and
loss-less audio signal transmission.
The AU-D18 analogue stereo Lip Sync Corrector is a small device for correcting audio lip sync issues. This solution features a manually adjustable timing selector dial which can be adjusted so that the users may fine tune the timing of the audio so that it is in sync with the video signal, overcoming any annoying sound mismatch to the display or amplifier.
The AU-D2 is a versatile digital audio converter, either coaxial to optical or optical to coaxial. Simply select one of the digital audio inputs for two identical audio signals in both output formats.
The AU-D21 is an Optical (Toslink) switcher, select between two Optical (Toslink) sources to one Optical (Toslink) output & maintain a reliable and loss-less audio signal transmission.
The AU-D3-192 is designed to convert either Coaxial or Optical signals from a digital stereo signal to analogue stereo audio. With an advanced 192kHz sampling rate, this unit is particularly useful for enhancing sound reproduction when connecting digital sources to analogue amplifiers.
The AU-D4 is designed to convert analogue stereo audio to Digital Coaxial and Optical (Toslink) outputs simultaneously.
The AU-D41 Optical Audio Switcher has four optical inputs and one optical output. This device allows users with up to four optical sources, the ability to switch between sources whilst connected to one output display or amplifier. All signals are bypassed without delay. This device has 'last memory function' and an IR remote control for convenient use.
The AU-D9 is a versatile audio converter allowing users to convert analogue audio into digital or digital audio into analogue. It can simultaneously output in all 3 audio formats without any signal loss.
The AU-D820 allows the user to switch and distribute 4 Digital Coaxial inputs and 4 Digital Optical audio inputs to 10 Digital Coaxial and 10 Digital Optical outputs. Select any audio input for distribution of the audio signal to all outputs simultaneously. Incoming audio signals are converted to allow all optical and coaxial outputs to operate simultaneously.
Supporting sampling rate up to 192kHz and audio signal up to 5.1CH, this device maximises audio distribution to multiple outputs. A typical application for this switching and distribution device is for use in retail environments such as a hi-fi store. It allows multiple audio source signals to be easily managed for demonstration of sources and amplifiers to a consumer, for example.
Control is via selection buttons on the device or via IR or RS-232.
The AU-IP21 has the choice of Optical or analogue stereo inputs, outputting to analogue L/R with the choice of mono or stereo. Telnet and Web GUI control provide remote control over a network. The Web GUI inputs labels can be edited allowing the user to customize the interface. Ideal for adding remote volume control to amplification systems.
The PU-305BD-RX is designed to receive digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample rate.This extender set also supports RS-232 signals over the same CAT5e/6 cable. The PU-305BD-RX can be powered at either end using the supplied PSU adaptor for added flexibility. Digital audio signals are supported up to a sample rate of 192Khz, and support for LPCM Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.
The PU-305BD-RX is designed to work with the PU-305BD-TX receiver or the PU-305BDA-TX analogue transmitter.
The PU-305BD-KIT is perfect for multi-room AV systems where the optical audio from a HDTV or amplifier can be routed back to a rack matrix for further distribution throughout a wider multi-room AV system.
The PU-305BD-TX transmitter is designed to send digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample rate.This extender set also supports RS-232 signals over the same CAT5e/6 cable. The PU-305BD-TX can be powered at either end using the supplied PSU adaptor for added flexibility. Digital audio signals are supported up to a sample rate of 192Khz, and support for LPCM Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.
The PU-305BD-TX is designed to work with the PU-305BD-RX receiver or the PU-305BDA-RX analogue receiver.
The PU-305BD-KIT is perfect for multi-room AV systems where the optical audio from a HDTV or amplifier can be routed back to a rack matrix for further distribution throughout a wider multi-room AV system.
The PU-304-KIT is designed to send digital audio signals over 150m over CAT5e/6 cable infrastructure. This device supports both Coaxial and Optical signals and can transmit these signals up to 150m. The PU-304-KIT can be powered using a USB cable or the supplied PSU adaptor for added flexibility in a compact design. Digital SPDIF signals are supported up to a sample rate of 96Khz, and support for Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.
The PU-305BDA-RX is an analogue Stereo over CAT5e/6/7 Receiver which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Cable (PoC) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also send audio signals back to the connected transmitter.
This receiver is designed to be used with the PU-305BDA-TX Analogue Audio Transmitter or the PU-305BD-TX Digital Audio Transmitter. When combined with the PU-305BD-TX digital transmitter, the analogue audio signal will be converted and outputted as digital audio by the transmitters' built-in digital to analogue converter (DAC).
The PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Ethernet (PoE) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also receive audio signals back from the connected receiver.
This transmitter is designed to be used with the PU-305BDA-RX Analogue Audio Receiver or the PU-305BD-RX Digital Audio Receiver. When combined with the PU-305BD-RX digital receiver, the analogue audio signal will be converted and outputted as digital audio by the receivers' built-in digital to analogue converter (DAC).
The PU-444HBTE Matrix enables distribution of four HDMI sources to four HDBaseT outputs and four HDMI outputs. Each input is independently routed to any output for maximum source to screen flexibility within any AV system. The four HDBaseT outputs support the transmission of video (resolutions up to 1080p Full HD and 1920x1200@60Hz), multi-channel audio, single LAN serving, and control via 2-way IR, RS-232 or Web GUI/Telnet IP over a single CAT5e/6/7 cable (up to 100m) for each output. HDMI outputs support the same video resolutions and high definition audio via certified HDMI cables up to 15m.
The HDBaseT outputs are designed to be used with any compatible HDBaseT Receiver as follows: PU-507RX / PU-507RX-2H / PU-507RX-SCD / PU-507WPRX / PU-1109RX. These Receivers support Power over Ethernet (PoE) function so do not require a separate PSU for power.
Use the LAN serving capabilities of the matrix to add internet
connectivity to every HDBaseT output zone. In addition, this matrix also features IP
control allowing users to access and control the matrix remotely and
also allow additional options for integration of third-party control
systems.
This 4 by 4 HDMI HDBaseT™ Matrix with two additional simultaneous HDMI outputs supports the transmission of video (resolutions up to 1080p Full HD and 1920x1200@60Hz), multi-channel digital audio and control via IR, RS-232 or Web GUI/Telnet IP from four high definition sources to four HDBaseT outputs over a single CAT5e/6/7 cable (up to 100m) for each output. Output A and C have additional mirrored HDMI outputs, for added installation flexibility.
The PU-424HBTE is designed to be used with the PU-507-RX Receiver which can utilise PoE capabilities of the matrix.
Use the LAN serving capabilities of the matrix to add internet connectivity to every zone. In addition, this matrix also features IP control allowing users to access and control the matrix remotely and also allow additional options for integration of third-party control systems. CYP provide control drivers for control systems such as Control 4, RTI, Crestron, AMX, Control FX, and RTI. These are available at no extra cost.
The 4K2K 4 by 4 HDMI Matrix over CAT5e/6/7 supports the transmission of video (resolutions up to 4K2K Full HD), multi-channel digital audio from 4 HDMI sources to 4 outputs over a single CAT5e/6/7 cable (up to 100m) for each output. It supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source. This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS-232 pass-through.The PU-4H4HBTE-4K is designed to be used with any of the HDBaseT receivers that can utilise the Power over Cable (PoC) capabilities of the matrix.
The LAN serving capabilities of the matrix provide network connections in every zone.
The PU-507RX Receiver allows uncompressed HDMI signals and IP data to be received over a Single CAT5e/6/7 cable. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres.
The PU-507WPRX allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This wall plate variant of the PU-507RX receiver enables seamless integration into a standard double-gang back box.
As the Flagship 8x8 HDBaseT™ Matrix, the PU-8H8HBTE solution offers complete HDBaseT™ 5-Play™ convergence. Installers can switch and distribute up to 8 HDMI sources, LAN (Local Area Network), 2-Way IR, and PoC (Power over Cable) to lengths of up to 100m using CAT5e/6/7 cable infrastructure. Control of the matrix is via IP control, RS-232, IR remote, or manual selection buttons. This single box solution will enable an installer to confidently integrate an eight zone multi-room AV system. The PU-8H8HBTE is designed to be used with the PU-507-RX Receiver which can utilise PoC capabilities of the matrix.
Use the LAN serving capabilities of the matrix to add internet connectivity to every zone. In addition, this matrix also features IR, RS232. IP(telnet) and web GUI control allowing users to access and control the matrix remotely and also allow additional options for integration of third-party control systems. CYP provide control drivers for control systems such as Control 4, RTI, Crestron, AMX, Control FX, and RTI. These are available at no extra cost.
The PU-8H8HBTE-4K22 8 by 8 HDMI Matrix over CAT5e/6/7 supports the transmission of video (resolutions up to 4K2K Full HD, HDCP 2.2) and multi-channel digital audio from 8 HDMI sources to 8 HDBaseT outputs via single CAT5e/6/7 cables up to 100m. It supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source. This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports RS232 pass-through to the receivers. The PU-8H8HBTE-4K22 is designed to be used with any of the HDBaseT receivers that can utilise the PoC and LAN capabilities of the matrix. The LAN serving capabilities of the matrix provide network connections in every zone.
The 4K2K 8 by 8 HDMI Matrix over CAT5e/6/7 supports the transmission of video (resolutions up to 4K2K Full HD, HDCP 2.2), multi-channel digital audio from 8 HDMI sources to 8 HDBaseT LITE outputs via single CAT5e/6/7 cable up to 60m. The matrix is compatible with high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source. This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS232 pass-through to the receivers.The PU-8H8HBTPL-4K22 is designed to be used with PU-515PL-RX & PU-515PL-WPRX receivers.
The PU-8H8HBTPL is an 8x8 HDMI HDBaseT™ Lite with PoC (power over cable) Matrix. Installers can switch and distribute up to 8 HDMI sources, and 2-Way IR to lengths of up to 60m using CAT5e/6/7 cable infrastructure. Control of the matrix is via IP, RS-232, IR remote, or manual selection buttons. This single box solution will enable an installer to confidently integrate an eight zone multi-room AV system. The PU-8H8HBTPL is designed to be used with the PU-515PL-RX Receiver which enables the use of 2-Way IR control feature and which can utilise PoC capabilities of the matrix.
This matrix also features IP and RS232 control allowing users to access and control the matrix remotely and also allow additional options for integration of third-party control systems. CYP provide control drivers for control systems such as Control 4, RTI, Crestron, AMX, Control FX, and RTI. These are available at no extra cost.
This 4 by 4 HDMI HDBaseT™ Lite Matrix with two additional simultaneous HDMI outputs supports the transmission of video (resolutions up to 1080p Full HD and 1920x1200@60Hz), multi-channel digital audio, and control via IR, RS-232, or Web GUI/Telnet IP, from four high definition sources to four HDBaseT outputs over a single CAT5e/6/7 cable (up to 60m) for each output. Output A and C have additional mirrored HDMI outputs, for added installation flexibility.
The PU-424HBTL-KIT is supplied with 4x PU-514L-RX receivers which utilise the 2-way IR control capabilities of the matrix. Utilise the USB power output from a TV as an optional way of powering
the PU-514L-RX receiver unit alternative to a mains power supply.
Use the IP control feature to enable users to access and control the matrix remotely and also allow additional options for integration of third-party control systems. CYP provide control drivers for control systems such as Control 4, RTI, Crestron, AMX, Control FX, and RTI. These are available at no extra cost.
This 4 by 6 HDBaseT™ Lite Matrix utilises four HDMI inputs and four HDBaseT outputs over a single CAT5e/6/7 cable (up to 60m) for each output, plus two additional HDMI outputs. All six outputs are independent allowing any source to be distributed to any output. The HDBaseT outputs feature Power over Ethernet (PoE) functionality and allow the user to power the supplied PU-515PL-RX receivers without the need for a separate mains power supply.
The PU-442PL-KIT supports the transmission of video (resolutions up to 1080p Full HD and 1920x1200@60Hz), PoE, 2-way IR, multi-channel digital audio, and control via IR, RS-232, or Web GUI/Telnet IP. Use the IP control feature to enable users to access and control the matrix remotely and also allow additional options for integration of third-party control systems.
This 4 by 4 HDMI HDBaseT™ Lite Matrix Express Installation Kit has been developed as a robust and cost effective solution at the heart of any four zone multi-room environment. Supplied complete with a HDBaseT™ Lite Matrix plus four PU-514L-RX receivers, the kit enables an installer to easily and confidently configure a 4-zone multi-room AV system using HDBaseT Lite technology and distribute content throughout the system over a Single CAT5e/6/7 cable infrastructure.
The Express Install Kit supports the transmission of video (resolutions up to 1080p Full HD and 1920x1200@60Hz), multi-channel digital audio, and control via IR, RS-232, or Web GUI/Telnet IP, from four high definition sources to four HDBaseT outputs over a single CAT5e/6/7 cable (up to 60m) for each output.
The PU-44XL-KIT is supplied with 4x PU-514L-RX receivers which utilise the 2-way IR control capabilities of the matrix. Utilise the USB power output from a TV as an optional way of powering
the PU-514L-RX receiver unit alternative to a mains power supply.
Use the IP control feature to enable users to access and control the matrix remotely and also allow additional options for integration of third-party control systems. CYP provide control drivers for control systems such as Control 4, RTI, Crestron, AMX, and Control FX. These are available at no extra cost.
The 4K2K 4 by 4 HDMI Matrix over CAT5e/6/7 supports the transmission of video (resolutions up to 4K2K Full HD), multi-channel digital audio from 4 HDMI sources to 4 outputs over a single CAT5e/6/7 cable (up to 60m) for each output. It supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source.
This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS-232 pass-through.The PU-4H4HBTPL-4K is designed to be used with PU-515PL-RX supplied in the kit.
The PU-514L-RX is a Receiver Unit designed to be used with PU-514L-TX Transmitter, and any compatible HDBaseT™ Matrix or Distribution Amplifier. It allows uncompressed HDMI, and 2-way IR signals to be received via a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering
the PU-514L-RX receiver unit alternative to a mains power supply.
Compatible devices:
PU-514L-TX / PU-44XL-KIT / PU-4H4HBTL / PU-8H8HBTE / PU-8H8HBT / PU-8H8HBTL
Specific feature compatibility may vary dependant on the transmission device.
The PU-515PL-RX allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
The PU-515PLRX-2HCD Receiver allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This device allows the distribution of Video, Audio, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres. This variant of the PU-515-RX Receiver provides dual HDMI outputs for added flexibility enabling distribution to 2 displays within a zone and also provides both digital and analogue audio outputs for local amplification.
The OR-HD88HC Matrix Switcher connects eight HDMI sources to 16 displays. This matrix features 8 HDMI outputs and each HDMI output is mirrored to provide a Twin CAT output which runs simultaneously. Connect a PU-1106RX Receiver to each of the Twin CAT outputs to extend the HDMI signal up to 45m for multi-room connectivity. This device supports ‘Deep Colour’, High Definition Audio, and 3D signal compatibility.
This matrix switcher can be controlled via the supplied IR
Remote Control, RS-232, IP(telnet) and web GUI or by using the selection buttons on the front
of the unit.
The unit also allows additional options for integration of third-party control systems. CYP provide control drivers for control systems such as Control 4, RTI, Crestron, AMX, Control FX, and RTI. These are available at no extra cost.
The OR-HD62CD allows HDMI signals to be routed from any of the six connected HDMI sources for display on two connected HDMI displays. With fast switching technology this device dramatically improves the sync time to the connected HDMI displays over traditional switchers. In Matrix Mode, it allows any source to be routed independently to any output. An on-board EDID management tool (via on screen display) can be utilised for advanced audio and video signal management. In addition, this switcher also includes a cutting edge Picture in Picture (PIP) preview mode allowing the user to show 5 unselected HDMI sources in a row of small windows overlaid on top of the primary selected HDMI source video . In preview mode, both HDMI outputs show identical feeds. Further features include the ability to de-embed Hi-Definition lossless audio via a dedicated Optical output for each HDMI output, 4K resolution support, and 3D signal support.
Control is via front panel buttons, IR remote control, RS-232, Telnet or IP control for easy integration into control systems such as Control 4.
The PU-O4H4C HDMI matrix has 4 HDMI input and 4 CAT5e/6 transmitter outputs up to 40m. Each of the four HDMI sources can be directed to any one of the four CAT outputs, so each display can show the same or a different source. This unit requires pairing with CYP PU-1106RX receivers to convert each of the outputs back to HDMI for connection to the display. The PU-O products within the PUMA range combine HDMI over CAT5e/6 (PUMA) & HDMI Matrix switcher (ORBIT) to provide versatility to HDMI installations.
The QU-16E-4K is a versatile 1 to 16 HDMI distribution amplifier. This product is designed to be used in a 19” rack and will distribute uncompressed HDMI signals up to 4K resolutions. Each buffered output can run 1080p/8-bit up to 10 metres and can be cascaded up to two layers.
The
AU-D5D is a digital to analogue converter (DAC) which allows the user to easily
downmix digital coaxial signals to analogue stereo audio. The AU-D5D features Dolby Digital and DTS decoding allowing for seamless integration to any
AV system.
The
AU-22DD is a versatile audio converter allowing users to convert analogue audio signals to digital or digital audio signals to analogue. The AU-22DD supports Dolby Digital
and DTS audio downmixing, and can simultaneously output from all 3 audio formats without
any signal loss, adding extra flexibility to your AV system.
The OR-HD62CD-4K22 is an advanced 4K HDR HDMI matrix
switcher designed for both commercial and residential applications.
The 6 x 2 HDMI matrix switch enables 4K HDR (6G) HDCP
2.2 HDMI
signals to be routed from any of the six HDMI inputs to either of the
two independent HDMI outputs. Further
features include fast switching technology, on-board EDID management
tool (via
on screen display) and optical audio de-embedding for added flexibility
of installation.
Control is via front panel buttons, IR remote control,
RS232, Telnet or IP control for easy integration into control systems.
The PU-1109RX Receiver features 5-Play™ HDBaseT™ technology. This will allow the user to distribute uncompressed HDMI, 2-Way IR, 2-Way RS-232, PoE and 3 individual LAN connections over a Single CAT5e/6/7 cable, to lengths of up to 100m.
The PU-1109TX Transmitter features 5Play HDBaseT technology. This will allow the user to distribute uncompressed HDMI, 2-Way IR, 2-Way RS-232, PoE and 3 individual LAN connections over a Single CAT5e/6 cable, to lengths of up to 100m.
The PU-506-RX allows uncompressed HDMI signals to be received over a Single CAT5e/6/7 cable when used with the PU-506-TX Transmitter. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. Utilise the USB power output from a TV as an optional way of powering
the PU-506-RX receiver unit alternative to a mains power supply.
The PU-506-TX allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable when used with the PU-506-RX Receiver. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. Utilise the USB power output from a TV as an optional way of powering
the PU-506-RX receiver unit alternative to a mains power supply.
The PU-507TX Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Ethernet (PoE), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres.
The PU-507RX-2H Receiver allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This variant of the popular PU-507RX Receiver provides dual HDMI outputs for added flexibility enabling distribution to a second display within a zone as an alternative to using an additional Distribution Amplifier.
The PU-507RX-2HCD Receiver allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This variant of the PU-507RX Receiver has 2 LAN ports and provides dual HDMI outputs for added flexibility enabling distribution to 2 displays within a zone. This unit also provides both digital and analogue audio outputs for local amplification.
The PU-507RX-SCD Receiver allows uncompressed HDMI signals and IP data to be received over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This receiver also features an on-board scaler with audio breakout enabling the installer to maximise video resolution support to the display whilst de-embedding stereo audio via an optical connection within the zone.
The PU-507TX-1H Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This variant of the popular PU-507-TX Transmitter has a simultaneous HDMI output enabling a local HDMI display to be connected whilst simultaneously distributing the signals over a single CAT5e/6/7 to a compatible HDBaseT Receiver.
The PU-507TX-HDVGA allows VGA and uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable to lengths of up to 100 metres. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Ethernet (PoE), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. This transmitter allows the user to select and switch between a HDMI or VGA source whilst the integrated scaler ensures maximum resolution support for the connected display. Additionally, the PU-507TX-HDVGA utilises an auto-scan feature which detects and switches to the last active input.
The PU-607BD-RX Receiver allows uncompressed HDMI signals and IP data to be received via a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Receiver is designed to be used with the PU-607BD-TX or PU-607BDWP-TX Transmitters only, which enables Bi-Directional Power over Cable (PoC) functionality.
The PU-607BD-TX Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Transmitter is designed to be used with the PU-607BD-RX and PU-607BDWP-RX Receivers only, which enables Bi-Directional Power over Cable (PoC) functionality.
The PU-8H8CTX solution offers advanced point-to-point distribution of HDBaseT™ signals up to lengths of 100m over single CAT5e/6/7 cable infrastructure. With the potential for use with any standard 8 HDMI output matrix or distribution amplifier, this solution can work with any matrix/DA to add 8 HDBaseT™ outputs with only a single power supply.
The PU-607BDWP-RX Wallplate Receiver allows uncompressed HDMI signals and IP data to be received via a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Receiver is designed to be used with the PU-607BD-TX and PU-607BDWP-TX Transmitters only, which enables Bi-Directional Power over Cable (PoC) functionality.
The PU-607BDWP-TX Wallplate Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Transmitter is designed to be used with the PU-607BD-RX and PU-607BDWP-RX Receivers only, which enables Bi-Directional Power over Cable (PoC) functionality.
The PU-514L-TX is a Transmitter Unit designed to be used with PU-514L-RX Receiver. This device allows uncompressed HDMI, and 2-way IR signals to be transmitted over a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering
the PU-514L-RX receiver unit alternative to a mains power supply.
The PU-515PL-TX Transmitter allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
The PU-514L-WPRX is a wall plate receiver unit designed to be used with PU-514L-TX Transmitter, and any compatible HDBaseT™ Matrix or Distribution Amplifier. It allows uncompressed HDMI, and 2-way IR signals to be received via a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering the PU-514L-WPRX receiver unit alternative to a mains power supply.
Compatible devices:
PU-514L-TX / PU-44XL-KIT / PU-4H4HBTL / PU-8H8HBTE / PU-8H8HBT / PU-8H8HBTL
Specific feature compatibility may vary dependant on the transmission device.
The PU-HBT-EX repeater is designed to extend the signal transmission distances of CYP HDBaseT™ Extender sets and Matrix systems by allowing the user to repeat HDBaseT™ signals a further 100m over CAT5e/6/7 cable. This device features full 5-Play™ functionality, including the highest quality 4K2K uncompressed HD video, uncompressed multi-channel audio, bi-directional control systems (IR & RS-232), Power over Cable (PoC), and Ethernet (for LAN serving & IP Control). This Repeater is designed to be used with the PU-507 and PU-1109 point-to-point Extender Kits, the PU-8H8CTX & PU-8H8CTXIR 8-Way Transmitters, and with any CYP full HDBaseT™ Matrix system (PU-8H8HBT / PU-8H8HBTE / PU-4H4HBT).
When combined with CYP HDBaseT™ distribution solutions, this Repeater gives any installer the ability to send Audio, Video, PoC, and Control signals reliably up to 200m. The PU-HBT-EX can also be cascaded twice to achieve a maximum of 300m transmission distance.
The PU-HBTE-ZE HDBaseT Zone extender is designed to allow AV integrators to easily create additional zones for any HDBaseT distribution system whilst enabling the HDBaseT pass-through signal to be extended further over CAT5e/6/7 (up to 100m). This device supports the transmission of video (resolutions up to 1080p Full HD, plus 4K Ultra High Definition, and
1920x1200@60Hz), multi-channel digital audio and control via IR, RS-232
or Web GUI/Telnet IP over a single CAT5e/6/7 cable. The Zone extender allows signals to be transmitted up to 100m from the transmitter device to the Zone extender where the signal can be routed to a local display via the HDMI output. The signal is also transmitted simultaneously via the HDBaseT output enabling it to be distributed up to 100m over CAT5e/6/7 from the zone. The PU-HBTE-ZE Zone extender utilises PoC (Power over Cable) to provide power to the connected Receiver unit, thus no requirement for a PSU on the Receiver end. This device can be cascaded multiple times to create additional zones.
In addition, the LAN functionality provides the ability to add internet connectivity to every zone which is particularly useful when connecting SMART displays.
The PU-HBTL-EX repeater is designed to extend the signal transmission distances of CYP HDBaseT™ LITE Extender sets and Matrix systems by allowing the user to repeat HDBaseT™ LITE signals a further 60m over CAT5e/6/7 cable. This device features 3-Play™ functionality, including the highest quality 4K2K uncompressed HD video, uncompressed multi-channel audio, bi-directional IR control and RS-232 signals. This Repeater is designed to be used with the PU-513L-KIT and the PU-514L-KIT point-to-point Extender Kits, and with any CYP HDBaseT™ LITE Matrix system (PU-8H8HBTL / PU-424HBTL-KIT / PU-44XL-KIT).
The PU-HBTL-EX can also be cascaded twice to achieve a maximum of 180m transmission distance.
The CA-COMP100R is a PC/HD and audio receiver (rx) over CAT5 solution. CA-COMP100R can receive Component or RGBHV signals through CAT-5 Cables up to a distance of 100m - will require a transmitter unit (CA-COMPAT).
The PU-1107TX can transmit a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Transmitter unit is designed to be used with the PU-107RX receiver to extend HDMI signals to a single screen, with the added benefit that it can be used with the PU-1107EX Extender, for achieving even greater distances.
The PU-1106RX Receiver allows you to extend HDMI signals up to 40m over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Receiver.
The PU-1106RX is specifically designed to be used with the PU-1106TX Transmitters.
The PU-1106TX Transmitter allows you to extend HDMI signals over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Blaster.
The PU-1106TX is specifically designed to be used with the PU-1106RX Receiver.
The RE-101 repeater equalises and recovers the full HDMI signal to provide an ‘as new’ signal allowing it to be repeated for extended distances and cascaded multiple times. This device uses v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio with a high bandwidth up to 225MHz.
The
EL-5500 is an advanced rack mountable HDMI, VGA, Composite, and Component presentation switcher. This
device
can scale and switch input sources to it's two HDMI
outputs, with their associated audio signals to the native resolutions
supported by the connected display. Control is via the IR remote, RS-232, IP, or via manual selection buttons. Both digital and analogue stereo audio is supported via a built-in DAC (Digital to Analogue Converter) and ADC (Analogue to Digital Converter). The EL-5500 is the perfect solution for any educational or commercial environment requiring integration of multiple sources and signal formats to two HDMI displays.
The
EL-5500-HBT is an advanced rack mountable HDBaseT, HDMI, VGA, Composite, and
Component presentation switcher. This
device
can scale and switch eight input sources to it's two HDMI
outputs and a single HDBaseT output, with their associated audio signals to the native resolutions
supported by the connected display. This presentation switch also features a switchable digital bypass output allowing any HDMI or HDBaseT input to be directly bypassed via the HDMI bypass output.
Control is via the IR remote,
RS-232, IP, or via manual selection buttons. Both digital and analogue
stereo audio is supported via a built-in DAC (Digital to Analogue
Converter) and ADC (Analogue to Digital Converter) providing flexible audio signal integration. The EL-5500-HBT is the
perfect solution for any educational or commercial environment requiring
integration of multiple sources and signal formats to three HDMI
displays.
The PU-2H8HBTE-AD HDBaseT switch has two HDMI inputs and eight HDBaseT outputs, plus a single HDMI output. This device allows the user to select either HDMI source for distribution to all screens simultaneously. Each HDBaseT output supports the transmission of video (resolutions up to 1080p Full HD, plus 4K Ultra High Definition, and 1920x1200@60Hz), multi-channel audio, single LAN serving, and control via 2-way IR, RS-232 or Web GUI/Telnet IP over a single CAT5e/6/7 cable (up to 100m). The HDMI output supports the same video resolutions and high definition audio via certified HDMI cables up to 15m.
For additional flexibility, the PU-2H8HBTE-AD is provided with Audio De-Embedding functionality allowing easy audio integration into a wider AV system or direct connection to an AVR. Audio outputs are via a single Optical connection or an Analogue Stereo output (2x RCA).
The HDBaseT outputs are designed to be used with any compatible HDBaseT Receiver as follows: PU-507RX / PU-507RX-2H / PU-507RX-SCD / PU-507WPRX / PU-1109RX. These Receivers support Power over Cable (PoC) function so do not require a separate PSU for power.
Use the LAN serving capabilities of this switch to add internet connectivity to every HDBaseT output zone. In addition, this switch also features IP control allowing users to access and control the matrix remotely and also allow additional options for integration of third-party control systems such as Control 4.
The EL-21SY switcher accepts two HDMI inputs and allows the user to
switch between two input sources to provide a single HDMI output for
connection to the HDMI display. This switcher has an auto-detect
function which will switch the unit when a source which is powered ‘On’.
Alternatively, the input can be selected manually using the input
selection button on the device.
The EL-31SY switcher allows the user to input three HDMI sources and switch between these sources to provide a single HDMI output to a display. This switcher can be controlled via the supplied remote control or by using the input switching button on the front of the device.
The EL-41PIP is an advanced 4 Way HDMI switch with integrated Multi-view (Picture In Picture) technology. This plug and play solution offers advanced control and display options for the integration of 4 sources onto a single display. The EL-41PIP is the perfect cost effective solution for integrating CCTV or a combination of sources into any single display within any commercial or residential AV installation.
The EL-41SY switcher allows the user to input four HDMI sources and switch between these sources to provide a single HDMI output to a display. This switcher has an auto-detect function which will switch the unit when a source which is powered ‘On’. It can also be controlled via the supplied remote control or by using the input switching button on the front of the device.
The EL-42S switcher allows the user to input four HDMI sources and switch between these sources to display HD content on 2 displays. This switcher can be controlled via the supplied remote control, RS-232, or by using the input switching button on the front of the device.
The EL-C41C switcher allows the user to input four HDMI sources and switch between these sources to provide a single HDMI output to a display. This switcher can be controlled via the supplied remote control or by using the input switching button on the front of the device. The EL-C41C also features a CEC command function allowing the device to Auto-Switch on source power up.
The PU-1H2BTE splitter accepts 1x HDMI input and distributes to 2 HDBaseT™ outputs, plus 1 HDMI bypass output. The HDBaseT™ outputs allow uncompressed HDMI, LAN, PoE, IR, and RS-232 signals to be transmitted over a Single CAT5e/6/7 cable up to 100m. Installers can confidently distribute HDMI signals to 3 displays, and if required, use the HDMI bypass output to cascade the HDMI signal up to 5 times with additional HDBaseT™ splitters.
PU-507RX Receivers are recommended to utilise the full 5-Play™ functionality of the HDBaseT™ outputs of this device.
The PU-1H3HBTE enables a single HDMI source input to be distributed to 3 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution of HDMI, LAN, PoC, and IR over a Single CAT5e/6/7 cable up to lengths of 100m. Perfect for both residential and commercial AV installations, the PU-1H3HBTE can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to potentially 50 screens or more.
The PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device.
The PU-1H3HBTPL enables a single HDMI source input to be distributed to 3 HDBaseT™ Lite outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H3HBTPL can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens.
PU-515PL-RX receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device.
The PU-1H7HBTE enables a single HDMI source input to be distributed to 7 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution
of HDMI, LAN, PoC, and IR signals over a Single CAT5e/6/7 cable
up to lengths of 100m. Perfect for both residential and commercial AV
installations, the PU-1H7HBTE can distribute HDMI signals to 7 displays.
The product also includes an additional HDMI output for increased
flexibility and can also be cascaded up to 5 times to allow distribution
to potentially 50 screens or more.
PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device.
The PU-1H7HBTPL enables a single HDMI source input to be distributed to 7 HDBaseT™ Lite with PoC outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H7HBTPL can distribute HDMI signals to 7 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens.
PU-515PL-RX Receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device.
The PU-Q1H8CS has 1 HDMI input and 8 Single CAT6 outputs to simultaneously distribute a HDMI source to eight displays up to a distance of 40m. This solution is perfect for distributing the HDMI source content over longer distances than is usually achievable with HDMI cable, using cost effective CAT6 cable infrastructure.
Use the PU-107RX Single CAT6 to HDMI Receivers on each of the eight CAT6 outputs to convert back from CAT6 to HDMI for connection to the display/s.
The QU-110S-4K22 Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to 10 identical HDMI outputs. The QU-110S-4K22 is v1.4 HDMI compliant, HDCP2.2 compliant, supports 4K resolutions, 3D Video signals, ‘Deep Colour' and High Definition Audio. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
The QU-8MS Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device is 3D compatible and features a 3D signal indicator which confirms when a 3D source signal is detected. The System Reset Function switch generates a command every 10 minutes to the connected displays which resets them to the correct HDMI input. Each buffered output can run 1080p/8-bit up to 15 metres and can also be cascaded in multiple layers.
The QU-12D is a high performance, HDCP compliant, DVI distribution amplifier allowing one DVI input to be distributed to two displays simultaneously. Each of the buffered outputs can run up to 15 meters (8-bit) and can be cascaded up to 3 layers.
The PU-Q1H4C has 1 HDMI input and 3 CAT5e/6 transmitter outputs with 1 HDMI output allowing HDMI signals to be transmitted over CAT up to 40m. This device requires the CAT outputs to be connected to the PU-1106RX Receiver units. The PU-Q products within the PUMA range combine HDMI over CAT5e/6 (PUMA) & HDMI distribution (QUANTUM) to provide versitility to HDMI installations.
The CM-388M is designed to
convert digital signals from a HDMI (or DVI + Coaxial) source to Composite Video or S-Video for NTSC or PAL systems with L/R stereo audio. Besides Composite Video and S-Video outputs, this device also provides one HDMI bypass output to
deliver the original signal, and a simultaneous Coaxial output to send S/PDIF digital
audio to an audio amplifier.
The SY-298H24 will allow a HDMI source signal to be up or down scaled
according to the screen specifications required. Any HDMI signal
inputted can be scaled up or down to between 480i to 1080p, plus PC output
resolutions of VGA or UXGA. This device accepts 1080p24 input resolutions enabling content filmed at 24 frames per second displayed. This feature is particularly useful when a 1080p24 source signal is distributed to multiple displays. If any screen is not 1080p24 compatible, the SY-298H24 can be used to scale the input signal to suit the supported screen resolution, whilst not affecting the signal being sent to the 1080p24 compatible screens. This solution is perfect for home cinema enthusiasts who require full native Blu-ray resolutions in their home cinema system, whilst providing signal flexibility to other screens around the home.
The SY-300H will allow a HDMI source signal to be scaled up or down to a variety of different resolutions selectable via the OSD (On Screen Display). When set to 'native' mode, the scaler will automatically scale the HDMI input signal to the native resolution of the connected screen. This device also provides 50/60Hz frame rate conversion further enhancing compatibility with AV sources and displays.
In addition, the SY-300H includes integrated
audio embedding and de embedding using the Toslink and 3.5mm jack inputs and
outputs.
The SY-P293 is designed to scale analogue video signal from a PC source to a digital HDMI output boasting a wide-range of HDTV and PC resolutions. Audio is combined with HDMI video output. This unit offers a selection of colour space and adjustment to obtain the best picture quality.
The SY-P295N is designed to scale analogue video signal from a CV or SV source to a digital HDMI output, boasting a wide-range of HDTV and PC resolutions. Audio is combined with HDMI video output. This unit offers a selection of colour space and adjustment to obtain the best picture quality.
The SY-PT387 converts HD Component Video (YPbPr) to Composite or S-video signals for recording & distributing whilst maintaining the analogue HD for the main display.
The PRO-H2-3GSDI Dual Output Converter accepts non-HDCP protected HDMI content and will convert to dual 3G-SDI outputs simultaneously. This is perfect for extending HDMI signals over long distances (300m for SD signals) to two displays. This device benefits from a 2-channel (L/R) audio input allowing DVI signals with 2-channel audio to be converted to SDI. In addition, the PRO-H2-3GSDI has a built-in EDID management system, with EDID recorder, which ensures the highest level of source and screen compatibility.
The PRO-SDIHDMI Converter accepts SD-SDI, HD-SDI, and 3G-SDI signals and converts to HDMI. The SDI input also has a bypass which is outputted simultaneously alongside the HDMI output allowing the SDI signal to be extended over distances up to 300m. This device also has the added benefit of an integrated audio de-embedder for sending 2-channel (L/R) audio to an AV amplifier.
This Video to HDMI™ converter can convert CV/SV (NTSC or PAL or SECAM) to HDMI resolutions of XGA to UXGA, or HD resolutions of 480p to 1080p. With a frame rate conversion feature that allows users to view DVD, VCR or video game sources on the HD monitor/TV, this device has an On-Screen Display function that allows users to easily select the output resolution and the audio input, after which both the video and audio signal are combined into an HDMI signal so they can be output to a compatible display.
The SY-P290 is designed to convert and scale Digital or Analogue RGBHV or YUV to HDMI for improved viewing. This unit offers a wide selection of output resolutions/format, colour space and adjustment to obtain the best picture quality.
The SY-PT385A is a PC to Video scan converter which is
designed to convert a variety of PC analogue video signals from VGA to
WUXGA. This device also converts between interlaced NTSC or PAL video and features a frame rate conversion function in addition to an Overscan / Underscan function that allows users to view PC source on a
Composite or S-Video monitor without cropping the images.
The CR-KP1 is a wall-mount keypad control
system and is ideally suited for any AV install environment such as conference/meeting rooms, classrooms, and home cinemas allowing
commands for multiple devices such as the EL-5500 to be programmed into one
easy to use device. The CR-KP1 supports PoE (Power over Ethernet) or a DC power supply and allows full control of any devices that are on the same local network and support IP Telnet control, additionally the CR-KP1 also incorporates two contact-closure connections allowing control of third party devices such as a powered
projector screens. The CR-KP1 includes a scheduling function allowing macros to be implemented at a pre-selected time and date, for example turning all the equipment off at the end of the day.
All the features of the CR-KP1 can be programmed using the
Web Gui which can be accessed by simply searching the IP address in your
internet browser.
We have also introduced our own piece of software the CYP Discovery Protocol Service which will locate any CYP product on a network and display there product code and IP address. This piece of software can be found on the downloads tab of this page along with a application guide.
The CAT5/6 RS-232 extender is a hardware-based solution providing control of any RS-232 protocol device. This transmitter and receiver set will extend the control of RS-232 for over 250 meters. The RS-232 extender also provides full duplex transmission and hardware handshake signals, with no need for any set up or configuration.
The DS-MSC is designed to manage audio and video signals to emulate a video wall when using third-party screens. This controller will control the digital signage content for each screen on a video wall system using up to 25 screens. One controller is required per screen. If the user has only one HDMI or VGA source, then an appropriate Distribution Amplifier (Splitter) will be required to split the source signal to each of the Multi-Screen Controllers feeding the screens.
The 1 by 4 HDMI TV Wall controller allows an HDMI input source to be displayed, in full screen or single mode, on up to 4 HDMI displays (TV or monitor). Multiple units can be cascaded to extend the HDMI signal up to as many displays as needed. The unit features bezel correction function. A simple control application enables users to control single or multiple units. The device supports video timings up to WUXGA@60RB and 1080p@60Hz, audio format up to 7.1CH LPCM at 192kHz sampling rate based on input source EDID. Control can be achieved through software application (Compatible with Microsoft Windows XP & 7 Only), Telnet and RS-232.
The
DS-MSC14-4K enables a 4K video wall to be created from any third party screens,
the HDMI source can be displayed as a single image on each screen or 1 image
across all screens. A single unit will create a 2x2 video wall. Multiple units can be combined with an HDMI distribution amp to create larger video wall configurations. Control is via RS-232, Telnet IP and our downloadable application
which will allow full control of the DS-MSC14-4K from adjusting the bezel
correction to pre-set video wall layouts.
The RE-EDID is designed to allow the
adjustment and manipulation of HDMI/DVI EDID information that is provided to a source
device by a connected display so that it may output the correct
video/audio signal. Aiming to simplify the technical complications
involved in video/audio system integration, home theatre installation, and video/audio equipment testing, the unit features a learning
function allowing the user to Read and Write the video/audio EDID to the
system. It also supports EDID Emulation and Bypass modes. This device is perfect to overcome source and screen compatibility issues, particularly when integrating PC's into an AV system.
The RE-PI Power Inserter is used to insert power into a HDMI signal path for self-powering compatible HDMI products. This device is the perfect partner to the CYP RE-HDEQ HDMI Equaliser, for use when the HDMI source is not capable of sending power to the Equaliser. The RE-PI is capable of inserting up to 5V/2A into the HDMI signal path and the connected device may draw power up to this rating.
The XA-1 is the perfect analysis tool for AV installers and integrators. This device allows the user to analyse AV sources for resolution and EDID information whilst also providing pattern generation and test functions for identifying display capabilities. This small but advanced HDMI analyser also supports the analysis and pattern generation of 3D signals. This allows the user to check compatibility between sources and displays and provides a means of identifying system problems for troubleshooting.
The XA-S11 high performance HDMI v1.3 synchroniser allows the user to set up a firm EDID and CEC connection between the source and the display, eliminating the time spent on signal configuration before receiving the signal.
The XA-2 is an advanced yet compact and convenient pattern generator for testing and troubleshooting HDMI devices. There are 6 resolution settings covering 4K Ultra HD and Full HD resolutions, 4 test patterns, HDCP (1.4, 2.2 and non-HDCP), and 3 audio settings each providing a large array of test signals. With simple to use control via buttons on the front panel, and LED indicators for quick viewing of the current status, this pattern generator is a must have tool for any professional AV integrator.
The XA-4 Advanced HDMI Pattern Generator and Analyser is an integrators tool for producing 4K HDMI signals for verifying and testing wider AV installations. This device has 54 resolutions settings, 47 test patterns, and 6 analysis tests which provide over a thousand different combinations of test scenarios. It supports HDMI data packets, EDID & HDCP analysis, EDID emulation, and allows the user to save 2 custom patterns, along with the ability to generate audio up to 8 channels.
Front panel keys allow fast switching between the various functions and an OLED screen allows for quick viewing of current status information. Control is via front-panel buttons, IR, RS-232, and Telnet allowing users full flexibility in controlling the device.
The XA-HDCP is designed to enable installers to manage HDCP (High-Bandwidth Definition Content Protection) signals. Since the introduction of HDCP2.2, which is not backwards compatible with previous versions, installers face the challenge of managing copy protected content to allow AV signals to be integrated into any AV system. This device converts HDCP2.2 signals to a lower HDCP format enabling AV content to be easily integrated into a system which uses non-HDCP2.2 compliant devices, thus eliminating the need to upgrade all devices in the signal path to be HDCP2.2 compliant.
In addition to converting HDCP signals, the XA-HDCP can also analyse the content bandwidth, HDCP, EDID and Colourspace status of the inputted signal. Further features include the ability to upload EDID settings to a PC application which allows the user to create alternative EDID settings for specific applications. In addition, the XA-HDCP also acts as a HDMI repeater which equalises and recovers TMDS data before re-transmitting, thus ensuring optimal quality regardless of the incoming signal. This equalisation and repeater function enables the HDMI cable distance to be extended 5m from the output at full 4K (6G) resolution.
Control is via the direct selection keys, which allow easy switching between modes, and status LED's provide 'at-a-glance' viewing of the device status.
This HDMI/DisplayPort/VGA to HDMI Scaler with HDBaseT LITE Output is designed to switch and scale up to 5 AV inputs to simultaneous HDMI and HDBaseT LITE outputs at resolutions up to 1080p/WUXGA. The HDBaseT LITE output enables the user to send the signals up to 60m over a single CAT5e/6/7 cable and supports PoC (Power over Cable) to provide power to the connected HDBaseT LITE receiver (PU-515PL-RX or PU-515PL-WPRX). Additionally, this device offers 3 analogue Line level audio inputs, a switchable Microphone input and a Line level output. The microphone input features a 48V 'Phantom' power mode for use with professional microphones. The audio DSP engine provides auto-mixing and auto-gain control to mix or reduce the background audio in order to enhance the main audio source. The system can be controlled and easily configured via WebGUI, IR remote control or RS-232. This device is an ideal solution for presentation facilities within a classroom and/or conference room.
The EL-42PIP is a High Performance HDMI switch with integrated scaling and multi-view (PIP) technology. This unit id the ideal solution for monitoring or displaying multiple sources simultaneously, making it highly suited for corporate, commercial or classroom environments.
Any one of the four HDMI sources can be displayed individually in full screen mode, or displayed in a umber of pre-configured formats in the PIP mode. Management of the input sources routing, position and sizing can be controlled easily using the OSD, WebGui or front panel controls. The input sources can then be outputted via the units two mirrored HDMI outputs. The unit also acts as a seamless switcher providing additional confidence in demanding corporate environments.
The PUV-2000RX Slimline Receiver supports video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
All of these features are encorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The PUV-2000TX Slimline Transmitter enables transmission
of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
All of these features are encorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The PU-2010RX Slimline Receiver supports video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x USB ports, giving the PU-2010RX Receiver the ability to act like a USB hub.
All of these features are incorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The PUV-2010TX Slimline Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x USB ports, giving the PU-2010RX Receiver the ability to act like a USB hub.
All of these features are incorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The QU-2-4K22 Distribution Amplifier (splitter) accepts one HDMI input
and splits this signal to two identical outputs. This device supports
4K2K Ultra-High Definition video with HDMI2.0 and HDCP2.2 compliance. In
addition, 3D Video signals and High Definition Audio formats such as
LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD
Master Audio, audio sampling rate up to 192kHz are also supported.
When a mixture of displays with different specifications and resolutions are connected, each output can automatically scale 4K to 1080p or apply color space conversion (4:4:4 to 4:2:0), as appropriate, based on each connected display’s EDID requirements. CEC “active source” command can be enabled to periodically reset input selection on CEC compatible connected displays. This unit is controlled via front-panel switches with easy to read status LED's.
The PU-1107RX can receive a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Receiver unit is designed to be used with the PU-1107TX to extend HDMI to a single screen, and the PU-Q1H8CS Splitter for converting the splitters' single CAT6 outputs, back to HDMI for connection to your displays.
The PUV-44XPL-4K22-KIT is a HDMI/HDBaseT LITE Matrix which supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2) and multi-channel digital audio from 4 HDMI sources to 4 HDBaseT LITE outputs and 2 independent HDMI outputs. HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
This matrix also features audio breakout whereby de-embedded analogue L/R audio outputs are provided for each of the HDBaseT zones (A to D). The Power over HDBaseT (PoH) function provides power to the supplied PUV-1210PL-RX receivers which also support 2-way IR and RS-232 pass-through.
Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems.
The AU-11CD-4K22 is an advanced solution for repeating
HDMI with integrated Audio de-embedding, up to 5.1. Connect the AU-11CD-4K22
between your source and display via HDMI, and select the audio format
required. This device supports 4K resolutions, HDMI 2.0 and HDCP 2.2
enabling flexible audio signal management from ultra high definition video
signal paths. The built-in HDMI repeater function allows users to extend the transmission distance of up to 4K2K@60 resolutions a further 5m from the device HDMI output.
The PUV-1082-4K22 HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 10 HDMI sources to 8 HDBaseT outputs and 2 independent HDMI2.0 outputs. HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 100m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
This matrix incorporates an independent audio matrix with 14 audio outputs and 10 audio inputs. These outputs and inputs can also be used for de-embedding HDMI audio to the audio outputs and embedding audio to the HDBaseT and HDMI outputs. The audio CAT connections, along with compatible bi-directional audio modules (PU-305BD-RX & PU-305BDA-RX) allow integration with remote sources and remote audio zones. In addition, volume, mute, treble, bass and audio lip-sink correction control are available on all direct audio outputs. Optical Audio Return (OAR) Technology allows the optical input on the PUV-1530RX receiver to be routed back to the audio matrix.
LAN connectivity provides a 100BaseT network for smart TV's or games consoles in every zone. The matrix has a built-in pattern generator which can be used to verify the video signal on any of its 10 output ports. The Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports RS232 pass-through to the receivers. The PUV-1082-4K22 is designed to be used with PUV-1530RX or PUV-1510RX receivers that can utilise the PoH and LAN capabilities of the matrix.
The PUV-1082PL-4K22
HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to
4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 10 HDMI
sources to 8 HDBaseT outputs and 2 independent HDMI2.0 outputs. HDBaseT outputs
allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the
independent HDMI outputs support cable lengths of up to 10m. This matrix
supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD,
Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video
content.
The PUV-1082PL-4K22
matrix incorporates an independent audio matrix with 14 audio outputs and 10
audio inputs. These outputs and inputs can also be used for de-embedding
HDMI audio to the audio outputs and embedding audio to the HDBaseT and HDMI
outputs. The audio CAT connections, along with compatible bi-directional
audio modules (PU-305BD-RX & PU-305BDA-RX) allow integration with remote
sources and remote audio zones. In addition, volume, mute, treble, bass
and audio lip-sink correction control are available on all direct
audio outputs. Optical Audio Return (OAR) Technology allows the optical input
on the PUV-1230PL-RX receiver to be routed back to the audio matrix.
The matrix has a
built-in pattern generator which can be used to verify the video signal on any
of its 10 output ports. The Power over HDBaseT (PoH) function provides power to
compatible receivers.
Control is via manual selection
buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the
major control systems. This unit also supports RS232 pass-through to the
receivers. The PUV-1082PL-4K22 is designed to be used with PUV-1230PL-RX or
PUV-1210PL-RX receivers that can utilise the PoH capabilities of the matrix.
The PUV-1510RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 100m.
The PUV-1510TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
The PU-1530RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), OAR (Optical Audio Return), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 100m.
The PU-1530TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), OAR (Optical Audio Return), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
The PUV-442-4K22
HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to
4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 4 HDMI sources
to 4 HDBaseT Lite outputs and 2 independent HDMI2.0 outputs. The HDBaseT
outputs allow transmission via a single CAT5e/6/7 cable up to 100m, whilst the
independent HDMI outputs support cable lengths of up to 10m. This matrix
supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD,
Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video
content.
The PUV-442-4K22 matrix
incorporates an independent audio matrix with 6 audio outputs and 4 audio
inputs. These outputs and inputs can be used for de-embedding HDMI audio
to feed the audio outputs and embedding this audio to the HDBaseT and HDMI outputs.
In addition, volume, mute, treble, bass and audio lip-sink
correction control are available on all direct audio outputs. Optical
Audio Return (OAR) Technology allows the optical input on the PUV-1530PL-RX
receiver to be routed back to the audio matrix.
LAN connectivity provides a 100BaseT network for smart TV's or
games consoles in every zone. The Power over HDBaseT (PoH) function provides power to
compatible receivers.
Control is via manual
selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers
for all the major control systems. This unit also supports RS232 pass-through
to the receivers.
The PUV-442-4K22 is designed
to be used with PUV-1530RX or PUV-1510RX receivers that can utilise the PoH capabilities of the matrix.
The AU-11SA-4K22 advanced digital audio decoder is designed to de-embed 2-channel or multi-channel audio from the connected HDMI input and breakout this audio to provide
7.1 analogue audio connections, plus a 5.1 optical audio output and a HDMI bypass
output. This device supports bypass of high resolution digital audio formats including LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, and supports audio sampling rates up to 192kHz.
In addition, the AU-11SA-4K22 supports 4K video resolutions, HDMI 2.0, and HDCP 2.2 ensuring stunning results and maximum compatibility for any AV system.
The AU-1H1DD-4K22 is an advanced solution for de-embedding and down-mixing audio signals from the HDMI input (up to Dolby® Digital and DTS® 2.0+Digital Out). Connect the AU-1H1DD between the source and your display via HDMI, and select 2CH LPCM or bypass. The digital audio outputs can be set to either 2CH LPCM or bypass. The L/R analogue outputs will always output down-mixed stereo (with audio up to Dolby® Digital and DTS® 2.0+Digital Out). This device supports the latest 4K2K resolutions, HDMI2.0 and HDCP2.2 for stunning results.
The PU-IP6000RX receiver allows you to receive HDMI or VGA signals over CAT5e/6/7 network cable. This extender is a multi-function receiver that supports Ultra High-Definition signals (up to 4K2K@30Hz, YUV444) for distances up to 100m. This system is perfect for both residential and commercial installation environments.
The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.
This system also features bi-directional IR pass-through, analogue line level in/out, and microphone input provide the user with variety of audio options. The USB function allows the system to act like USB hub which, when combined with the VGA input/Output feature, it allows the system to be used as a KVM switch. Adding extra devices allows the user to cascade the system enabling them to extend the transmission distance without signal loss or introducing delay. Control is via On-screen Display (OSD), Telnet and WebGUI commands.
The PU-IP6000TX transmitter allows you to transmit HDMI or VGA signals over CAT5e/6/7 network cable. This extender is multi-function transmitter that supports the transmission of Ultra High-Definition signals (up to 4K2K@30Hz, YUV444) for distances up to 100m. This system is perfect for both residential and commercial installation environments.
The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.
This system also features bi-directional IR pass-through, analogue line level in/out, and microphone input provide the user with variety of audio options. The USB function allows the system to act like USB hub which, when combined with the VGA input/Output feature, it allows the system to be used as a KVM switch. Adding extra devices allows the user to cascade the system enabling them to extend the transmission distance without signal loss or introducing delay. Control is via On-screen Display (OSD), Telnet and WebGUI commands.
This QU-4-4K22 is more than just a Distribution Amplifier, it provides high performance audio and video support including HDR and other
features defined by the HDMI 2.0a specification. 4K UHD HDMI video sources, up
to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR,
are able to be 'Split' to the 4 x HDMI outputs. Pass-through of multiple digital
audio formats such as LPCM 7.1, Bitstream and advanced HD Bitstream with audio
sampling rates up to 192kHz are also supported. An independent HDCP management
engine for each output ensures stable HDCP performance.
When a mixture of displays with different
specifications and resolutions are connected, each output can automatically scale 4K to 1080p
or apply color space conversion (4:4:4 to 4:2:0), as appropriate, based on each
connected display’s EDID requirements. CEC "active source" command can be enabled to
periodically reset input selection on CEC compatible connected displays. This unit is controlled via front-panel switches with easy
to read status LED's.
The AU-D250-4K22 is designed to integrate and convert both analogue and digital audio signals into any AV system. This device has an in-built sample rate converter which can upscale audio signals between 44.1kHz to 192kHz (24-bit). With 4K resolution support, HDMI2.0 and HDCP2.2 compliance, the AU-D250-4K22 also enables switching of up to 4 HDMI sources to a single HDMI output, and allows the user to embed or de-embed audio within the HDMI signal path. The AU-D250 not only provides a truly enhanced listening experience, but also the flexibility to manage all audio signals in your AV system.
The PUV-662-4K22
HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to
4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 6 HDMI sources
to 6 HDBaseT outputs and 2 independent HDMI2.0 outputs. The HDBaseT outputs
allow transmission via a single CAT5e/6/7 cable up to 100m, whilst the
independent HDMI outputs support cable lengths of up to 10m. This matrix
supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD,
Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video
content.
The PUV-662-4K22 matrix
incorporates an independent audio matrix with 8 audio outputs and 4 audio
inputs. These outputs and inputs can be used for de-embedding HDMI audio
to feed the audio outputs and embedding this audio to the HDBaseT and HDMI outputs.
In addition, volume, mute, treble, bass and audio lip-sync correction control are available on all direct audio outputs. Optical
Audio Return (OAR) Technology allows the optical input on the PUV-1530RX receiver
to be routed back to the audio matrix.
LAN connectivity provides a 100BaseT network for smart TV's or
games consoles in every zone. The matrix has a built-in pattern generator
which can be used to verify the video signal on any of its 8 output ports. The
Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual
selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers
for all the major control systems. This unit also supports RS232 pass-through
to the receivers.
The PUV-662-4K22 is designed
to be used with PUV-1530RX or PUV-1510RX receivers that can utilise the PoH capabilities of the matrix.
The PUV-662PL-4K22
HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to
4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 6 HDMI sources
to 6 HDBaseT Lite outputs and 2 independent HDMI2.0 outputs. The HDBaseT
outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the
independent HDMI outputs support cable lengths of up to 10m. This matrix
supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD,
Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video
content.
The PUV-662PL-4K22
matrix incorporates an independent audio matrix with 8 audio outputs and 4
audio inputs. These outputs and inputs can be used for de-embedding HDMI
audio to feed the audio outputs and embedding this audio to the HDBaseT and
HDMI outputs. In addition, volume, mute, treble, bass and audio
lip-sync correction control are available on all direct audio outputs.
Optical Audio Return (OAR) Technology allows the optical input on the PUV-1230PL-RX
receiver to be routed back to the audio matrix.
The matrix has a built-in pattern generator which can be used to
verify the video signal on any of its 8 output ports. The
Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual
selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers
for all the major control systems. This unit also supports RS232 pass-through
to the receivers.
The PUV-662PL-4K22 is designed
to be used with PUV-1230PL-RX or PUV-1210PL-RX receivers that can utilise the
PoH capabilities of the matrix..
The AU-11CA-4K22 Audio Embedder enables you to insert
an external audio signal into any HDMI source signal. This device allows you to
insert analogue or digital stereo and multi-channel digital surround sound
signals (via Optical) to give users the flexibility to manage their audio signals within a wider AV installation. In addition to it's primary function as an audio embedder, AU-11CA-4K22 also acts as a HDMI repeater by boosting the HDMI signal enabling up to 10m HDMI cables to be run
from the HDMI output . This device supports HDMI 2.0, HDCP 2.2 and 4K resolutions
enabling flexible audio signal management into 4K ultra high definition video
signal paths.
This 4-Way HDMI Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to a single HDMI display. This switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The EL-41HP-4K22 supports all the latest features of the HDMI 2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. In addition, this switcher also features an Auto-Switching function which detects the last active input and switches to this input automatically for display. The management of source/sink configurations can be easily controlled via the on-board WebGUI LAN control, IR remote control and RS-232.
This HDBaseT DVI over CAT5e/6/7 transmitter can transmit DVI video, analogue audio, 2 LAN serving connections, control (RS-232 and bi-directional IR) and Power over Cable (PoC) over a single CAT5e/6/7 cable up to 100m. The transmitter can power the PU-DVI1109RX receiver, via the PoC function, eliminating the need for a separate power supply.
This HDBaseT DVI over CAT5e/6/7 receiver can receive DVI video, analog audio, 2 LAN serving connections, control (RS-232 and bi-directional IR) and Power over Ethernet (PoE) over a single CAT5e/6/7 cable up to 100m. The PU-DVI1109TX transmitter can power the receiver, via the PoC function, eliminating the need for a separate power supply.
The PU-1230PL-TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and OAR (Optical Audio Return) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 60m.
The PU-1230PL-RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and OAR (Optical Audio Return) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 60m.
The QU-12S Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to two identical outputs. This device is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
The QU-14S Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to four identical outputs. This device is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
The QU-18S Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
Offering the ultimate in HD performance at a real world price, the High Speed with Ethernet HDMI cable range features superior 99.999% oxygen free quality copper and durable moulded HDMI plugs ideal for hard-wearing installations where reliability is essential. Compatible with the full range of HDMI v2.0 specifications, including 4K, full 1080p and deep colour resolutions, 3D and Ethernet and Audio Return Channel (ARC), the High Speed with Ethernet HDMI cable range is available in lengths of 1m, 2m and 3m. For longer distances, please see our Premium range (HDMP)
Continuing on from the outstanding popularity of our innovative Flexi-Form HDMI cable range, installers will be pleased to hear that this range has now been further enhanced to incorporate the latest HDMI v2.0 specifications enabling support for the latest 4K resolutions. Our new Flexi-Form HDMI cable range features an innovative construction that allows them to be manipulated into any desired shape that will then be retained for the duration of the install. Flexi-Form HDMI cables are manufactured from 99.999% oxygen free copper and are compatible with 3D, full 1080P and deep colour resolutions. Ideal for the custom installer looking for a neat solution when cable dressing rack-mounted HDMI devices, they are available in short lengths of 0.3m.
For installations where space is a premium, such as wall-mounted flat-screen TV's, our latest Ultra Slim HDMI cable range offers the same high speed performance in a far more discreet package. Sporting the same specification, compatibility, and reliability as the High Speed with Ethernet HDMI cable range, Ultra Slim HDMI cable cables are available in 0.5m, 1m, 1.8m, and 3m lengths.
The PU-1210PL-RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 60m.
The PU-1210PL-TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 60m.
The QU-10-4K22 Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to ten identical outputs. This device supports 4K2K Ultra-High Definition video with HDMI2.0 and HDCP2.2 compliance. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, audio sampling rate up to 192kHz are also supported. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
This 4K Matrix Package is supplied with a PU-4H4HBTPL-4K HDBaseT LITE matrix, four PU-515PL-RX HDBaseT LITE Receivers, and one XA-HDCP HDCP Converter. The 4K HDBaseT Matrix allows the transmission of video (resolutions up to 4K2K Full HD), multi-channel digital audio from 4 HDMI sources to 4 outputs over a single CAT5e/6/7 cable (up to 60m) for each output. It supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source. This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS-232 pass-through.
The PU-515PL-RX Receivers supplied enable the user to connect four HDMI screens to each of the four receiver units which utilise Power over Cable (PoC) and do not require separate PSU's for each receiver.
This matrix package also includes a XA-HDCP converter unit. It is designed to be connected to a 4K HDCP2.2 HDMI source and set to convert the output to 4K HDCP1.4 so that the signal can be passed through the matrix to the connected 4K screens. Additional XA-HDCP units can be utilised (at extra cost) to add further 4K HDCP2,2 sources into the system, and thus effectively integrate 4K into a wider AV system where there is no requirement for every device in the signal path to be HDCP2.2 compliant.
The PU-107TX can transmit a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Transmitter unit is designed to be used with the PU-107RX to extend HDMI to a single screen.
The PU-513L-RX Receiver is for use with the PU-513L-TX Transmitter and allows uncompressed HDMI, one-way IR and RS-232 signals to be distributed over a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering
the PU-513L-RX receiver unit alternative to a mains power supply.
As
the Flagship 8x8 HDBaseT™ Matrix, the PU-8H8HBT solution offers complete HDBaseT™ convergence. Installers can switch and distribute up to 8 HDMI sources, 2-Way IR, and
PoE to lengths of up to 100m using CAT5e/6/7 cable infrastructure. Control of the matrix is via IP, RS-232, IR remote, or manual selection buttons. This single box solution will enable an installer to
confidently integrate an eight zone multi-room AV system. The PU-8H8HBT is designed to be used with the PU-507-RX Receiver which can utilise the Power over Ethernet (PoE) capabilities of the matrix.
This 4-Way HDMI Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to a single HDMI display. This switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The EL-41S-4K22 supports all the latest features of the HDMI 2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. In addition, this switcher also features an Auto-Switching function which detects the last active input and switches to this input automatically for display. Control is via IR remote control and RS-232.
This 4x4 HDMI Matrix Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to any of the four connected HDMI display. This matrix switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The unit supports all the latest features of the HDMI2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI.
The SY-4KS4K22 HDMI Scaler is designed to upscale 1080p resolutions to 4K Ultra High Definition (UHD) resolutions, or downscale a UHD 4K signal to 1080p for integration into any AV system. This scaler utilises the lastest HDMI2.0 and HDCP2.2 technology ensuring the highest level of compatibility available. The ability to downscale 4K signals to 1080p is a crucial function when working with 4K sources in a complex AV system and distributing the HDMI source signals to multiple displays which have varying resolution support.
The SY-4KS-4K22 incorporates two HDMI outputs, one of which can upscale or bypass (input follows output) and the second can downscale or bypass the incoming signal. The SY-4KS-4K22 allows the user to select the highest supported resolution between the source and the each connected display. Both the bypass output and scaled output operate simultaneously.
Additionally the SY-4KS-4K22 has a number of other key features including a Deep Colour Conversion of 12 or 10 bit conversion to 8 bit, including HDR down convert for non-HDR displays. For further compatibility with legacy displays, there is also an on-board HDCP conversion tool enabling HDCP2.2 to be converted for use with HDCP1.4 compliant displays. Lastly, the SY-4KS-4K22 has an on-board Digital to Analogue audio Converter (DAC) enabling stereo analogue audio breakout via RCA connectors on the rear of the device.
Designed to help protect your HDMI devices, the XA-HSP is a crucial tool when installing HDMI systems in locations where there can be power fluctuations caused by unstable mains power or where the site is susceptible to earthing problems or lightning strikes. Installers feedback has identified this as an issue in some geographical locations worldwide, along with applications for test beds, outside broadcast vehicles, old buildings such as places of worship, and for marine installations to name a few examples. As a completely passive device, there is no need for a PSU to be connected and thus simply connecting the XA-HSP in-line on the HDMI signal path will protect all HDMI equipment from voltage surges.
The XA-HSP is HDCP2.2 compliant and will support 4K/UHD resolutions including HDR. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio are also supported.
The CR-KP2 is a wall-mount keypad control system and is ideally suited for any AV install environment such as conference/meeting rooms, classrooms, and home cinemas allowing commands for multiple devices such as the EL-5500 to be programmed into one easy to use device. The CR-KP2 supports PoE (Power over Ethernet) or a DC power supply and allows full control of any devices that are on the same local network and support IP Telnet control, additionally the CR-KP2 also incorporates a contact-closure connection allowing control of third party devices such as a powered projector screens. The CR-KP2 includes a scheduling function allowing macros to be implemented at a pre-selected time and date, for example turning all the equipment off at the end of the day.
All the features of the CR-KP2 can be programmed using the Web Gui which can be accessed by simply searching the IP address in your internet browser.
We have also introduced our own piece of software the CYP Discovery Protocol Service which will locate any CYP product on a network and display there product code and IP address. This piece of software can be found on the downloads tab of this page along with a application guide.
The USB Digital Audio Converter is specially designed to take the audio output from a USB Audio Class 2.0 source such as a Laptop or PC and convert it to high quality 2 channel linear PCM optical digital output (TOSLink) for use with an external amplifier or active speakers with a optical digital input. It utilises a superior USB Audio processor (xMos U8A) with a maximum sampling rate up to 192kHz/24-bit providing an improved frequency response for better audio reproduction. Microsoft Windows and Mac OS X compatible.
The USB Digital Audio Converter is specially designed to take the audio output from a USB Audio source such as a Laptop or PC and convert it to high quality analogue stereo for use with headphones or earphones. It utilises a superior USB Audio processor (xMos U8A) and digital-to-analog converter (DAC) with a maximum sampling rate up to 384kHz/24-bit and an integrated amplifier for a better frequency response to avoid signal loss. Microsoft Windows and Mac OSX compatible.
The EL-6010-4K22 is a multi-format scaler with HDMI, VGA, and DisplayPort inputs scaling to the HDMI output. Ideal for boardroom or classroom applications, this device is designed to enable an installer to scale the input from the connected source device to a HDMI resolution suitable for the connected HDMI display. The maximum output resolution supported is 4K@60Hz (YUV 4:4:4).
This unit also features a selection of adjustment options you are likely to need when accommodating different sources including a wide array of aspect ratio settings as well as contrast, brightness, saturation, hue, and sharpness settings directly on the device. In addition, the EL-6010-4K22 has an analogue speaker output for ease of integration when employed in conference centres, classrooms and public venues. The auto source detection feature is designed to switch to the most recently connected source automatically and to switch to another live input if the current one becomes disconnected. This unit is controllable via front panel controls (with OSD), WebGUI, IR remote, telnet and RS-232. These comprehensive control interfaces make operation easy and intuitive.
This 4x2 HDMI Matrix Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to either of the two connected HDMI displays. This matrix switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The unit supports all the latest features of the HDMI2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI.
The CR-KP3 Wall Plate Control System Keypads are versatile and useful products for both system integrators and smart home users alike. These keypads can send commands to any Ethernet controlled device in your system. With 6 direct macro buttons (plus an additional 6 macros within the WebGUI control) which allows up to 16 commands to be executed within one button press, and a total of up to 128 commands capacity within the unit, this keypad can activate a set of command scenarios in a seconds. The soft and colorful LED buttons are suitable for all environments and PoE (Power over Ethernet) support allows for creative placement of the keypad within your space without concern for location near to a power source. Additionally, the integrated clock and calendar based scheduling feature allows you to trigger macros to control devices within your installation at a specific time, or on a recurring schedule.
The USB Digital Audio Converter is specially designed to take the audio output from a USB Audio Class 2.0 source such as a Laptop or PC and convert it to high quality 2 channel linear PCM coaxial digital output (S/PDIF) for use with an external amplifier or active speakers with a coaxial digital input. It utilises a superior USB Audio processor (xMos U8A) with a maximum sampling rate up to 384kHz/24-bit providing an improved frequency response for better audio reproduction. Microsoft Windows and Mac OS X compatible.
The CR-CS2 is a simple Control System for a wide variety of connected devices. It has 16 user defined macro events stored within the unit activated via the WebGUI or by telnet, eight of which can also be activated by the external trigger connections. User defined macros can
send commands to remote devices via Ethernet, IR (x4), relay trigger (x4), or
RS-232/422/485 (x1) allowing for the control of a wide array of devices at the
push of a button. An integrated IR code learning function is also available,
allowing the user to store and re-transmit the IR codes sent by nearly any
standard IR remote. Comprehensive user control interfaces are available
including WebGUI, telnet and console (RS-232 in). Last but not least, the CR-CS2 supports Power over Ethernet (PoE) allowing it to be powered directly from a
standard PoE network switch, without the need for an external power adapter,
allowing for simple installation.
The CR-TG1 Control Trigger Keypad is designed to be a simple and effective alternative for more complex control systems. This keypad features a set of 8 buttons which directly activate 8 trigger outputs which can be attached to any compatible control system.
The keypad’s connection cable allows the installer to extend system control to locations that are more convenient for user, such as a Meeting Room Tables, Lecterns, Podiums, etc. The CR-TG1's understated appearance makes this keypad an elegant and decorative addition to any professional AV installation.
This is a compact yet versatile 4K UHD HDMI
and PC/HD to HDMI Scaler. It accepts a wide range of resolutions from 480i up
to 1080p/WUXGA for PC/HD and up to 4K@60Hz (4:4:4) for HDMI with the ability to
scale the output to a selectable resolution up to 4K@60Hz (4:4:4) with
simultaneous de-embedded, digital optical and analog audio outputs. This unit also supports 3D signals.
The SY-HDVGA-4K22 also has auto source detection and switching feature allowing the unit to switch automatically
to the most recently connected source, or to switch to an alternative source if
the current one becomes disconnected.
This unit has a comprehensive OSD menu that
provides the user with easy access to all settings. An integrated hot-key
design makes for rapid access to common functions such as input selection and
audio volume. This is an ideal device to integrate previously incompatible sources
and displays or to provide a flexible auto-detecting input point for multiple installation scenarios.
The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to many receivers or many to many, your possibilities are endless. Simplicity is at the core of the IP-7000 as both the transmitter and receiver support PoE.
The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.
This system also features bi-directional IR pass-through, analogue line level in/out, and microphone input provide the user with variety of audio options. The USB function allows the system to act like USB hub which, when combined with the VGA input/Output feature, it allows the system to be used as a KVM switch. Adding extra devices allows the user to cascade the system enabling them to extend the transmission distance without signal loss or introducing delay. Control is via On-screen Display (OSD), Telnet, IR Remote, WebGUI and RS-232 commands.
The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to many receivers or many to many, your possibilities are endless. Simplicity is at the core of the IP-7000 as both the transmitter and receiver support PoE.
The video and audio can be transmitted via an IP network for
distances up to 100m through a single network switch. The transmission
distance can be further extended up to 100m between network switches and
supports Gigabit networks.
This system also
features bi-directional IR pass-through, analogue line level in/out,
and microphone input provide the user with variety of audio options. The
USB function allows the system to act like USB hub which, when combined
with the VGA input/Output feature, it allows the system to be used as a
KVM switch. Adding extra devices allows the user to cascade the system
enabling them to extend the transmission distance without signal loss or
introducing delay. Control is via On-screen Display (OSD), Telnet, IR
Remote, WebGUI and RS-232 commands.
This 4K UHD 4 by 4 Matrix provides the ability to connect up to four
4K UHD HDMI sources to up to four 4K UHD HDMI displays and freely
switch between them. This unit comes with full support for 18Gbps
(6G) and resolutions up to and including 4K@60Hz (4:4:4, 8-bit) as
well as support for 48-bit Deep Color, HDR (High Dynamic Range), HD
audio and other features defined by the HDMI 2.0 specification. With
a comprehensive EDID management feature that includes the ability
to select between built in default EDID, EDID copied from connected
sink devices, as well as a configurable EDID, this matrix can solve
many inter-connectivity problems. This unit also features four USB ports
which supply up to 5V/1A power for use with connected optical fiber
or AOC fiber cable extenders or CAT5 balun extenders.
The built in OSD allows the user to display text on screen.
Each output is capable of displaying up to 2 lines of text on top of the video source
in the color of your choice. The unit can be controlled using the
OSD as well as RS-232, telnet, WebGUI, and IR remote control.
The RE-101-4K22 is designed to enhance and stabilize high-bandwidth HDMI signals, allowing the user to extend a UHD 4K, HDMI 2.2 signal an additional 5m whilst also providing the function of customized EDIDs. The
built in EDID management support allows the user to easily switch between three
distinct EDIDs (Internal, External, and User). With the use of the optional PC
software it is possible to create, edit, upload or download the customized User
EDID. The unit’s toggle switch and simple LED design allows the user to
quickly switch between different configurations while viewing EDID status
information.
The
RE-EDID-4K22 is designed to manage and manipulate the HDMI/DVI EDID information
provided to a HDMI source device by a connected display. EDID contains critical
information about the capabilities of the connected display, including audio
and video format support, HDMI feature support, etc. This product aims to
simplify the technical complications that often arise when performing video
system integration, home cinema installation, integrating commercial displays
or audio/video equipment testing. It also supports EDID Emulation and
Bypass modes. This device is perfect to overcome source and screen
compatibility issues, particularly when integrating PC's into an AV system.
The PUV-1550SRX Receiver supports video resolutions up to 4K UHD along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN and Optical Audio Return (OAR) over a single Cat5e/6/7 cable up to 100m. While the HDBaseT input is limited
to a maximum of 4K@60Hz (4:2:0), this unit can automatically convert or scale
the input to display 4K@60Hz (4:4:4) at the receiving end depending on the detected capability of the
connected display panel. Conversely the user can downscale 4K UHD content to 1080p for simple integration of older displays. A useful troubleshooting feature of PUV-1550SRX is a 6G UHD HDMI Pattern Generator for testing locally connected displays. In addition to the full 5Play™ convergence, digital OAR
(Optical Audio Return) provides users the ability to transmit Optical Audio (48kHz) to the HDBaseT TX. The RX also features a analogue audio output providing users with total audio flexibility. The PUV-1550SRX also has on board EDID Management which is useful when troubleshooting connected displays.
The
PUV-2010TX Wall Plate Transmitter enables transmission of video
resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH
(Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising
the latest HDBaseT™ 2.0 technology, this solution provides advanced
signal management and dedicated audio pathways to ensure reliable
results in the most demanding of installation environments. In addition to
the full 5-Play convergence, this device also incorporates OAR (Optical
Audio Return) and ARC (Audio Return Channel) functions which enable
audio from a compatible display to be routed back from the receiver unit
to the transmitter. All audio, video, control, and power are
transmitted simultaneously over a single CAT6a/7 cable up to 100m.
This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x 2 USB ports, giving the PU-2010RX Receiver the ability to act like a USB hub.
This wall plate variant of the PUV-2010TX transmitter enables seamless integration into a standard UK double-gang back box.
The
PUV-2010RXWP UK Wall Plate Receiver supports video resolutions up to 4K UHD,
along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN,
and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0
technology, this solution provides advanced signal management and
dedicated audio pathways to ensure reliable results in the most
demanding of installation environments. In addition to the full 5-Play
convergence, this device also incorporates OAR (Optical Audio Return)
and ARC (Audio Return Channel) functions which enable audio from a
compatible display to be routed back from the receiver unit to the
transmitter. All audio, video, control, and power are transmitted
simultaneously over a single CAT6a/7 cable up to 100m.
This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x USB ports, giving the PU-2010RXWP Receiver the ability to act as a USB hub.
This wall plate variant of the PUV-2010RX receiver enables seamless integration into a standard UK double-gang back box.
The PUV-1550STX HDBaseT Transmitter/Scaler enables
transmission of video resolutions up to 4K UHD, along with HD audio,
2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up
to 100m. As well as a HDMI input, this unit features a local
HDMI output supporting video signals up to 4K@60Hz (4:4:4, 8-bit) and 4K@24Hz HDR. Full 4K UHD content for
transmission over the HDBaseT output signal can be converted to 4K@60Hz
(4:2:0, 8-bit) or 1080p@60Hz, in order to fit within HDBaseT
bandwidth limitations (10.2Mbps). Simple 4K UHD test patterns can also be outputted. 1080p signals can also be upscaled to 4K UHD and transmitted to the receiver. Control of remote devices is possible via bi-directional RS-232, IR
ports as well as a LAN connection. A analogue audio output provides
users with the ability to receive Optical Audio transmitted from the PUV-1550SRX or de-embed audio from the HDMI source. The PUV-1550SRX also has on board EDID Management which is useful when troubleshooting connected displays.
The
CYP HDMP-500M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 5 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full
range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p)
and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and
ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:
This
new development ensures that the CYP range of professional HDMI cables
has been tested and certified to meet the requirements of Premium HDMI
cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium
HDMI Cable has encrypted data in the QR code which will allow you to
quickly verify the authenticity of the cable by using your smart phone
with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably
enjoy viewing 4k UHD content without interference or signal/connectivity
issues.
The
CYP HDMP-300M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 3 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full
range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p)
and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and
ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:
This
new development ensures that the CYP range of professional HDMI cables
has been tested and certified to meet the requirements of Premium HDMI
cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium
HDMI Cable has encrypted data in the QR code which will allow you to
quickly verify the authenticity of the cable by using your smart phone
with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably
enjoy viewing 4k UHD content without interference or signal/connectivity
issues.
The
CYP HDMP-200M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 2 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full
range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p)
and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and
ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:
This
new development ensures that the CYP range of professional HDMI cables
has been tested and certified to meet the requirements of Premium HDMI
cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium
HDMI Cable has encrypted data in the QR code which will allow you to
quickly verify the authenticity of the cable by using your smart phone
with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably
enjoy viewing 4k UHD content without interference or signal/connectivity
issues.
The
CYP HDMP-100M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 1 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full
range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p)
and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and
ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:
This
new development ensures that the CYP range of professional HDMI cables
has been tested and certified to meet the requirements of Premium HDMI
cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium
HDMI Cable has encrypted data in the QR code which will allow you to
quickly verify the authenticity of the cable by using your smart phone
with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably
enjoy viewing 4k UHD content without interference or signal/connectivity
issues.
The
CYP HDMP-050M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 0.5 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full
range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p)
and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and
ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:
This
new development ensures that the CYP range of professional HDMI cables
has been tested and certified to meet the requirements of Premium HDMI
cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium
HDMI Cable has encrypted data in the QR code which will allow you to
quickly verify the authenticity of the cable by using your smart phone
with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably
enjoy viewing 4k UHD content without interference or signal/connectivity
issues.
The QU-8-4K22 Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device supports 4K2K Ultra-High Definition video with HDMI2.0 and HDCP2.2 compliance. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, audio sampling rate up to 192kHz are also supported. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
Whether a conventional point-to-point system or a fully fledged multi-zone environment, organisation organisation of the numerous components is essential when creating the perfect installation. The equipment rack can typically become a very complex place, especially when employing multiple point-to-point extenders, repeaters and break out boxes.
The RAX series of racking solutions offers installers the ideal solution to house multiple components neatly and securely, but still offering simple access for servicing. The RAX-300 is a 3U rack mount housing conforming to standard rack depth and width sizes. The RAX-300 is capable of housing up to 15 individual components.
A range of accessories are also available to power, cool and aesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break
out boxes.
The RAX series of racking solutions offers installers
the ideal solution to house multiple components neatly and securely, but
still offering simple access for servicing. The RAX-600 is a 6U rack
mount housing conforming to standard rack depth and width sizes. The
RAX-600 is capable of housing up to 15 individual components.
A range of accessories are also available to power, cool and aesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break
out boxes.
The RAX series of racking solutions offers installers
the ideal solution to house multiple components neatly and securely, but
still offering simple access for servicing. The RAX-B-300 is a 3U blanking plate compatible with the RAX-300.
A range of accessories are also available to power, cool, as well aesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break
out boxes.
The RAX series of racking solutions offers installers
the ideal solution to house multiple components neatly and securely, but
still offering simple access for servicing. The RAX-B-600 is a 6U blanking plate compatible with the RAX-600.
A range of accessories are also available to power, cool and aesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break
out boxes.
The RAX series of racking solutions offers installers
the ideal solution to house multiple components neatly and securely, but
still offering simple access for servicing. The RAX-FAN-300 is a 3U cooling fan component compatible with the RAX-300 series.
A range of accessories are also available to power and asaesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break
out boxes.
The RAX series of racking solutions offers installers
the ideal solution to house multiple components neatly and securely, but
still offering simple access for servicing. The RAX-FAN-600 is a 6U cooling fan component compatible with the RAX-600 series.
A range of accessories are also available to power and asaesthetically complete the installation.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break-out boxes.
The RAX DC Power Manager is the perfect solution for providing multiple devices with 5V DC power within the RAX enclosure. As well as 8 x 5V DC power outlets the Power Manager can provide power for up to 2 x RAX-FAN-300s. Control of the RAX-FAN modules can be accessed using the on-board WebGUI, Telnet or RS232. The speed of the fans can be thermostatically controlled in three stages by the Power Manager depending on the users preference. Alternatively, the fans can be set at a single speed.
Each of the 8 power outputs can be individually controlled by the Power Manager. Using the WebGUI, schedules and events can be created to power specific outputs at specific times, or for single events. In the event of loss of power to the Power Manager, the unit is equipped with a battery back up to preserve the memory of the event log until power is restored.
Detailed system information can also be accessed via the WebGUI including power inputs/outputs, current fan speed and system temperature.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous components is
essential when creating the perfect installation. The equipment rack can
typically become a very complex place, especially when employing
multiple point-to-point extenders, repeaters and break-out boxes.
The
RAX DC Power Manager is the perfect solution for providing multiple
devices with 48V DC power within the RAX enclosure. As well as 8 x 48V
DC power outlets the Power Manager can provide power for up to 2 x
RAX-FAN cooling modules. Control of the RAX-FAN modules can be accessed
using the on-board WebGUI, Telnet or RS232. The speed of the fans can be
thermostatically controlled in three stages by the Power Manager
depending on the users preference. Alternatively, the fans can be set at
a single speed.
Each of the 8 power outputs can be individually
controlled by the Power Manager. Using the WebGUI, schedules and events
can be created to power specific outputs at specific times, or for
single events. In the event of loss of power to the Power Manager, the
unit is equipped with a battery back up to preserve the memory of the
event log until power is restored.
Detailed system information
can also be accessed via the WebGUI including power inputs/outputs,
current fan speed and system temperature. PC software is also available
for download, enabling the user to view power reports of the connected
equipment.
The new PUV-1710LTX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be transmitted along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) signals up to a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are transmitted simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT technology, this groundbreaking product enables data rates of up to 18Gbps to be transmitted using AVLC (Adaptive Visually Lossless Compression) Technology. The transmitter enables 4KUHD sources up-to and including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR (Including Dolby Vision) to be extended to a compatible receiver. The result is a perfect 4K 6G visually lossless image delivered to the display screen.
The new PUV-1710LRX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT™) signals from a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby® Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1810TX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be transmitted along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals up to a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are transmitted simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be extended to a compatible receiver. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
The new PUV-1810RX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals from a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The PUV-1650TX has been designed with collaboration in mind, it's the perfect turnkey solution for extending and switching video in commercial applications. The PUV-1650TX/RX not only provide total AV conversion and extension, they also add a level of system control throughout the meeting space. The unit includes HDMI, DisplayPort & VGA inputs offering total meeting space compatibility.
Sources can be transmitted upto 100m (1080p) and 4K@60Hz (4:2:0 8-bit) can be transmitted over 70m over CAT 6/7 cable. The compatible receiver can scale the HDBaseT video source or local HDMI input to match the connected displays resolution requirements.
The PUV-1650 differs from other HDBaseT extender sets with its additional layer of control. This unit provides an interface for a remote control keypad or trigger interface which could be placed in a variety of installation scenarios (Lecterns, meeting room tables, podiums, etc...). This interface allows the user to control a wide range of devices and macro commands from the touch of a button over the local network. Complimentary control products within the CYP range include the CR-TG1 & CR-KP products.
The TX also features 'Top Panel' controls for direct control of the device (with OSD) and the added benefit of a WebGUI, RS232 and LAN control. Using the WebGUI interface timed events can be stored on the unit for added system control.
A key feature of the PUV-1600 series is that the power is sent to the TX
from the mains powered RX. This offers additional flexibility when
integrating and designing meeting room solutions.
The PUV-1650RX has been designed with collaboration in mind, it's the
perfect turnkey solution for receiving and switching video in commercial
applications. The PUV-1600 series not only provide total AV conversion
and extension, they also add a level of system control throughout the
meeting space. The unit includes a HDMI Input and Output
offering total meeting space compatibility.
Sources can be received from upto 100m (1080p) and 4K@60Hz (4:2:0 8-bit) and over 70m by a CAT 6/7 cable. This receiver can
scale the HDBaseT video from the source or local HDMI input to match the
connected displays resolution requirements.
The PUV-1650RX differs
from other HDBaseT extender sets with its on board control relays that can be activated in a number of ways defined by the user. This could include, IP, RS232, Trigger or Push Button control. Complimentary control products
within the CYP range include the CR-TG1, CR-CS2 & CR-KP products.
A key feature of the PUV-1600 series is that the power is sent to the TX from the mains powered RX. This offers additional flexibility when integrating and designing meeting room solutions.
The PUV-1610TX Transmitter enables transmission of video resolutions up
to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
transmitted simultaneously over a single CAT6a/7 cable up to 100m.
A key feature of the PUV-1600 series is that the power is sent to the TX
from the mains powered RX. This offers additional flexibility when
integrating and designing commercial AV systems.
The PUV-1610RX Receiver will accept transmitted video resolutions up
to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
received simultaneously over a single CAT6a/7 cable up to 100m.
A key feature of the PUV-1600 series is that the power is sent to the TX
from the mains powered RX. This offers additional flexibility when
integrating and designing meeting room solutions.
The AU-A220 is a compact 2 channel Digital Amplifier perfect for providing high quality audio distribution into various AV zones within any multi-room installation. This advanced
solution can integrate digital and analogue audio signals from AV sources within the rack enclosure, or receive an audio input from a compatible matrix to distribute the audio to a variety of zones. The small form factor of the amplifier makes it the ideal solution to be placed within a rack enclosure or behind a display in a local zone if required.
The AU-A220 is also compatible with the RAX-300 series, offering installers increased flexibility when mounting multiple units in a rack enclosure. Up to 4 amplifiers can also be powered by a RAX-PSU-24V. Input selection and volume control is possible via the front panel buttons or RS-232 control.
Testing the integrity of an HDMI cable is essential for any professional AV Installer. As commercial and residential systems are upgraded the demands on HDMI
cables to deliver the best possible image are becoming greater and can often be overlooked, particularly when delivering HDR content.
The XA-3P is the perfect installation partner for an AV installer, providing a convenient way to test and verify all aspects of an HDMI Signal Path, including the source and the sink. As well as being HDMI 2.0a and HDCP 1.4 & 2.2 compliant, the unit has a number of testing features including... System Analyzing, Cable Testing, Pattern Generator & EDID Management. The XA-3P also has scaling functionality enabling the user to down-scale a 4K UHD Source to 1080p in Analyzer Mode.
A key feature of the XA-3P is the Cable Testing mode. In this mode the user can test the integrity of a HDMI cable, this is especially useful when trying to determine if a cable is capable of passing data rates of up to 18Gbps. The test results can be displayed on the LCD display or a connected display.
The front panel controls are very simple to navigate and the HDMI I/O is easily accessed on the top of the device. The XA-3P is battery operated giving the AV Installer ultimate flexibility in challenging installation scenarios. The battery can be recharged via it's USB connector or mains powered through the same port.
The IP-CS7 is a powerful and flexible installation solution for controlling the CYP range of IP-6000's and IP-7000's. It is capable of simultaneously managing multiple IP extenders across the same network. The unit only requires installation within your network to start the configuration process. The IP-CS7 will search and discover all Transmitters and Receivers on the network, enabling simple configuration of a uni-cast or multicast installation.
When using the IP-CS7 WebGui, it is possible to define and control all of the TX/RX's on the network. It also allows the user to create pre-determined switching groups or presets for added control. The on board set up 'Wizard' adds simplicity to the installation process, guiding the installer through the setup and control features of the unit.
Dual LAN connectivity on the device allows the system to run on a bespoke IP network whilst the additional LAN allows for connection to a secondary network for control and configuration. This is particular useful when access maybe prohibited via the LAN network, the IP-CS7 provides a direct link to the IP video network.
Using the WebGui the user has access to a 'Monitor & Control' area for simple drag and drop control and switching of sources. In this mode the user can see a preview of the content being delivered from the source. The system setup area of the WebGui has protected access rights so to prevent any changes being made to the system by other users. An alternative control method of the device can be achieved by using the Trigger Input interface. This interface allows the user to activate pre-defined functions or presets at the touch of a button. Standard control of the device can be achieved using RS-232, Telnet and the WebGui.
The
EL-21PIP is an advanced 2 Way HDMI switch with integrated Multi-view
(Picture In Picture) technology. This plug and play solution offers
advanced control and display options for the integration of 2 sources
onto a single display. The EL-21PIP is the perfect cost effective
solution for integrating a combination of sources into any
single display within any commercial or residential AV installation.
The PUV-1602TXWP Wallplate Transmitter is a HDMI/VGA switch which allows uncompressed HDMI and VGA signals to be transmitted over a Single CAT5e/6/7 cable. This
solution has the added features of analogue audio em-bedding, RS-232 and 2-way IR control
functionality over the same CAT5e/6/7 cable. These combined HDMI and
control signals can be transmitted up to lengths of 100 metres to a compatible PUV 1600 Series Receiver.
This unit also supports automatic input detection between the HDMI and the VGA inputs using hot plug detection, offering the user 'hands free' control of the device. Despite the 10.2Gbps bandwidth limitation of HDBaseT this clever transmitter will automatically convert signals of higher bandwidths ensuring any HDMI 4K signal can be passed through the HDBaseT system. The unit also features push button control on the front of the panel. The unit is powered by PoH supplied by a compatible PUV-1600 series receiver. The wall plate is designed to integrate within a standard UK double gang back box.
The PUV-1605S-TXWP Wallplate Transmitter is a HDMI/VGA switch which allows
uncompressed HDMI and VGA signals to be transmitted over a Single
CAT5e/6/7 cable. This
solution has the added features of analogue audio em-bedding, RS-232 and
2-way IR control
functionality over the same CAT5e/6/7 cable. These combined HDMI and
control signals can be transmitted up to lengths of 100 metres to a
compatible PUV 1600 Series Receiver.
The HDMI input supports resolutions up to 4K@60Hz (4:4:4 8-Bit). The VGA input supports resolutions up to WUXGA (RGB) and with the use of the 3.5mm audio mini-jack input, stereo audio can be em-bedded and transmitted. Despite the 10.2Gbps bandwidth limitation of HDBaseT, 4K HDMI video sources up to and including 4K@60Hz (4:4:4 8-Bit) can be scaled to your desired resolution ensuring you deliver the right signal to the display.
This unit also supports
automatic input detection between the HDMI and the VGA inputs using hot
plug detection, offering the user 'hands free' control of the device.
The unit also features push button control on the front of the panel.
The unit is powered by PoH supplied by a compatible PUV-1600 series
receiver. The wall plate is designed to integrate within a standard UK
double gang back box.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous components is
essential when creating the perfect installation. The equipment rack can
typically become a very complex place, especially when employing
multiple point-to-point extenders, repeaters and break-out boxes.
The
RAX DC Power Manager is the perfect solution for providing multiple
devices with 24V DC power within the RAX enclosure. As well as 8 x 24V
DC power outlets the Power Manager can provide power for up to 2x
RAX-FAN cooling modules. Control of the RAX-FAN modules can be accessed
using the on-board WebGUI, Telnet or RS232. The speed of the fans can be
thermostatically controlled in three stages by the Power Manager
depending on the user's preference. Alternatively, the fans can be set at
a single speed.
Each of the 8 power outputs can be individually
controlled by the Power Manager. Using the WebGUI, schedules and events
can be created to power specific outputs at specific times, or for
single events. In the event of loss of power to the Power Manager, the
unit is equipped with a battery back up to preserve the memory of the
event log until power is restored.
Detailed system information
can also be accessed via the WebGUI including power inputs/outputs,
current fan speed and system temperature. PC software is also available
for download, enabling the user to view power reports of the connected
equipment.
The OR-88U-4K22 8x8 Matrix provides the ability to
connect up to eight 4K UHD HDMI sources to up to eight 4K UHD HDMI displays and
freely switch between them. This unit comes with full support for 18Gbps
(6G) resolutions up to, and including 4K@60Hz (4:4:4, 8-bit) as well as
support for 16-bit Deep Color up to 1080p@60Hz, HDR (High Dynamic Range), HD
audio and other features defined by the HDMI 2.0a specification. With a
comprehensive EDID management feature that includes the ability to select
between built in default EDID, copied EDID from connected sink devices, as well
as a configurable EDID, this matrix can solve many inter-connectivity problems.
This unit also features eight USB ports
which supply up to 5V/1A power for use with connected AOC (Active Optical
Cable) fiber cable extenders. By using these specialized cables your HDMI
content can be extended much further than would be possible with normal HDMI
cables. The built-in OSD has the ability to display user defined text, enabling each output to display 2 lines of custom text on
top of the video source in the color of your choice. This unit provides an
intuitive set of front panel controls with an LCD, RS-232, Telnet,
WebGUI, and IR remote control options.
The new PUV-1830RX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals from a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m. Using the OAR (Optical Audio Return) feature, audio can be sent from the display or local source back to the TX.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1830TX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be transmitted along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals up to a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are transmitted simultaneously over a single CAT6a/7
cable up to 70m. This unit also features OAR (Optical Audio Return) allowing the user to extract Optical Audio transmitted from the HDBaseT Receiver.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be extended to a compatible receiver. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
This HDMI/DisplayPort/VGA to HDMI Scaler with HDBaseT LITE Output is designed to switch and scale up to 5 AV inputs to simultaneous HDMI and HDBaseT LITE outputs at resolutions up
to 1080p/WUXGA. The HDBaseT LITE output enables the user to send the
signals up to 60m over a single CAT5e/6/7 cable and supports PoH (Power
over HDBaseT 48v) to provide power to the connected HDBaseT LITE receiver
(PUV-1230PL-RX, PUV-1210PL-RX). Additionally, this device offers 3
analogue Line level audio inputs, Optical, Digital Coax and a Line level output.
Beyond video switching and scaling, this
unit is also supports Optical Audio Return (OAR). This
feature enables optical audio sent from a compatible HDBaseT Receiver
to this unit for local playback. An integrated audio DSP with gain control for
routing audio and controlling background audio levels adds to the versatility
of this Presentation Switch.
The system can be controlled and easily configured via WebGUI, IR remote control or RS-232. This device is an ideal solution for presentation facilities within a classroom, conference room or corporate meeting space.
The
EL-7500V is an advanced rack-mountable HDMI, VGA, Composite and
Component presentation switcher. This
device
can scale and switch input sources to its HDMI, VGA and HDBaseT™ outputs, with their associated audio signals to the native resolutions
supported by the connected display. Control is via the IR remote,
RS-232, IP, WebGUI or via manual selection buttons with OSD (On Screen Display). Both digital and analogue
stereo audio is supported via a built-in DAC (Digital to Analogue
Converter) and ADC (Analogue to Digital Converter).
The HDBaseT output provides great versatility to extend your audio and video up to 70 metres over a single run of
Cat.5e/6/7 cable. The HDBaseT output can provide 48V PoH power to compatible
HDBaseT Receivers.
The EL-7500V is the
perfect solution for any educational or commercial environment requiring
integration of multiple sources and signal formats to multiple simultaneous output formats.
The PUV-1620S-TX is designed to scale and
convert HDMI and PC video, with optional analogue audio embedding, for extension
over long distances to a compatible PUV-1600 Series HDBaseT Receiver. The HDMI input supports
resolutions up to 4K@60Hz (4:2:0) and the VGA input supports resolutions up to 1080p@60Hz/WUXGA@60Hz. The scaled HDBaseT output supports resolutions from 640×480@60Hz up to
4K@60Hz (4:2:0, 8-bit) and provides the ability to adjust the image with a
number of fine tuning options including: contrast, brightness, hue, saturation,
sharpness, noise reduction, and RGB levels.
In addition, this unit supports 7.1
channel LPCM digital audio as well as advanced Bitstream and HD Bitstream audio
formats via the HDMI input, or analog stereo audio may be embedded from the stereo mini-jack connector. Shortcut keys are provided to quickly
change the output resolution to 1080p or XGA when needed for quick connection
to a display or for troubleshooting purposes.
The unit can be powered
locally or via 48V PoH (Power over HDBaseT) from a compatible HDBaseT Receiver,
which allows for greater flexibility in commercial installations. The unit can be
controlled via front panel buttons with a comprehensive OSD.
The PUV-1540S-RX is designed to scale and
convert HDBaseT video and audio outputting via a local HDMI output. The HDBaseT input
supports resolutions up to 4K@60Hz (4:2:0, 8-bit). The scaled HDMI output
supports resolutions from 640×480@60Hz up to 4K@60Hz and provides the ability
to adjust the image with a number of fine tuning options including: contrast,
brightness, hue, saturation, sharpness, noise reduction, and RGB levels.
Furthermore, this unit supports passing 7.1
channel LPCM digital audio as well as advanced Bitstream and HD Bitstream audio
formats. Analogue stereo audio breakout is also available (LPCM 2.0 sources
only). Shortcut keys are provided to quickly change the output resolution to
1080p or XGA when needed for quick connection to a display or for
troubleshooting purposes.
Additionally, the unit may be powered
locally or via 48V PoH (Power over HDBaseT) from a compatible HDBaseT
Transmitter (PUV-1500 Series), which allows for greater flexibility in installations. The unit
can be controlled via front panel buttons with a comprehensive OSD.
This SY-12H-4K22 is designed to upscale 1080p
signals into 4K UHD (18Gbps) or downscale 4K UHD (18Gbps) signals into 1080p
with synchronized digital audio output. The user friendly interface provides simple control of the unit while viewing the OSD directly on the HDMI
outputs. The input signal can be outputted to both HDMI outputs simultaneously
with a different resolution on each or the unit can generate a test pattern at
a preferred video resolution for easy on-site display testing.
The unit also includes comprehensive EDID and
HDCP management, and basic signal event automation via RS-232 or CEC.
This unit can be controlled easily by the front panel buttons (with
OSD) or by RS-232.
The new PUV-1730LRX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR10 & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) signals from a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m. Using the OAR (Optical Audio Return) feature, audio can be sent from the display or local source back to the TX.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1730LRX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR10 & Dolby Vision, to be transmitted
along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) signals from a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m. Using the OAR (Optical Audio Return) feature, audio can
be received from the display and de-embedded from this Transmitter.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The QU-28S-4K22 is an advanced signal distribution tool providing high performance audio and video support including HDR and other features defined by the HDMI 2.0a specification. 4K HDR video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to be distributed across the 8 outputs. Pass-through of multiple digital audio formats such as LPCM 7.1, Bitstream and advanced HD Bitstream with audio sampling rates up to 192kHz are also supported. An independent HDCP management engine for each output ensures stable HDCP performance.
This Distribution Amplifier also includes a special “Group Mode” which allows the unit to function as two independent 1×4 splitters. When Group Mode is enabled, each of the 2 HDMI inputs are routed to their own discrete set of 4 outputs.
When a mixture of displays with different specifications are connected, each output can be configured to scale 4K to 1080p or apply color space conversion (4:4:4 to 4:2:0), as appropriate. Support for the CEC “active source” can be enabled command to periodically reset input selection on CEC compatible connected displays. This unit provides an intuitive set of front panel controls with an OSD as well as RS-232 control options.
The SDV-FRX/FTX Transmitter and Receiver set are designed to deliver high-quality, IP routable, AV extension with minimum latency. By
using a sophisticated ultra-light compression technology (lossless for most
content) it’s the perfect solution for extending 4K audio/video signals (HDMI or
DisplayPort) and data over long distance. Advanced HDMI content such as HDR (High Dynamic Range),
10-bit color and multi-channel HD Bitstream audio can be transmitted in
pass-through mode. The use of interchangeable, field replaceable, SFP+ modules
allows for transmission distances of up to 30km (Maximum transmission distance
depends on the SFP+ modules used.). Multiple control and data signals may also
be transmitted along with the audio and video, including IR, RS-232, USB (for
KVM) and Ethernet.
When combined with the optional control software, the functionality of the extenders expands
exponentially. Multiple Transmitters and Receivers may be combined with one or
more 10Gb fiber Ethernet switches and the units can be used together to form a distributed
video matrix, a multi-viewer system, or a video wall system adding to their
flexibility in large commercial installations.
The SDV-FRX/FTX Transmitter and Receiver set are
designed to deliver high-quality, IP routable, AV extension with
minimum latency. By
using a sophisticated ultra-light compression technology (lossless for
most
content) it’s the perfect solution for extending 4K audio/video signals
(HDMI or
DisplayPort) and data over long distance. Advanced HDMI content such as
HDR (High Dynamic Range),
10-bit color and multi-channel HD Bitstream audio can be transmitted in
pass-through mode. The use of interchangeable, field replaceable, SFP+
modules
allows for transmission distances of up to 30km (Maximum transmission
distance
depends on the SFP+ modules used.). Multiple control and data signals
may also
be transmitted along with the audio and video, including IR, RS-232, USB
(for
KVM) and Ethernet.
When combined with the optional control software, the functionality of the extenders expands
exponentially. Multiple Transmitters and Receivers may be combined with one or
more 10Gb fiber Ethernet switches and the units can be used together to form a distributed
video matrix, a multi-viewer system, or a video wall system adding to their
flexibility in large commercial installations.
Whether a conventional point-to-point system or a fully fledged
multi-zone environment, organisation of the numerous
components is essential when creating the perfect installation. The
equipment rack can typically become a very complex place, especially
when employing multiple point-to-point extenders, repeaters and break-out boxes.
The
RAX DC Power Manager is the perfect solution for providing multiple
devices with 12V DC power within the RAX enclosure. As well as 8 x 12V DC
power outlets the Power Manager can provide power for up to 2 x
RAX-FAN-300s. Control of the RAX-FAN modules can be accessed using the
on-board WebGUI, Telnet or RS232. The speed of the fans can be
thermostatically controlled in three stages by the Power Manager
depending on the users preference. Alternatively, the fans can be set at
a single speed.
Each of the 8 power outputs can be individually
controlled by the Power Manager. Using the WebGUI, schedules and events
can be created to power specific outputs at specific times, or for
single events. In the event of loss of power to the Power Manager, the
unit is equipped with a battery back up to preserve the memory of the
event log until power is restored.
Detailed system information
can also be accessed via the WebGUI including power inputs/outputs,
current fan speed and system temperature.
Whether a conventional point-to-point system or a fully fledged multi-zone environment, organisation of the numerous components is essential when creating the perfect installation. The equipment rack can typically become a very complex place, especially when employing multiple point-to-point extenders, repeaters and break-out boxes.
The RAX 48V Power Distribution cable is a simple solution for providing multiple devices with 48V DC power within the RAX enclosure. 8 x 48V DC power outlets are provided from the AC/DC Mains Converter. Each 48V socket has a 'Snap Locking' connector to enable simple integration with our range of compatible 48V products.
The PUV-1510RXWP Receiver will accept transmitted video resolutions up
to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
received simultaneously over a single CAT6a/7 cable up to 100m. Wall plate version designed for a UK 2-gang back box.
The PUV-1510TXWP Transmitter enables transmission of video resolutions
up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
transmitted simultaneously over a single CAT6a/7 cable up to 100m. Wall plate version designed for a UK 2-gang back box.
The EL-7300 is a compact and versatile presentation switch featuring Display Port, HDMI and VGA inputs. Any one of these inputs can be switched and scaled to your preference to the mirrored HDMI outputs. Independent audio signals can be routed with the VGA inputs of the switch. Audio can also be De-embedded at the output stage via the analogue or digital audio (ADC Conversion) outputs. The user can control the switch via IR remote, RS-232, WebGUI, Telnet or the front panel controls with OSD (On Screen Display). The EL-7300 is the perfect solution for any educational or corporate environment where AV system flexibility is essential.
The
CYP HDMP-600M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 6 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p) and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:This new development ensures that the CYP range of professional HDMI cables has been tested and certified to meet the requirements of Premium HDMI cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium HDMI Cable has encrypted data in the QR code which will allow you to quickly verify the authenticity of the cable by using your smart phone with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably enjoy viewing 4k UHD content without interference or signal/connectivity issues.
This SY-300H-4K22 accepts and outputs a wide
range of resolutions up to 4K@60Hz (4:4:4, 8-bit) with simultaneous audio
embedding and de-embedding of digital (HDMI or optical) or analogue audio.
Integrated EDID and HDCP management allow for control over the
connected sources and displays detected by the unit. The scaled HDMI output is
powered by a high quality single-pass scaling engine with the ability to adjust
the image with a number of fine tuning options including: contrast, brightness,
hue, saturation, sharpness, noise reduction, and RGB levels. 3-D motion
adaptive de-interlacing and frame rate conversion is supported as well.
The HDMI input and output supports passing
up to LPCM 7.1 digital audio as well as Bitstream and HD Bitstream audio
formats. Audio embedding and de-embedding is also available with the included
digital optical and analogue stereo audio inputs and outputs (LPCM 2.0 only).
Shortcut keys allow the user to quickly change the output resolution to
1080p@60Hz or XGA when needed for quick connection to a display or for
troubleshooting purposes.
This is an ideal device to integrate
previously incompatible sources and displays in your boardroom, classroom, or
home. This unit is controlled via a comprehensive On-Screen Display (OSD) menu
that provides the user with easy access to all settings.
Introducing the Brand New MA-421, the perfect AV distribution solution for apartments and small residential installations or even family homes. Offering four HDMI inputs, one HDBaseT output, one HDMI with mirrored HDBaseT output, 20w power amplifier and app control, the MA-421 is our latest AV Distribution Matrix and the first to feature our new CYP Control app.
Included in the system is a compatible PUV-1710LRX-AVLC Receiver, giving you instant flexibility to add a second zone to your system.
Small enough to be placed in an AV cabinet, the MA-421 has been designed for simplicity. Our AVLC (Adaptive Visually Lossless Compression) technology ensures full 4K60 and 4K HDR/Dolby® Vision compatibility out to both HDBaseT outputs, whilst the on-board amplifier adds sound reinforcement by using the ARC audio return pathway to pull the audio signal back from the connected TV to the built-in amplifier and line output, the perfect partner with any soundbar or bookshelf speakers you way wish to use!
Any of the three outputs can be scaled to accommodate a 1080p display that might be included in your home set up! IR control with learning function (RS-232 and WebGUI is also available) enables it to be used with a programmable remote control. To further enhance the user-experience, our new CYP Control app can be programmed with all sources and display device controls, offering a single universal remote control for the whole system.
The
PUV-1082-PRO is designed for the Professional AV Installer based on the hugely successful PUV-1082-4K22. The Matrix supports the transmission of video
(resolutions up to 4K UHD 10/12-bit HDR & Dolby Vision, HDCP 2.2, HDMI2.0) and multi-channel
digital audio from 10 HDMI sources to 8 HDBaseT outputs and 2
independent HDMI2.0 outputs (18Gbps). Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be extended to a compatible receiver. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
The PUV-1082-PRO supports independent video output scaling on all of the HDBaseT and HDMI outputs. This is particularly useful when transmitting a 4KHDR image from the matrix to a standard 1080p HD display within an AV setup.
This matrix supports high resolution
digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital
Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
The PUV-1082-PRO incorporates an independent audio matrix with 14 audio outputs and 10 audio inputs. These
outputs and inputs can also be used for de-embedding HDMI audio to the
audio outputs and embedding audio to the HDBaseT and HDMI outputs. The
audio CAT connections, along with compatible bi-directional audio
modules (PU-305BD-RX & PU-305BDA-RX) allow integration with remote
sources and remote audio zones. In addition, volume, mute, treble, bass and audio lip-sink correction control
are available on all direct audio outputs. Optical Audio Return (OAR)
Technology allows the optical input on the PUV-1830RX-AVLC receiver to be
routed back to the audio matrix.
LAN
connectivity provides a 100BaseT network for smart TV's or games
consoles in every zone. The matrix has a built-in pattern generator
which can be used to verify the video signal on any of its 10 output
ports. The Power over HDBaseT (PoH) function provides power to
compatible receivers.
Control
is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP
provide control drivers for all the major control systems. This unit
also supports RS232 pass-through to the receivers. The PUV-1082-PRO is
designed to be used with PUV-1830RX-AVLC or PUV-1810RX-AVLC receivers that utilise the PoH and LAN capabilities of the matrix.
The PUV-1630TTX is a brand new AV concept for the Commercial & Corporate channel. Presentation equipment in corporate meeting rooms can be difficult to operate and provide the user with challenges when connecting their source to the installed AV system. Flexible meeting rooms are also becoming more commonplace, which is where the PUV-1630TTX provides the perfect balance between ease of use and portability.
In collaboration with CMD the leading office power and lighting specialists, CYP has developed a dedicated HDBaseT switcher and Transmitter that fits seamlessly into the CMD 'Contour' range. Providing the user with a flexible AV solution that removes the boundaries of how a meeting space can be used.
The PUV-1630TTX Transmitter is a 2 x HDMI, 1 x VGA switch which allows uncompressed HDMI and VGA signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of analogue audio em-bedding and a LAN connection over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres to a compatible PUV-1600 Series Receiver. When a device is connected to the PUV-1630TTX, CEC control can be applied to 'power up' the connected display and select the correct HDMI input channel (programmed via the WebGUI).
This unit also supports automatic input detection between the HDMI and the VGA inputs using hot plug detection, offering the user 'hands free' control of the device. Despite the 10.2Gbps bandwidth limitation of HDBaseT this clever transmitter will automatically convert signals of higher bandwidths ensuring any HDMI 4KUHD signal can be passed through the HDBaseT system. The unit also features push button control on the front of the panel. The unit is powered by PoH supplied by a compatible PUV-1600 series receiver.
The DS-VWC HDMI Video Wall Rotation Processor is capable of scaling and rotating the input source to nearly any angle and size desired. Its the ideal solution for presenting sources across custom video display arrangements often found in commercial retail displays, control rooms or classrooms. HDMI Input and output resolutions up to 1080p@60Hz with LPCM audio up to 7.1 channels at 192kHz are supported. In Rotation Mode the output is locked to 1080p, but video latency is only 1 to 2 frames and the unit is capable of scaling and rotating the source, with an accuracy of 1° as required. In Scaler Mode, the unit can scale to a selection of output resolutions, up to 1080p@60Hz as well as apply video mirror, flip and freeze effects to the output.
By combining multiple units with an HDMI distribution amplifier or matrix it is possible to create varied installation of rotated displays for large video wall applications. This is perfect for creating distinct and eye-catching advertising or promotional displays limited only by your imagination. Configuring these large video walls is made simple by use of our Video Wall PC application, allowing the user to visually lay out and configure the entire video wall at one time in a graphical user interface. A number of common video wall arrangement presets are included with the software by default to make it possible to get started quickly. Basic control of the unit is provided by front panel controls with an OSD. The unit can also be controlled by Telnet, RS-232 or the Video Wall PC software.
The SDV-FTRX is designed to transmit, 4KHDR (6G) signals over a 10G IP Fiber Network with almost zero latency.Every Transceiver can be configured to function as either a Transmitter or a Receiver, providing additional flexibility for any installation. Using a sophisticated ultra-light compression (lossless for most content) it’s the perfect solution for extending 4K HDR video (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio can be transmitted in pass-through mode. The use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 30km (Maximum transmission distance depends on the SFP+ modules used). Multiple control and data signals may also be transmitted along with the audio and video, including IR, (RS-232 Future Development) USB (for KVM) and Ethernet.
Multiple Transceivers may be combined with one or more 10-Gigabit fiber Ethernet switches and the units can be used together to form a distributed video matrix, a multi-viewer system, or a video wall system adding to their flexibility in large event installations (Control Hardware Required). The built-in EDID and HDCP management offers additional installation flexibility. Basic configuration of the unit can be achieved via front panel buttons with an On-Screen Display (OSD). Advanced control requires optional control software and a LAN connection.
The PUV-1630TXWP Transmitter is a 2 x HDMI, 1 x VGA switch which allows uncompressed HDMI and VGA signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of analogue audio em-bedding and a LAN connection over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres to a compatible PUV-1600 Series Receiver. When a device is connected to the PUV-1630TXWP, CEC control can be applied to 'power up' the connected display and select the correct HDMI input channel (programmed via the WebGUI).
This unit also supports automatic input detection between the HDMI and the VGA inputs using hot plug detection, offering the user 'hands free' control of the device. Despite the 10.2Gbps bandwidth limitation of HDBaseT this clever transmitter will automatically convert signals of higher bandwidths ensuring any HDMI 4KUHD signal can be passed through the HDBaseT system. The unit also features push button control on the front of the panel. The unit is powered by PoH supplied by a compatible PUV-1600 series receiver.
The
SDV-CTRX is designed to transmit, 4KHDR (6G) signals over a 10G IP
Fiber Network with almost zero latency. Every Transceiver can be
configured to function as either a Transmitter or a Receiver, providing
additional flexibility for any installation. Using a sophisticated
ultra-light compression (lossless for most content) it’s the perfect
solution for extending 4KHDR video (HDMI or DisplayPort) and data.
Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and
multi-channel HD Bitstream audio can be transmitted in pass-through
mode. Multiple control and data signals
may also be transmitted along with the audio and video, including IR,
(RS-232 Future Development) USB (for KVM) and Ethernet.
Multiple
Transceivers may be combined with one or more 10-Gigabit Ethernet
switches and the units can be used together to form a distributed video
matrix, a multi-viewer system, or a video wall system adding to their
flexibility in large event installations (Control Hardware Required).
The built-in EDID and HDCP management offers additional installation
flexibility. Basic configuration of the unit can be achieved via front
panel buttons with an On-Screen Display (OSD). Advanced control requires
optional control software and a LAN connection.
The PUV-1630TXWP-UK Transmitter is a 2 x HDMI, 1 x VGA switch which allows uncompressed HDMI and VGA signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of analogue audio em-bedding and a LAN connection over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres to a compatible PUV-1600 Series Receiver. When a device is connected to the PUV-1630TXWP-UK, CEC control can be applied to 'power up' the connected display and select the correct HDMI input channel (programmed via the WebGUI).
This unit also supports automatic input detection between the HDMI and the VGA inputs using hot plug detection, offering the user 'hands free' control of the device. Despite the 10.2Gbps bandwidth limitation of HDBaseT this clever transmitter will automatically convert signals of higher bandwidths ensuring any HDMI 4KUHD signal can be passed through the HDBaseT system. The unit also features push button control on the front of the panel. The unit is powered by PoH supplied by a compatible PUV-1600 series receiver.
The new PUV-1820TX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be transmitted along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals up to a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are transmitted simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be extended to a compatible receiver. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
The PUV-1820TX-AVLC features 1 x HDMI Input as well as a local HDMI output, providing flexible integration of a local screen to the TX.
The
PUV-44XPL-AVLC is the next generation of 4 x 4 matrices from CYP, taking much of its heritage from the successful PUV-44XPL-4K22. The Matrix supports the transmission of
video
(resolutions up to 4K UHD 10/12-bit HDR & Dolby Vision, HDCP 2.2,
HDMI2.0) and multi-channel
digital audio from 4 HDMI sources to 4 HDBaseT outputs. Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be extended to a compatible receiver included in the kit. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
The
PUV-44XPL-AVLC supports independent video output scaling on two of the
HDBaseT outputs. This is particularly useful when transmitting a
4K HDR image from the matrix to a standard 1080p HD display within an AV
setup.
The HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to
60m (40m HDR Content). This matrix supports high resolution digital audio formats such as
LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD
Master Audio as well as 3D video content.
This
matrix also features audio breakout whereby de-embedded analogue L/R
audio outputs are provided for each of the HDBaseT zones (A to D). The
Power over HDBaseT (PoH) function provides power to the supplied
PUV-1710LRX-AVLC receivers which also support 2-way IR and RS-232
pass-through.
Control
is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP
provide control drivers for all major control systems.
Introducing the latest in HDMI cable technology, the CYP HDMI-AOC-20M fiber cable. AOC (Active Optical Cable) allows full 4K UHD resolution support (2160p @ 60hz) to be transmitted over 20 metres. This technology accepts the same electrical inputs as a traditional copper HDMI cable, but uses optical fiber between the connectors. AOC uses electrical to optical conversion over the directional cable ends to improve distance performance, without sacrificing any signal integrity.
The low profile cast connectors allow for easy installation of the HDMI cable and offer a secure connection to the connected source and display. The cable also offers increased flexibility and durability with its slimline narrow rubber cord. *Taking it's power from the 5V pin of the connected source, the HDMI-AOC-20M doesn't require an additional power supply to operate.
*Please note - The HDMI-AOC-20M is a directional cable and needs to be installed following the correctly labelled 'TV' & 'Source' connectors in the correct position
The PRO-F12TX from CYP is a HDMI over Fiber Transmitter designed to extend your 4K UHD HDMI signal using multi-mode fiber optic cable .
The HDMI input and output of this unit
supports resolutions up to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep
Color up to 1080p@60Hz, as well as HD audio formats and features defined by the HDMI
2.0 specification. The HDMI and Fiber outputs of this unit are mirrored,
however HDMI sources with bandwidth higher than 10.2Gbps are automatically
chroma and/or bit-depth subsampled for transmission over the fiber output. Six
pre-defined internal EDIDs, two external EDID selections and a User uploaded
EDID are available for EDID management. The unit provides front panel
control as well as RS-232, Telnet and WebGUI control options.
Using fiber optical cable provides many advantages over
traditional copper-based extension methods, including RF immunity and
electro-magnetic interference, thinner and lighter cables, and greater extension
distances (up to 300 meters per jump). Multiple fiber Transceiver (PRO-F32M) units can
be placed between the Transmitter and Receiver to increase the transmission distance up to 300m per transceiver. Multiple transceivers also increase installation flexibility and create a matrix system. The unit can be used as a simple 'point to point' fiber solution when paired with the PRO-F21RX.
